On Di, Mär 25, 2008 at 01:42:16 -0400, weiming wrote:
> Did you check the process of creating the virtual partition?
You can check
your domain U filesystem
with the commands:
mount -o loop /second/fc6_domudisk /mnt
chroot /mnt
(try to work with the chrooted system)
ls -l /sbin/init # (in chroot)
>
> On Tue, Mar 25, 2008 at 1:12 PM, Girish V <girish.xen@xxxxxxxxx> wrote:
>
> > Hello Igor and Weiming,
> > Thnaks for the replies.
> >
> > I tried changing "sda" to "hda" in the config file, but the kernel still
> > panics. The output is listed below. From a quick scan, it seems to be no
> > different from when I use sda (except for vbd 3 being used instead of vbd8)
> >
> >
> > --------------------------------------------------------------------------------------------------
> >
> > [root@localhost second]# xm create -c file-config-rh9_diskimg
> > Using config file "./file-config-rh9_diskimg".
> > Started domain fc6_new
> > Linux version 2.6.18.8-xen (
> > root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13))
> > #2 SMP Thu Mar 20 17:40:00 EDT 2008
> > BIOS-provided physical RAM map:
> > Xen: 0000000000000000 - 0000000010800000 (usable)
> > 0MB HIGHMEM available.
> > 264MB LOWMEM available.
> > ACPI in unprivileged domain disabled
> > Allocating PCI resources starting at 20000000 (gap: 10800000:ef800000)
> > Detected 6396.277 MHz processor.
> > Built 1 zonelists. Total pages: 67584
> > Kernel command line: root=/dev/hda1 ro
> > Enabling fast FPU save and restore... done.
> > Enabling unmasked SIMD FPU exception support... done.
> > Initializing CPU#0
> > PID hash table entries: 2048 (order: 11, 8192 bytes)
> > Xen reported: 3200.122 MHz processor.
> > Console: colour dummy device 80x25
> > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> > Software IO TLB disabled
> > vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
> > Memory: 251788k/270336k available (2056k kernel code, 10352k reserved,
> > 712k data, 196k init, 0k highmem)
> > Checking if this processor honours the WP bit even in supervisor mode...
> > Ok.
> > calibrate_delay_direct() failed to get a good estimate for
> > loops_per_jiffy.
> > Probably due to long platform interrupts. Consider using "lpj=" boot
> > option.
> >
> > Security Framework v1.0.0 initialized
> > Capability LSM initialized
> > Mount-cache hash table entries: 512
> > CPU: Trace cache: 12K uops, L1 D cache: 16K
> > CPU: L2 cache: 2048K
> > Checking 'hlt' instruction... OK.
> > SMP alternatives: switching to UP code
> > Freeing SMP alternatives: 16k freed
> > Brought up 1 CPUs
> > migration_cost=0
> > checking if image is initramfs... it is
> > Freeing initrd memory: 3552k freed
> > NET: Registered protocol family 16
> > Brought up 1 CPUs
> > PCI: setting up Xen PCI frontend stub
> > ACPI: Interpreter disabled.
> > Linux Plug and Play Support v0.97 (c) Adam Belay
> > pnp: PnP ACPI: disabled
> > xen_mem: Initialising balloon driver.
> > PCI: System does not support PCI
> > PCI: System does not support PCI
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> > TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> > TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> > TCP: Hash tables configured (established 16384 bind 8192)
> > TCP reno registered
> > IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
> > audit: initializing netlink socket (disabled)
> > audit(1206465527.468:1): initialized
> >
> > VFS: Disk quotas dquot_6.5.1
> > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > Initializing Cryptographic API
> > io scheduler noop registered
> > io scheduler anticipatory registered
> > io scheduler deadline registered
> > io scheduler cfq registered (default)
> > Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15
> > (usb?)
> > Failed to obtain physical IRQ 6
> > floppy0: Unable to grab DMA2 for the floppy driver
> > floppy0: no floppy controllers found
> > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> > loop: loaded (max 8 devices)
> > Xen virtual console successfully installed as xvc0
> > Event-channel device installed.
> > netfront: Initialising virtual ethernet driver.
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 50MHz system bus speed for PIO modes; override with
> > idebus=xx
> > PNP: No PS/2 controller found. Probing ports directly.
> > i8042.c: No controller found.
> > mice: PS/2 mouse device common for all mice
> > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > md: bitmap version 4.39
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > Using IPI No-Shortcut mode
> > xen-vbd: registered block device major 3
> > blkfront: hda1: barriers enabled
> > XENBUS: Device with no driver: device/console/0
> > BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> > EDD information not available.
> > Freeing unused kernel memory: 196k freed
> > usbcore: registered new driver usbfs
> > usbcore: registered new driver hub
> > USB Universal Host Controller Interface driver v3.0
> > SCSI subsystem initialized
> > Fusion MPT base driver 3.04.01
> > Copyright (c) 1999-2005 LSI Logic Corporation
> > Fusion MPT SPI Host driver 3.04.01
> > kjournald starting. Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > Kernel panic - not syncing: Attempted to kill init!
> >
> >
> > ------------------------------------------------------------------------------------------------------------------------
> > Thanks,
> > Girish
> >
> >
> >
> > On Tue, Mar 25, 2008 at 12:22 PM, Igor Chubin <igor@xxxxxxx> wrote:
> >
> > > On Di, Mär 25, 2008 at 10:29:25 -0400, weiming wrote:
> > > > seems that the driver for your hard driver controllers was not
> > > included in
> > > > the image file.
> > >
> > >
> > > Real hard disk controller is not (and should not be!)
> > > visible in a guest domain.
> > > Guest domain uses PV-interfaces to the domain 0
> > > to access devices.
> > >
> > > Try to edit your config
> > > and change sda to hda:
> > >
> > > ====================================================
> > > kernel = "/boot/vmlinuz-2.6.18.8-xen"
> > > ramdisk = "/boot/initrd.img-2.6.18.8-xen"
> > > memory = 256
> > > name = "fc6"
> > > vif = [ 'bridge=xenbr0' ]
> > > disk = [ 'file:/second/fc6_domudisk,hda1,w' ]
> > > root = "/dev/hda1 ro"
> > > ====================================================
> > >
> > >
> > >
> > > >
> > > > On Tue, Mar 25, 2008 at 9:35 AM, Girish V <girish.xen@xxxxxxxxx>
> > > wrote:
> > > >
> > > > > The bootup message after using the ramdisk is shown below.
> > > > > Thanks
> > > > > Girish
> > > > >
> > > > >
> > > --------------------------------------------------------------------------------------------------------
> > > > >
> > > > > [root@localhost second]# xm create -c file-config-rh9_diskimg
> > > > > Using config file "./file-config-rh9_diskimg".
> > > > > Started domain fc6_new
> > > > > Linux version 2.6.18.8-xen (
> > > > > root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat
> > > 4.1.2-13))
> > > > > #2 SMP Thu Mar 20 17:40:00 EDT 2008
> > > > > BIOS-provided physical RAM map:
> > > > > Xen: 0000000000000000 - 0000000010800000 (usable)
> > > > > 0MB HIGHMEM available.
> > > > > 264MB LOWMEM available.
> > > > > ACPI in unprivileged domain disabled
> > > > > Allocating PCI resources starting at 20000000 (gap:
> > > 10800000:ef800000)
> > > > > Detected 3202.737 MHz processor.
> > > > > Built 1 zonelists. Total pages: 67584
> > > > > Kernel command line: root=/dev/sda1 ro
> > > > > Enabling fast FPU save and restore... done.
> > > > > Enabling unmasked SIMD FPU exception support... done.
> > > > > Initializing CPU#0
> > > > > PID hash table entries: 2048 (order: 11, 8192 bytes)
> > > > > Xen reported: 3200.114 MHz processor.
> > > > > Console: colour dummy device 80x25
> > > > > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> > > > > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> > > > > Software IO TLB disabled
> > > > > vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
> > > > > Memory: 251788k/270336k available (2056k kernel code, 10352k
> > > reserved,
> > > > > 712k data, 196k init, 0k highmem)
> > > > > Checking if this processor honours the WP bit even in supervisor
> > > mode...
> > > > > Ok.
> > > > > Calibrating delay using timer specific routine.. 6447.39 BogoMIPS
> > > > > (lpj=32236972)
> > > > > Security Framework v1.0.0 initialized
> > > > > Capability LSM initialized
> > > > > Mount-cache hash table entries: 512
> > > > > CPU: Trace cache: 12K uops, L1 D cache: 16K
> > > > > CPU: L2 cache: 2048K
> > > > > Checking 'hlt' instruction... OK.
> > > > > SMP alternatives: switching to UP code
> > > > > Freeing SMP alternatives: 16k freed
> > > > > Brought up 1 CPUs
> > > > > migration_cost=0
> > > > > checking if image is initramfs... it is
> > > > > Freeing initrd memory: 3552k freed
> > > > > NET: Registered protocol family 16
> > > > > Brought up 1 CPUs
> > > > > PCI: setting up Xen PCI frontend stub
> > > > > ACPI: Interpreter disabled.
> > > > > Linux Plug and Play Support v0.97 (c) Adam Belay
> > > > > pnp: PnP ACPI: disabled
> > > > > xen_mem: Initialising balloon driver.
> > > > > PCI: System does not support PCI
> > > > > PCI: System does not support PCI
> > > > > NET: Registered protocol family 2
> > > > > IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> > > > > TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> > > > > TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> > > > > TCP: Hash tables configured (established 16384 bind 8192)
> > > > > TCP reno registered
> > > > > IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
> > > > > audit: initializing netlink socket (disabled)
> > > > > audit(1206452738.073:1): initialized
> > > > > VFS: Disk quotas dquot_6.5.1
> > > > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > > > > Initializing Cryptographic API
> > > > > io scheduler noop registered
> > > > > io scheduler anticipatory registered
> > > > > io scheduler deadline registered
> > > > > io scheduler cfq registered (default)
> > > > > Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type
> > > 15
> > > > > (usb?)
> > > > > Failed to obtain physical IRQ 6
> > > > > floppy0: Unable to grab DMA2 for the floppy driver
> > > > > floppy0: no floppy controllers found
> > > > > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
> > > blocksize
> > > > > loop: loaded (max 8 devices)
> > > > > Xen virtual console successfully installed as xvc0
> > > > > Event-channel device installed.
> > > > > netfront: Initialising virtual ethernet driver.
> > > > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > > > > ide: Assuming 50MHz system bus speed for PIO modes; override with
> > > > > idebus=xx
> > > > > PNP: No PS/2 controller found. Probing ports directly.
> > > > > i8042.c: No controller found.
> > > > > mice: PS/2 mouse device common for all mice
> > > > > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > > > > md: bitmap version 4.39
> > > > > NET: Registered protocol family 1
> > > > > NET: Registered protocol family 17
> > > > > Using IPI No-Shortcut mode
> > > > > xen-vbd: registered block device major 8
> > > > > blkfront: sda1: barriers enabled
> > > > > XENBUS: Device with no driver: device/console/0
> > > > > BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> > > > > EDD information not available.
> > > > > Freeing unused kernel memory: 196k freed
> > > > > usbcore: registered new driver usbfs
> > > > > usbcore: registered new driver hub
> > > > > USB Universal Host Controller Interface driver v3.0
> > > > > SCSI subsystem initialized
> > > > > register_blkdev: cannot get major 8 for sd
> > > > > Fusion MPT base driver 3.04.01
> > > > > Copyright (c) 1999-2005 LSI Logic Corporation
> > > > > Fusion MPT SPI Host driver 3.04.01
> > > > > kjournald starting. Commit interval 5 seconds
> > > > > EXT3-fs: mounted filesystem with ordered data mode.
> > > > > Kernel panic - not syncing: Attempted to kill init!
> > > > >
> > > > >
> > > > >
> > > > >
> > > --------------------------------------------------------------------------------------------------------
> > > > >
> > > > > On Sun, Mar 23, 2008 at 6:17 AM, Igor Chubin <igor@xxxxxxx> wrote:
> > > > >
> > > > > > On So, Mär 23, 2008 at 12:30:11 -0400, Girish V wrote:
> > > > > > > Hi Igor.
> > > > > > > Thanks for the suggestion. I did try using a ramdisk - and the
> > > bootup
> > > > > > of the
> > > > > > > domU goes a little bit furter, but init still crashes with the
> > > same
> > > > > > message
> > > > > > > as before.
> > > > > > > Any idea what I should do further?
> > > > > >
> > > > > >
> > > > > > What the last printed lines now?
> > > > > >
> > > > > > > Thanks,
> > > > > > > Girish
> > > > > > >
> > > > > > > On Sat, Mar 22, 2008 at 2:09 PM, Igor Chubin <igor@xxxxxxx>
> > > wrote:
> > > > > > >
> > > > > > > > On Mi, Mär 19, 2008 at 10:43:25 -0400, Girish V wrote:
> > > > > > > > > Hello,
> > > > > > > >
> > > > > > > > Hello Girish,
> > > > > > > >
> > > > > > > > ...
> > > > > > > >
> > > > > > > >
> > > > > > > > Try to specify ramdisk here:
> > > > > > > >
> > > > > > > > (check path in my example)
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > ----------------------------------------------------------------------------------------------------------------
> > > > > > > > >
> > > > > > > > > kernel = "/boot/vmlinuz-2.6.18.8-xen"
> > > > > > > > ramdisk = "/boot/initrd.img-2.6.18.8-xen"
> > > > > > > > > memory = 256
> > > > > > > > > name = "fc6"
> > > > > > > > > vif = [ 'bridge=xenbr0' ]
> > > > > > > > > disk = [ 'file:/second/fc6_domudisk,sda1,w' ]
> > > > > > > > > root = "/dev/sda1 ro"
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > ----------------------------------------------------------------------------------------------------------------
> > > > > > > > >
> > > > > > > > --
> > > > > > > > WBR, i.m.chubin
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-users mailing list
> > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > http://lists.xensource.com/xen-users
> > > > > >
> > > > > > --
> > > > > > WBR, i.m.chubin
> > > > > >
> > > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Xen-users mailing list
> > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > http://lists.xensource.com/xen-users
> > > > >
> > >
> > > --
> > > WBR, i.m.chubin
> > >
> > >
> >
--
WBR, i.m.chubin
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home