> 7) when i will run domU machine using xm create webdev_config.xen -c , it
> will start booting
> but it will got freeze , exactly at step after starting crond
>
> Using config file "./webdev_config.xen".
> Started domain webdev_labs_polarion_com
> PCI: System does not support PCI
> PCI: System does not support PCI
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> audit(1211455944.113:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key 496E59E526CA1803
> - User ID: CentOS (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> rtc: IRQ 8 is not free.
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> Xen virtual console successfully installed as xvc0
> Bootdata ok (command line is root=/dev/sda1 ro )
> Linux version 2.6.18-53.1.19.el5xen (
mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc
> version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed May 7 08:51:05 EDT
> 2008
> BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000020800000 (usable)
> No mptable found.
> Built 1 zonelists. Total pages: 133120
> Kernel command line: root=/dev/sda1 ro
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Xen reported: 2387.998 MHz processor.
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Software IO TLB disabled
> Memory: 499712k/532480k available (2358k kernel code, 23900k reserved,
> 1325k data, 172k init)
> Calibrating delay using timer specific routine.. 5973.11 BogoMIPS
> (lpj=11946225)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 2
> (SMP-)alternatives turned off
> Brought up 1 CPUs
> checking if image is initramfs... it is
> Grant table initialized
> NET: Registered protocol family 16
> ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 377A0 could not
> acquire Mutex [2] [20060707]
> ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 377A0 could not
> acquire Mutex [2] [20060707]
> Initializing CPU#1
> migration_cost=2742
> Brought up 2 CPUs
> PCI: setting up Xen PCI frontend stub
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> xen_mem: Initialising balloon driver.
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: System does not support PCI
> PCI: System does not support PCI
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> audit(1211455944.113:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key 496E59E526CA1803
> - User ID: CentOS (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> rtc: IRQ 8 is not free.
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> Xen virtual console successfully installed as xvc0
> Event-channel device installed.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> XENBUS: Device with no driver: device/vbd/2049
> XENBUS: Device with no driver: device/vbd/2050
> XENBUS: Device with no driver: device/vif/0
> XENBUS: Device with no driver: device/console/0
> Write protecting the kernel read-only data: 445k
> Red Hat nash version
5.1.19.6 starting
> Mounting proc filesystem
> Mounting sysfs filesystem
> Creating /dev
> Creating initial device nodes
> Setting up hotplug.
> Creating block device nodes.
> Loading xenblk.ko module
> Registering block device major 8
> Loading uhci-hcd.ko module
> USB Universal Host Controller Interface driver v3.0
> Loading ohci-hcd.ko module
> Loading ehci-hcd.ko module
> Loading jbd.ko module
> Loading ext3.ko module
> Loading raid1.ko module
> md: raid1 personality registered for level 1
> Loading scsi_mod.ko module
> SCSI subsystem initialized
> Loading sd_mod.ko module
> register_blkdev: cannot get major 8 for sd
> Loading libata.ko module
> Loading ata_piix.ko module
> Loading pata_marvell.ko module
> Loading dm-mod.ko module
> device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised:
>
dm-devel@xxxxxxxxxx> Loading dm-mirror.ko module
> Loading dm-zero.ko module
> Loading dm-snapshot.ko module
> Loading xennet.ko module
> netfront: Initialising virtual ethernet driver.
> netfront: device eth0 has flipping receive path.
> Waiting for driver initialization.
> Scanning and configuring dmraid supported devices
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> Scanning logical volumes
> Reading all physical volumes. This may take a while...
> No volume groups found
> Activating logical volumes
> Volume group "VolGroup00" not found
> Creating root device.
> Mounting root filesystem.
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> Setting up other filesystems.
> Setting up new root fs
> no fstab.sys, mounting internal defaults
> Switching to new root and running init.
> unmounting old /dev
> unmounting old /proc
> unmounting old /sys
> INIT: version 2.86 booting
> Welcome to CentOS release 5 (Final)
> Press 'I' to enter interactive startup.
> Setting clock : Thu May 22 07:32:31 EDT 2008 [ OK ]
> Starting udev: [ OK ]
> Setting hostname localhost.localdomain: [ OK ]
> DM multipath kernel driver not loaded
> No devices found
> Setting up Logical Volume Management: No volume groups found
> [ OK ]
> Checking filesystems
> Checking all file systems.
> [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
> /dev/sda1: clean, 19482/128256 files, 110482/256256 blocks
> [ OK ]
> Remounting root filesystem in read-write mode: [ OK ]
> Mounting local filesystems: [ OK ]
> Enabling /etc/fstab swaps: [ OK ]
> INIT: Entering runlevel: 3
> Entering non-interactive startup
> Bringing up loopback interface: [ OK ]
> Bringing up interface eth0:
> Determining IP information for eth0... failed.
> [FAILED]
> Starting system logger: [ OK ]
> Starting kernel logger: [ OK ]
> Starting sshd: [ OK ]
> Starting crond: [ OK ]
>
>
> Thanks for help!
Home