Am Thursday, den 24 January hub Mark Williamson folgendes in die Tasten:
> > I've read some threads about storage speed here but didn't really got
> > a clue on what's the "best" or fastest way to set it up.
> > At the moment all the virtual disks are configured as
> > disk = [ "phy:/dev/vg_xen1/<LV>,xvda1,w", ... ]
> > The volumes residing on the SAN storage are configured via EVMS and
> > I've 200MB/s writing speed from Dom0 (mesured with dd if=/dev/zero
> > of=/mnt/file) and "only" around 150MB/s when doing the same from DomU.
> When you do the tests of writing speed from dom0, are you writing to the
> domU's filesystem LV? Otherwise you're not testing like-for-like since
> you're using a different part of the storage. I'm not sure if this makes a
> difference in your case, but different parts of a physical disk can have
> surprisingly big differences in bandwidth (outer edge of the disk moves
> faster, so better bandwidth).
Sure I used the same EVMS volume.
Anything other would have been pointless :)
> I'm not too familiar with EVMS, maybe there's some bottleneck there I'm not
> familiar with and therefore missing. Does EVMS do cluster volume management?
>
> I guess it does, as you're using it on a SAN ;-)
Paired with heartbeat (neccessary for EVMS) there is a Cluster Volume
Manager plugin/module (maybe the buzzword is called different), so
it's somehow possible to have the volumes shared among hosts.
> > Is this expected speed loss or is there any other way to give the DomU
> > access to the devices?
> You can only give domUs direct access to whole PCI devices at the moment, so
> unless you gave each a separate SAN adaptor, you can't really give them any
> more direct access.
> There's some work on SCSI passthrough being done by various people, so maybe
> at some point that'll let you pass individual LUNs through from the SAN.
Hmm.
That would most probably not really helpful in my case as I'm not
using the /dev/sd* devices I get from the SAN about 4 ways (dual-head
HBA connected to SAN with two SPs) but the /dev/mapper/<foo> device
handled via multipathd.
OK, I could push all the according SCSI devices to the DomU and
multipath inside (if possible), but it's not a simple task to figure out
which sd* belong to which LUN as far I know of.
(Ok, multipath can do so, so there has to be a way...)
> For really high performance SAN access from domUs, the solution will
> eventually (one fine day, in the future) to use SAN adaptors with
> virtualization support that can natively give shared direct access to
> multiple domUs. We're not quite there yet though!
So let's hope :)
Thanks
Ciao
Max
--
Follow the white penguin.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home