Here is my config file:
----
-*- mode: python; -*-
kernel="/boot/domU_32/vmlinuz-2.6.18-6-xen-686"
initrd="/boot/domU_32/initrd.img-2.6.18-6-xen-686"
memory = "256"
name = "VM1-2.6.18"
vif = [ 'mac=00:16:3e:00:00:01, ip=10.0.0.1' ]
netmask = "255.255.255.0"
gateway = "10.0.0.128"
disk = [ 'phy:/dev/mapper/xenvg-VM1,/dev/hda1,w',
'phy:/dev/mapper/xenvg-VM1--swap,/dev/hda2,w' ]
root = "/dev/hda1"
extra='console=hvc0 xencons=hvc0'
-----
Here is what gets printed out when using the "xm create -c
VM1-2.6.18-6" command:
-------
Linux version 2.6.18-6-xen-686 (Debian 2.6.18.dfsg.1-18etch1)
(waldi@xxxxxxxxxx) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Sun Feb 10 22:43:13 UTC 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/hda1 console=hvc0 xencons=hvc0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 2999.962 MHz processor.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
Memory: 255744k/270336k available (1580k kernel code, 6052k reserved,
588k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 7503.68 BogoMIPS (lpj=15007366)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
migration_cost=0
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1214153774.523:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
netfront: device eth0 has copying receive path.
Registering block device major 3
XENBUS: Device with no driver: device/console/0
No filesystem could mount root, tried: cramfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
------
Do you see anything fancy in the log?
Also I'd like to know what should be the folder name for modules
inside /lib/modules of my domU?
Best regards,
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home