| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] Networking problem
Setting the "bridge=eth0" didn't change anything.
The Vista guest has a network device. It's IP address comes up as
169.254.28.48 while the host is on a 192.168.1.0 network.
On the working systems (we have more than one in the office) there is
libvirtd and dnsmasq running. I've seen references to those in other Xen
help stuff (e.g. "libvirtd starts dnsmasq which does dhcp for guest OSes".
Do I need to get a libvirtd running for networking to work?
Thanks
-matthew
> -----Original Message-----
> From: Dustin Henning [mailto:Dustin.Henning@xxxxxxxxxxx]
> Sent: Thursday, June 12, 2008 1:22 PM
> To: 'Matthew Donovan'
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Networking problem
>
> Maybe you were previously using an older version, or maybe you
> compiled different than they did for the rpms you are
> referring to. Based
> on your brctl output, you should be using bridge=eth0 because peth0 is
> connected to eth0, and as such, your virtual machine,
> connected to virbr0,
> has no connection to the real world. OTOH, if you aren't
> getting a network
> device in Vista, or it is malfunctioning, I don't know what
> to tell you.
> Dustin
>
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> Matthew Donovan
> Sent: Thursday, June 12, 2008 13:08
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] Networking problem
>
> I installed Xen (3.2 testing) from source (the rpm's didn't
> work on this
> system for some reason) and when I install a Windows Vista
> guest I can't get
> the networking to work. I've gotten Vista guests working
> fine on systems
> that I installed from rpms.
>
> I'm not really sure what to look at. The output of brctl is:
>
> [root@moosen scripts]# brctl show
> bridge name bridge id STP enabled interfaces
> eth0 8000.0019b932c635 no peth0
> virbr0 8000.b62bbdcde14d yes tap0
> vif13.0
>
>
> In my Xen configuration file, the interface is specified as:
> vif = [ 'type=ioemu, bridge=virbr0' ]
>
> Could this be something to do with compiling Xen from source? Maybe I
> missed something there.
>
> Any help is appreciated.
> Thanks
> -matthew
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home