| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] I've exhausted my brain trying to get xen toboot...pleas
Heh,
Thanks for the reply,
I finally got the dom0 kernel to boot...by building SATA and SCSI
support built-in to the kernel...
Now....D'OH! The kernel doesnt see my BCM NIC....grrr.....
It boots OK but when I do "ifconfig -a" I get all of the virtual NIC's
listed + the real loopback....but no eth0....grrrrrr
lspci lists the device as:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME
Gigabit Ethernet PCI Express
Any help?
M
On Jan 11, 2008 5:07 PM, Ryan Persaud <Ryan_Persaud@xxxxxxxxxxxx> wrote:
> Miguel,
>
> It sounds like you might be getting a kernel panic. To prevent the
> machine from rebooting after the error message displays, you can try
> specifying that Xen not reboot by appending 'noreboot' to Xen's entry in
> grub.conf (See section 10.3 of the xen manual).
>
> Earlier this week, I also thought I was not compiling the correct
> drivers in to the kernel, but it turns out that the drivers in 2.6.18
> did not support my hardware (Intel's ICH9 chipset). I had to patch a
> few source files and recompile. What does the output of 'lspci' and
> 'lspci -n' look like?
>
> The build instructions you listed are for building a custom dom0 kernel.
> To build just the Xen hypervisor, I believe you have to do 'make
> install-xen' from the root xen directory.
>
> -Ryan
>
>
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> > Lionel Kernux
> > Sent: Friday, January 11, 2008 4:18 PM
> > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: [Xen-users] I've exhausted my brain trying to get
> > xen toboot...please help
> >
> > Hi,
> >
> > I'm running slackware12 and followed the directions in the
> > README file in the xen source tree.
> >
> > I installed grub and made sure it is working properly.
> >
> > I did:
> >
> > make world
> > make install
> >
> > and added the correct stanza to the grub.conf
> >
> > then I rebooted and selected my xen kernel
> >
> > BUT
> >
> > xen boots to a certain point and then emits an error and
> > reboots. The error is difficult to see because the reboot
> > happens almost immediately after the error is displayed. From
> > what I can see, the error is "no /sbin/init found or not mounted".
> >
> > I suspected that this might be due to a lack of scsi/sata
> > drivers in the xen kernel....so I followed the README
> > instructions to build a custom kernel:
> >
> > 5. To rebuild a kernel with a modified config:
> >
> > # make linux-2.6-xen-config CONFIGMODE=menuconfig (or xconfig)
> > # make linux-2.6-xen-build
> > # make linux-2.6-xen-install
> >
> > Depending on your config, you may need to use 'mkinitrd' to create
> > an initial ram disk, just like a native system e.g.
> > # depmod 2.6.16-xen
> > # mkinitrd -v -f --with=aacraid --with=sd_mod
> > --with=scsi_mod initrd-2.6.16-xen.img 2.6.16-xen
> >
> > I made sure that ALL of the SATA/SCSI drivers are built-in so
> > there should be no need for initrd
> >
> > But after running make linux-2.6-xen-install some stuff is
> > installed to /boot but NOT the xen-3.2.0.gz that grub needs to load.
> >
> > ls -la /boot
> >
> > lrwxrwxrwx 1 root root 37 2007-12-20 04:27 README.initrd ->
> > /usr/doc/mkinitrd-1.1.2/README.initrd
> > lrwxrwxrwx 1 root root 20 2007-12-21 11:36 System.map ->
> > System.map.2.6.23.12
> > -rw-rw-r-- 1 root root 1043384 2008-01-11 15:53 System.map-2.6.18-xen
> > -rw-r--r-- 1 root root 795880 2007-06-19 16:18
> > System.map-generic-2.6.21.5
> > -rw-r--r-- 1 root root 813610 2007-06-19 15:53
> > System.map-generic-smp-2.6.21.5-smp
> > -rw-r--r-- 1 root root 1232918 2007-06-19 16:23
> > System.map-huge-2.6.21.5
> > -rw-r--r-- 1 root root 1252098 2007-06-19 15:58
> > System.map-huge-smp-2.6.21.5-smp
> > -rw-r--r-- 1 root root 1060243 2007-12-21 12:35 System.map.2.6.23.12
> > -rw-r--r-- 1 root root 512 2007-12-20 04:51 boot.0800
> > lrwxrwxrwx 1 root root 16 2007-12-21 11:37 config ->
> > config.2.6.23.12
> > -rw-rw-r-- 1 root root 65742 2008-01-11 15:53 config-2.6.18-xen
> > -rw-r--r-- 1 root root 72738 2007-06-19 16:18
> > config-generic-2.6.21.5
> > -rw-r--r-- 1 root root 72764 2007-06-19 15:53
> > config-generic-smp-2.6.21.5-smp
> > -rw-r--r-- 1 root root 72643 2007-06-19 16:23 config-huge-2.6.21.5
> > -rw-r--r-- 1 root root 72669 2007-06-19 15:58
> > config-huge-smp-2.6.21.5-smp
> > -rw-r--r-- 1 root root 56904 2007-12-21 12:34 config.2.6.23.12
> > -rw-r--r-- 1 root root 5040 2007-06-10 02:09 diag1.img
> > lrwxrwxrwx 1 root root 15 2007-12-21 11:37 latest_smp
> > -> linux-2.6.23.12
> > -rw-r--r-- 1 root root 2743736 2007-12-21 12:34 linux-2.6.23.12
> > -rw------- 1 root root 118272 2008-01-10 15:22 map
> > -rw-r--r-- 1 root root 2751320 2008-01-04 14:41 ndiskernel
> > -rw-r--r-- 1 root root 7526897 2008-01-11 15:53
> > vmlinux-syms-2.6.18-xen
> > lrwxrwxrwx 1 root root 29 2007-12-20 04:43 vmlinuz ->
> > vmlinuz-huge-smp-2.6.21.5-smp
> > lrwxrwxrwx 1 root root 18 2008-01-11 15:53 vmlinuz-2.6-xen ->
> > vmlinuz-2.6.18-xen
> > -rw-r--r-- 1 root root 3001674 2008-01-11 15:53 vmlinuz-2.6.18-xen
> > -rw-r--r-- 1 root root 1937944 2007-06-19 16:18
> > vmlinuz-generic-2.6.21.5
> > -rw-r--r-- 1 root root 2087960 2007-06-19 15:53
> > vmlinuz-generic-smp-2.6.21.5-smp
> > -rw-r--r-- 1 root root 4097784 2007-06-19 16:23 vmlinuz-huge-2.6.21.5
> > -rw-r--r-- 1 root root 4417112 2007-06-19 15:58
> > vmlinuz-huge-smp-2.6.21.5-smp
> >
> >
> > So....please...
> >
> > Any Help???/
> >
> > Thanks
> >
> > Miguel
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home