Hello Rudi,
>From that output, it looks like it has hung after the ssh service
starts. I wonder about the VIF line in your xen config file. Why is
it empty? Is vif = [ '' ] the same as accepting whatever default
adapter xen is configured to provide? How long do you let it sit
there when it appears hung. Depending on what it's trying to do, it
could take several minutes to time out, before moving onto the next
service.
You could try pressing "i" when prompted, and go through your services
one at a time, to see which one is hanging things up.
In regards to Windows, I have one hvm image of windows server 2003
which was configured using the virt-manager gui. The install was
pretty straight forward, except that Windows was unable to detect my
PC type. When I was prompted to press F6 to load additional drivers,
I pressed F5 instead, and selected "Standard PC". As I understand it,
this tells windows which HAL to use for interfacing the NT kernel with
the underlying hardware.
Gordon
On Mon, Apr 7, 2008 at 1:14 PM, Rudi Ahlers <Rudi@xxxxxxxxxxx> wrote:
>
> Gordon McLellan wrote:
>
> > I can't comment on some of the fancier images offered by jailtime, but
> > for something like Centos (or rhel), I recommend you roll your own
> > image. I created a local mirror of the Centos 5.1 files, and it takes
> > about 8 min to do a kickstart installation.
> >
> > >From what I've learned so far, xvda is provided by the xen block
> > device driver, which is either in the kernel image, or part of the
> > initial ramdisk (initrd). I see in your config file you are booting a
> > special kernel, but without special initrd. Usually they go hand in
> > hand.
> >
> > Here is my centos 5.1 xen config file. You'll note I am using an lvm
> > logical volume as the block device, instead of a loopback file.
> >
> > # cat netserver
> > # uncomment the kernel, ramdisk and extra lines for a kickstart install
> > # make sure to comment the bootloader line
> > # after the install, comment kernel, ramdisk and extra, uncomment
> bootloader
> > #kernel = "/root/xen/centos64-xen-vmlinuz"
> > #ramdisk = "/root/xen/centos64-xen-initrd.img"
> > #extra = "text ks=http://192.168.2.8/centos64-2.ks";
> > bootloader = "/usr/bin/pygrub"
> > name = "netserver"
> > memory = "256"
> > disk = [ 'phy:vg0/xen_netserver,xvda,w', ]
> > vif = [ 'bridge=xenbr0', ]
> > vcpus=1
> > on_reboot = 'restart'
> > on_crash = 'restart'
> > on_poweroff = 'restart'
> > #on_reboot = 'destroy'
> > #on_crash = 'destroy'
> > #on_poweroff = 'destroy'
> >
> > This is the site that taught me how to do a centos domu via kickstart:
> >
> > http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU
> >
> > Gordon
> >
> >
> Hi Gordon
>
> I actually want to get FreeBSD & Windows working on my CentOS 5.1 x64
> server as well, so the jailtime images seem ideal.
>
> I've modied the /etc/xen/centos.5-1.cfg file a bit, and the VPS is starting
> up, but haning at the sshd service:
>
> INIT: version 2.86 booting
> Welcome to CentOS release 5 (Final)
> Press 'I' to enter interactive startup.
> Setting clock : Mon Apr 7 13:02:55 EDT 2008 [ OK ]
> Starting udev: [ OK ]
> Setting hostname centos_pristine: [ OK ]
> Checking filesystems
> Checking all file systems.
> [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/xvda1
> /dev/xvda1: clean, 25465/128256 files, 96182/256256 blocks
> [ OK ]
> Remounting root filesystem in read-write mode: [ OK ]
> Mounting local filesystems: [ OK ]
> Enabling /etc/fstab swaps: [ OK ]
> INIT: Entering runlevel: 3
> Entering non-interactive startup
> Bringing up loopback interface: [ OK ]
> Bringing up interface eth0:
> Determining IP information for eth0... failed.
> [FAILED]
> Starting system logger: [ OK ]
> Starting kernel logger: [ OK ]
> Mounting other filesystems: [ OK ]
> Starting sshd: [ OK ]
>
> This is my config:
>
> [root@temp01 ~]# more /etc/xen/centos.5-1.xen3.cfg
> kernel = "/boot/vmlinuz-2.6.18-53.1.14.el5xen"
> ramdisk = "/boot/xen-guest-initrd"
> memory = 512
> name = "centos.5-1"
> vif = [ '' ]
> dhcp = "dhcp"
> disk = ['file:/home/centos.5-1.img,xvda1,w', 'file://centos.swap,xvda2,w']
>
>
> root = "/dev/xvda1 ro"
>
>
> > On Mon, Apr 7, 2008 at 11:58 AM, Rudi Ahlers <Rudi@xxxxxxxxxxx> wrote:
> >
> >
> > > Sadique Puthen wrote:
> > >
> > >
> > >
> > > > Rudi Ahlers wrote:
> > > >
> > > >
> > > >
> > > > > Hi
> > > > >
> > > > > Does anyone know how to use the images from
> http://www.jailtime.org/?
> > > > >
> > > > >
> > > >
> > > I've downloaded the CentOS 5.1
> > > (http://www.jailtime.org/download:centos:v5.1) to my CentOS 5.1 x64 Xen
> 3.1
> > > server, and unpacked it to my /home folder.
> > >
> > >
> > > >
> > > > > Then I took the included config file, centos.5-1.xen3.cfg and copied
> it
> > > > >
> > > > >
> > > >
> > > to /xen - and modified to my needs:
> > >
> > >
> > > >
> > > > > [root@gimbli home]# more /etc/xen/centos5-1
> > > > > kernel = "/boot/vmlinuz-2.6.18-53.1.13.el5xen"
> > > > > memory = 256
> > > > > name = "centos5-1"
> > > > > vif = [ '' ]
> > > > > dhcp = "dhcp"
> > > > > #disk = ['file:/home/vm/centos.5-1.img,sda1,w',
> > > > >
> > > > >
> > > >
> > > 'file:/home/centos.swap,sda2,w']
> > >
> > >
> > > >
> > > > > #root = "/dev/xvda1 ro"
> > > > >
> > > > > disk = [ "tap:aio:/home/vm/centos.5-1.img,xvda,w" ]
> > > > > root = "/dev/xvda ro"
> > > > >
> > > > >
> > > > >
> > > > Probably you need a initrd image built using --with=xennet
> > > >
> > > >
> > > --preload=xenblk and specify that as ramdisk= in the guest configuration
> > > file and change the /etc/fstab references in your image to xvda after
> > > loopback mounting that in dom0.
> > >
> > >
> > > > --Sadique
> > > >
> > > >
> > > >
> > > Hi Sadique
> > >
> > > I'm going to attempt this again. I've installed Xen 3.2 on my CentOS
> 5.1
> > > machine, and want to try use this jailtime image again.
> > >
> > > I've mounted /home/centos.5-1.img on /mnt/vm, edited /mnt/vm/etc/fstab
> &
> > > changed it to use /dev/xvda1
> > >
> > > # This file is edited by fstab-sync - see 'man fstab-sync' for details
> > > /dev/xvda1 / ext3 defaults 1 1
> > >
> > >
> > > From this, I realize there's no /dev/xvda on the image:
> > >
> > > [root@temp01 ~]# ll /mnt/vm/dev/x*
> > > crw-rw---- 1 root root 10, 179 Mar 25 2001 /mnt/vm/dev/xsvc
> > > crw-r--r-- 1 root root 204, 191 Mar 21 2007 /mnt/vm/dev/xvc0
> > >
> > >
> > > So, how do I get it?
> > >
> > > I'm trying to understand what you mean with the --with-xennet
> > > --preload=xenblk stuff, but I don't understand how / where to put it.
> Please
> > > elaborate?
> > >
> > >
> >
>
>
> --
>
>
> Kind Regards
> Rudi Ahlers
> CEO, SoftDux
>
> Web: http://www.SoftDux.com
> Check out my technical blog, http://blog.softdux.com for Linux or other
> technical stuff, or visit http://www.WebHostingTalk.co.za for Web Hosting
> stuff
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home