|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] Not sure if my bridge is the problem or my firewall
I'm running Xen and created a virtual os called Domain-1. So now I have two
systems, Domain-0(dom0) and Domain-1(dom1), both running fedora 8. I only
have 1 ethernet device eth0. However, for some reason, my internet doesn't
work in Domain-1.
My output for route -n on Domain-0 is:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0
virbr0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
My output for route -n on Domain-1 is:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth0
eth0 is running dhcp
I also have a linksys router with an ip address of 192.168.1.1, that router
is running dhcp. So 192.168.1.1 is my gateway to the internet. So I tried
changing domU's gateway to 192.168.1.1 with
route add default gw 192.168.1.1 eth0
but I get this error message:
SIOCADDRT: No such process
Any ideas guys? I just started using Xen, well hehe, just started using
linux after using windows all my life, so I'm new to the scene, but I'm very
thirsty for knowledge. I'm been learning tons of stuff every day about
linux, so if you can, help me out with a solution, and if you have time,
explain the solution so that I could learn. Thanks. Also, I'm posted
ipfconfig -a from Dom0 and the ifcfg-eth0 from Dom0 right below just in case
you guys need it.
ipconfig -a Dom0
eth0 Link encap:Ethernet HWaddr 00:18:F3:75:E7:72
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::218:f3ff:fe75:e772/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:362 errors:0 dropped:0 overruns:0 frame:0
TX packets:216 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:134586 (131.4 KiB) TX bytes:32756 (31.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6695 errors:0 dropped:0 overruns:0 frame:0
TX packets:6695 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11633574 (11.0 MiB) TX bytes:11633574 (11.0 MiB)
tap0 Link encap:Ethernet HWaddr 02:7D:DB:72:EA:C0
inet6 addr: fe80::7d:dbff:fe72:eac0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:51 errors:0 dropped:0 overruns:0 frame:0
TX packets:302 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:6251 (6.1 KiB) TX bytes:17106 (16.7 KiB)
tmpbridge Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:295 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0 Link encap:Ethernet HWaddr 02:7D:DB:72:EA:C0
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:51 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5537 (5.4 KiB) TX bytes:7375 (7.2 KiB)
[root@localhost trist007]# tail /etc/sysconfig/network-scripts/ifcfg-eth0
# Attansic Technology Corp. L1 Gigabit Ethernet Adapter
DEVICE=eth0
TYPE=Ethernet
ONBOOT=yes
USERCTL=no
BOOTPROTO=dhcp
PEERDNS=no
HWADDR=00:18:F3:75:E7:72
IPV6INIT=no
thanks again, let me know if you guys need anymore info.
--
View this message in context:
http://www.nabble.com/Not-sure-if-my-bridge-is-the-problem-or-my-firewall-tp16530281p16530281.html
Sent from the Xen - User mailing list archive at Nabble.com.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] Not sure if my bridge is the problem or my firewall,
trist007 <=
|
|
|
|
|