Hi,
thanks to Mark Williamson I have resolved my problem concerning the
reboot of my computer with Debian Etch and Xen : I have tried VMKnoppix
on it and it does reboot too, so I have installed the Debian system on
my laptop which can boot on the Xen Kernel.
I have installed Xen 3.1 and the 2.6.18 kernel.
I succesfully created a domU using the xen-tools but when I try to
launch my newly created domU I have an error because the domU apparently
tries to acces something that does not exists. In fact I thinks the domU
tries to acces to my dom0 filesystem because it involves sda and sda5
wich is my dom0 filesystem. I have checked in the fstab of domU and
there is no mention to sda.
Sorry Mark I have made a mistakes yesterday evening and I was forced to
reinstall my system so it isn't exactly the same error...
I send as attachment the log files that I have saved from my tries.
Best Regards
Guillaume thiery
Using config file "/etc/xen/xen1.example.com.cfg".
Started domain xen1.example.com
Linux version 2.6.18-xen (shand@endor) (gcc
version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 SMP Fri Jun 1
15:01:20 BST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000002800000 (usable)
0MB HIGHMEM available.
40MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Allocating PCI resources starting at 10000000 (gap: 02800000:fd800000)
Detected 1663.225 MHz processor.
Built 1 zonelists. Total pages: 10240
Kernel command line: root=/dev/hda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 256 (order: 8, 1024 bytes)
Xen reported: 1663.114 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Software IO TLB disabled
vmalloc area: c3000000-f51fe000, maxmem 2d7fe000
Memory: 26052k/40960k available (2100k kernel code, 6696k reserved, 740k data,
196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3327.35 BogoMIPS
(lpj=16636790)Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 2652k freed
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1199823510.239:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Failed to obtain physical IRQ 6
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
netfront: device eth0 has copying receive path.
xen-vbd: registered block device major 3
blkfront: hda1: barriers enabled
blkfront: hda2: barriers enabled
XENBUS: Device with no driver: device/console/0
Freeing unused kernel memory: 196k freed
softcursor: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
/bin/cat: /sys/block/sda/dev: No such file or directory
Waiting 1 seconds for /sys/block/sda/dev to show up
/bin/cat: /sys/block/sda/dev: No such file or directory
Waiting 2 seconds for /sys/block/sda/dev to show up
/bin/cat: /sys/block/sda/dev: No such file or directory
Waiting 4 seconds for /sys/block/sda/dev to show up
/bin/cat: /sys/block/sda/dev: No such file or directory
Waiting 8 seconds for /sys/block/sda/dev to show up
/bin/cat: /sys/block/sda/dev: No such file or directory
Waiting 16 seconds for /sys/block/sda/dev to show up
/bin/cat: /sys/block/sda/dev: No such file or directory
Device /sys/block/sda/dev seems to be down.
/bin/mknod: missing operand after `b'
Special files require major and minor device numbers.
Try `/bin/mknod --help' for more information.
/bin/cat: /sys/block/sda/sda5/dev: No such file or directory
Waiting 1 seconds for /sys/block/sda/sda5/dev to show up
/bin/cat: /sys/block/sda/sda5/dev: No such file or directory
Waiting 2 seconds for /sys/block/sda/sda5/dev to show up
/bin/cat: /sys/block/sda/sda5/dev: No such file or directory
Waiting 4 seconds for /sys/block/sda/sda5/dev to show up
/bin/cat: /sys/block/sda/sda5/dev: No such file or directory
Waiting 8 seconds for /sys/block/sda/sda5/dev to show up
/bin/cat: /sys/block/sda/sda5/dev: No such file or directory
Waiting 16 seconds for /sys/block/sda/sda5/dev to show up
/bin/cat: /sys/block/sda/sda5/dev: No such file or directory
Device /sys/block/sda/sda5/dev seems to be down.
/bin/mknod: missing operand after `b'
Special files require major and minor device numbers.
Try `/bin/mknod --help' for more information.
mount: special device /dev/sda5 does not exist
Switching root ...
/usr/lib/yaird/exec/run_init: current directory on the same filesystem as the
root: Success
Kernel panic - not syncing: Attempted to kill init!
General Infomation
--------------------
Hostname : xen1.example.com
Distribution : etch
Fileystem Type : ext3
Size Information
----------------
Image size : 2Gb
Swap size : 256Mb
Image type : sparse
Memory size : 32Mb
Kernel path : /boot/vmlinuz-2.6.18-xen
Initrd path : /boot/initrd.img-2.6.18-xen
Networking Information
----------------------
IP Address 1 : 192.168.1.125
Netmask : 255.255.255.0
Gateway : 192.168.1.1
WARNING
-------
Loopback module not loaded and you're using loopback images
Run the following to load the module:
modprobe loop loop_max=255
Creating swap image: /home/xen//domains/xen1.example.com/swap.img
256+0 enregistrements lus
256+0 enregistrements écrits
268435456 octets (268 MB) copiés, 0,932782 seconde, 288 MB/s
Done
Creating disk image: /home/xen//domains/xen1.example.com/disk.img
0+0 enregistrements lus
0+0 enregistrements écrits
1 octet (1B) copié, 2,9e-05 seconde, 0,0 kB/s
Done
Creating ext3 filesystem on /home/xen//domains/xen1.example.com/disk.img
mke2fs 1.40-WIP (14-Nov-2006)
Étiquette de système de fichiers=
Type de système d'exploitation : Linux
Taille de bloc=4096 (log=2)
Taille de fragment=4096 (log=2)
262144 i-noeuds, 524288 blocs
26214 blocs (5.00%) réservés pour le super utilisateur
Premier bloc de données=0
Nombre maximum de blocs du système de fichiers=536870912
16 groupes de blocs
32768 blocs par groupe, 32768 fragments par groupe
16384 i-noeuds par groupe
Superblocs de secours stockés sur les blocs :
32768, 98304, 163840, 229376, 294912
Écriture des tables d'i-noeuds : 0/16 1/16 2/16 3/16
4/16 5/16 6/16 7/16 8/16
9/1610/1611/1612/1613/1614/1615/16complété
Création du journal (16384 blocs) : complété
Écriture des superblocs et de l'information de comptabilité du système de
fichiers : complété
Le système de fichiers sera automatiquement vérifié tous les 38 montages ou
après 180 jours, selon la première éventualité. Utiliser tune2fs -c ou -i
pour écraser la valeur.
Done
Setting up swapspace version 1, size = 268431 kB
no label, UUID=7d754989-504b-49b5-99dd-c884bda01b6f
Installing your system with debootstrap mirror
http://ftp.lip6.fr/pub/linux/distributions/debian/
Copying files from host to image.
Copying files from /var/cache/apt/archives ->
/tmp/V7tU6Qa1eB/var/cache/apt/archives
Done
Done
I: Retrieving Release
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Checking component main on
http://ftp.lip6.fr/pub/linux/distributions/debian...
I: Validating adduser
I: Validating apt
I: Validating apt-utils
I: Validating aptitude
I: Validating base-files
I: Validating base-passwd
I: Validating bash
I: Validating bsdmainutils
I: Validating bsdutils
I: Validating coreutils
I: Validating cpio
I: Validating cron
I: Validating debconf
I: Validating debconf-i18n
I: Validating debian-archive-keyring
I: Validating debianutils
I: Validating dhcp3-client
I: Validating dhcp3-common
I: Validating diff
I: Validating dmidecode
I: Validating dpkg
I: Validating dselect
I: Validating e2fslibs
I: Validating e2fsprogs
I: Validating ed
I: Validating findutils
I: Validating gcc-4.1-base
I: Validating gnupg
I: Validating gpgv
I: Validating grep
I: Validating groff-base
I: Validating gzip
I: Validating hostname
I: Validating ifupdown
I: Validating info
I: Validating initscripts
I: Validating iptables
I: Validating iputils-ping
I: Validating klogd
I: Validating laptop-detect
I: Validating libacl1
I: Validating libattr1
I: Validating libblkid1
I: Validating libbz2-1.0
I: Validating libc6
I: Validating libcap1
I: Validating libcomerr2
I: Validating libconsole
I: Validating libdb4.2
I: Validating libdb4.3
I: Validating libdb4.4
I: Validating libdevmapper1.02
I: Validating libgcc1
I: Validating libgcrypt11
I: Validating libgdbm3
I: Validating libgnutls13
I: Validating libgpg-error0
I: Validating libldap2
I: Validating liblocale-gettext-perl
I: Validating liblzo1
I: Validating libncurses5
I: Validating libncursesw5
I: Validating libnewt0.52
I: Validating libopencdk8
I: Validating libpam-modules
I: Validating libpam-runtime
I: Validating libpam0g
I: Validating libpopt0
I: Validating libreadline5
I: Validating libsasl2
I: Validating libsasl2-2
I: Validating libselinux1
I: Validating libsepol1
I: Validating libsigc++-2.0-0c2a
I: Validating libslang2
I: Validating libss2
I: Validating libssl0.9.8
I: Validating libstdc++6
I: Validating libtasn1-3
I: Validating libtext-charwidth-perl
I: Validating libtext-iconv-perl
I: Validating libtext-wrapi18n-perl
I: Validating libusb-0.1-4
I: Validating libuuid1
I: Validating libwrap0
I: Validating login
I: Validating logrotate
I: Validating lsb-base
I: Validating makedev
I: Validating man-db
I: Validating manpages
I: Validating mawk
I: Validating mktemp
I: Validating module-init-tools
I: Validating mount
I: Validating nano
I: Validating ncurses-base
I: Validating ncurses-bin
I: Validating net-tools
I: Validating netbase
I: Validating netcat
I: Validating openbsd-inetd
I: Validating passwd
I: Validating perl-base
I: Validating procps
I: Validating readline-common
I: Validating sed
I: Validating sysklogd
I: Validating sysv-rc
I: Validating sysvinit
I: Validating sysvinit-utils
I: Validating tar
I: Validating tasksel
I: Validating tasksel-data
I: Validating tcpd
I: Validating traceroute
I: Validating tzdata
I: Validating update-inetd
I: Validating util-linux
I: Validating vim-common
I: Validating vim-tiny
I: Validating wget
I: Validating whiptail
I: Validating zlib1g
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting bsdutils...
I: Extracting coreutils...
I: Extracting debconf...
I: Extracting debconf-i18n...
I: Extracting debianutils...
I: Extracting diff...
I: Extracting dpkg...
I: Extracting dselect...
I: Extracting e2fslibs...
I: Extracting e2fsprogs...
I: Extracting findutils...
I: Extracting gcc-4.1-base...
I: Extracting grep...
I: Extracting gzip...
I: Extracting hostname...
I: Extracting initscripts...
I: Extracting libacl1...
I: Extracting libattr1...
I: Extracting libblkid1...
I: Extracting libc6...
I: Extracting libcap1...
I: Extracting libcomerr2...
I: Extracting libdb4.3...
I: Extracting libdevmapper1.02...
I: Extracting libgcc1...
I: Extracting liblocale-gettext-perl...
I: Extracting libncurses5...
I: Extracting libpam-modules...
I: Extracting libpam-runtime...
I: Extracting libpam0g...
I: Extracting libselinux1...
I: Extracting libsepol1...
I: Extracting libslang2...
I: Extracting libss2...
I: Extracting libstdc++6...
I: Extracting libtext-charwidth-perl...
I: Extracting libtext-iconv-perl...
I: Extracting libtext-wrapi18n-perl...
I: Extracting libuuid1...
I: Extracting login...
I: Extracting lsb-base...
I: Extracting makedev...
I: Extracting mawk...
I: Extracting mktemp...
I: Extracting mount...
I: Extracting ncurses-base...
I: Extracting ncurses-bin...
I: Extracting passwd...
I: Extracting perl-base...
I: Extracting procps...
I: Extracting sed...
I: Extracting sysv-rc...
I: Extracting sysvinit...
I: Extracting sysvinit-utils...
I: Extracting tar...
I: Extracting tzdata...
I: Extracting util-linux...
I: Extracting zlib1g...
I: Installing core packages...
I: Unpacking required packages...
I: Unpacking base-files...
I: Unpacking base-passwd...
I: Unpacking bash...
I: Unpacking bsdutils...
I: Unpacking coreutils...
I: Unpacking debconf...
I: Unpacking debconf-i18n...
I: Unpacking debianutils...
I: Unpacking diff...
I: Unpacking dpkg...
I: Unpacking dselect...
I: Unpacking e2fslibs...
I: Unpacking e2fsprogs...
I: Unpacking findutils...
I: Unpacking gcc-4.1-base...
I: Unpacking grep...
I: Unpacking gzip...
I: Unpacking hostname...
I: Unpacking initscripts...
I: Unpacking libacl1...
I: Unpacking libattr1...
I: Unpacking libblkid1...
I: Unpacking libc6...
I: Unpacking libcap1...
I: Unpacking libcomerr2...
I: Unpacking libdb4.3...
I: Unpacking libdevmapper1.02...
I: Unpacking libgcc1...
I: Unpacking liblocale-gettext-perl...
I: Unpacking libncurses5...
I: Unpacking libpam-modules...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g...
I: Unpacking libselinux1...
I: Unpacking libsepol1...
I: Unpacking libslang2...
I: Unpacking libss2...
I: Unpacking libstdc++6...
I: Unpacking libtext-charwidth-perl...
I: Unpacking libtext-iconv-perl...
I: Unpacking libtext-wrapi18n-perl...
I: Unpacking libuuid1...
I: Unpacking login...
I: Unpacking lsb-base...
I: Unpacking makedev...
I: Unpacking mawk...
I: Unpacking mktemp...
I: Unpacking mount...
I: Unpacking ncurses-base...
I: Unpacking ncurses-bin...
I: Unpacking passwd...
I: Unpacking perl-base...
I: Unpacking procps...
I: Unpacking sed...
I: Unpacking sysv-rc...
I: Unpacking sysvinit...
I: Unpacking sysvinit-utils...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking util-linux...
I: Unpacking zlib1g...
I: Configuring required packages...
I: Configuring sysv-rc...
I: Configuring tzdata...
I: Configuring gcc-4.1-base...
I: Configuring libpam-runtime...
I: Configuring libc6...
I: Configuring libcap1...
I: Configuring mktemp...
I: Configuring libuuid1...
I: Configuring libpam0g...
I: Configuring bsdutils...
I: Configuring perl-base...
I: Configuring libsepol1...
I: Configuring tar...
I: Configuring zlib1g...
I: Configuring libgcc1...
I: Configuring libtext-iconv-perl...
I: Configuring libncurses5...
I: Configuring libattr1...
I: Configuring sed...
I: Configuring e2fslibs...
I: Configuring base-passwd...
I: Configuring libcomerr2...
I: Configuring mawk...
I: Configuring libdb4.3...
I: Configuring grep...
I: Configuring hostname...
I: Configuring libacl1...
I: Configuring libslang2...
I: Configuring libss2...
I: Configuring findutils...
I: Configuring liblocale-gettext-perl...
I: Configuring diff...
I: Configuring libselinux1...
I: Configuring libstdc++6...
I: Configuring libdevmapper1.02...
I: Configuring libtext-charwidth-perl...
I: Configuring libtext-wrapi18n-perl...
I: Configuring coreutils...
I: Configuring debianutils...
I: Configuring makedev...
I: Configuring ncurses-base...
I: Configuring ncurses-bin...
I: Configuring libpam-modules...
I: Configuring base-files...
I: Configuring libblkid1...
I: Configuring e2fsprogs...
I: Configuring gzip...
I: Configuring dpkg...
I: Configuring dselect...
I: Configuring sysvinit-utils...
I: Configuring bash...
I: Configuring login...
I: Configuring lsb-base...
I: Configuring procps...
I: Configuring mount...
I: Configuring passwd...
I: Configuring initscripts...
I: Configuring util-linux...
I: Configuring sysvinit...
I: Configuring debconf-i18n...
I: Configuring debconf...
I: Unpacking the base system...
I: Unpacking adduser...
I: Unpacking apt...
I: Unpacking apt-utils...
I: Unpacking aptitude...
I: Unpacking bsdmainutils...
I: Unpacking cpio...
I: Unpacking cron...
I: Unpacking debian-archive-keyring...
I: Unpacking dhcp3-client...
I: Unpacking dhcp3-common...
I: Unpacking dmidecode...
I: Unpacking ed...
I: Unpacking gnupg...
I: Unpacking gpgv...
I: Unpacking groff-base...
I: Unpacking ifupdown...
I: Unpacking info...
I: Unpacking iptables...
I: Unpacking iputils-ping...
I: Unpacking klogd...
I: Unpacking laptop-detect...
I: Unpacking libbz2-1.0...
I: Unpacking libconsole...
I: Unpacking libdb4.2...
I: Unpacking libdb4.4...
I: Unpacking libgcrypt11...
I: Unpacking libgdbm3...
I: Unpacking libgnutls13...
I: Unpacking libgpg-error0...
I: Unpacking libldap2...
I: Unpacking liblzo1...
I: Unpacking libncursesw5...
I: Unpacking libnewt0.52...
I: Unpacking libopencdk8...
I: Unpacking libpopt0...
I: Unpacking libreadline5...
I: Unpacking libsasl2...
I: Unpacking libsasl2-2...
I: Unpacking libsigc++-2.0-0c2a...
I: Unpacking libssl0.9.8...
I: Unpacking libtasn1-3...
I: Unpacking libusb-0.1-4...
I: Unpacking libwrap0...
I: Unpacking logrotate...
I: Unpacking man-db...
I: Unpacking manpages...
I: Unpacking module-init-tools...
I: Unpacking nano...
I: Unpacking net-tools...
I: Unpacking netbase...
I: Unpacking netcat...
I: Unpacking openbsd-inetd...
I: Unpacking readline-common...
I: Unpacking sysklogd...
I: Unpacking tasksel...
I: Unpacking tasksel-data...
I: Unpacking tcpd...
I: Unpacking traceroute...
I: Unpacking update-inetd...
I: Unpacking vim-common...
I: Unpacking vim-tiny...
I: Unpacking wget...
I: Unpacking whiptail...
I: Configuring the base system...
I: Configuring gpgv...
I: Configuring module-init-tools...
I: Configuring libgdbm3...
I: Configuring libtasn1-3...
I: Configuring libpopt0...
I: Configuring libusb-0.1-4...
I: Configuring libgpg-error0...
I: Configuring update-inetd...
I: Configuring libssl0.9.8...
I: Configuring vim-common...
I: Configuring dmidecode...
I: Configuring adduser...
I: Configuring traceroute...
I: Configuring manpages...
I: Configuring ed...
I: Configuring liblzo1...
I: Configuring wget...
I: Configuring groff-base...
I: Configuring libnewt0.52...
I: Configuring libdb4.2...
I: Configuring libdb4.4...
I: Configuring net-tools...
I: Configuring libsasl2-2...
I: Configuring bsdmainutils...
I: Configuring libsigc++-2.0-0c2a...
I: Configuring libncursesw5...
I: Configuring info...
I: Configuring iputils-ping...
I: Configuring libbz2-1.0...
I: Configuring cron...
I: Configuring libsasl2...
I: Configuring nano...
I: Configuring dhcp3-common...
I: Configuring libconsole...
I: Configuring iptables...
I: Configuring cpio...
I: Configuring vim-tiny...
I: Configuring readline-common...
I: Configuring libwrap0...
I: Configuring netcat...
I: Configuring tcpd...
I: Configuring laptop-detect...
I: Configuring man-db...
I: Configuring libgcrypt11...
I: Configuring whiptail...
I: Configuring ifupdown...
I: Configuring dhcp3-client...
I: Configuring openbsd-inetd...
I: Configuring libreadline5...
I: Configuring logrotate...
I: Configuring libopencdk8...
I: Configuring libgnutls13...
I: Configuring libldap2...
I: Configuring netbase...
I: Configuring gnupg...
I: Configuring debian-archive-keyring...
I: Configuring apt...
I: Configuring aptitude...
I: Configuring apt-utils...
I: Configuring klogd...
I: Configuring tasksel-data...
I: Configuring sysklogd...
I: Configuring tasksel...
I: Base system installed successfully.
Copying files from new installation to host.
Copying files from /tmp/V7tU6Qa1eB/var/cache/apt/archives ->
/var/cache/apt/archives
Done
Done
Done
Running hooks
Running hook 15-disable-hwclock
chmod: ne peut accéder `/tmp/V7tU6Qa1eB/etc/init.d/hwclockfirst.sh': Aucun
fichier ou répertoire de ce type
hook 15-disable-hwclock: done.
Running hook 20-setup-apt
Get:1 http://ftp.lip6.fr etch Release.gpg [378B]
Hit http://ftp.lip6.fr etch Release
Ign http://ftp.lip6.fr etch/main Packages/DiffIndex
Get:2 http://ftp.lip6.fr etch/contrib Packages [72.2kB]
Get:3 http://security.debian.org stable/updates Release.gpg [189B]
Get:4 http://security.debian.org stable/updates Release [22.5kB]
Get:5 http://security.debian.org stable/updates/main Packages [259kB]
Get:6 http://ftp.lip6.fr etch/non-free Packages [102kB]
Get:7 http://security.debian.org stable/updates/contrib Packages [20B]
Get:8 http://security.debian.org stable/updates/non-free Packages [20B]
Get:9 http://security.debian.org stable/updates/main Sources [33.7kB]
Get:10 http://security.debian.org stable/updates/contrib Sources [20B]
Get:11 http://security.debian.org stable/updates/non-free Sources [20B]
Get:12 http://ftp.lip6.fr etch/main Sources [1653kB]
Get:13 http://ftp.lip6.fr etch/contrib Sources [21.1kB]
Get:14 http://ftp.lip6.fr etch/non-free Sources [33.1kB]
Hit http://ftp.lip6.fr etch/main Packages
Fetched 2197kB in 52s (42.1kB/s)
Reading package lists...
hook 20-setup-apt: done.
Running hook 25-disable-tls
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
libc6-xen
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 1122kB of archives.
After unpacking 2470kB of additional disk space will be used.
Get:1 http://ftp.lip6.fr etch/main libc6-xen 2.3.6.ds1-13etch4 [1122kB]
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Fetched 1122kB in 17s (65.5kB/s)
Selecting previously deselected package libc6-xen.
(Reading database ... 7180 files and directories currently installed.)
Unpacking libc6-xen (from .../libc6-xen_2.3.6.ds1-13etch4_i386.deb) ...
Setting up libc6-xen (2.3.6.ds1-13etch4) ...
hook 25-disable-tls: done.
Running hook 30-fix-inittab
hook 30-fix-inittab: done.
Running hook 35-setup-users
hook 35-setup-users: done.
Running hook 40-setup-networking
hook 40-setup-networking: done.
Running hook 50-setup-hostname
hook 50-setup-hostname: done.
Running hook 55-create-dev
hook 55-create-dev: done.
Running hook 60-copy-host-files
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
sudo
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 162kB of archives.
After unpacking 406kB of additional disk space will be used.
Get:1 http://ftp.lip6.fr etch/main sudo 1.6.8p12-4 [162kB]
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Fetched 162kB in 6s (23.6kB/s)
Selecting previously deselected package sudo.
(Reading database ... 7229 files and directories currently installed.)
Unpacking sudo (from .../sudo_1.6.8p12-4_i386.deb) ...
Setting up sudo (1.6.8p12-4) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
hook 60-copy-host-files: done.
Running hook 65-copy-user-files
hook 65-copy-user-files: done.
Running hook 70-install-ssh
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
libedit2 libkrb53 openssh-client openssh-server
Suggested packages:
krb5-doc krb5-user ssh-askpass xbase-clients rssh molly-guard
The following NEW packages will be installed:
libedit2 libkrb53 openssh-client openssh-server ssh
0 upgraded, 5 newly installed, 0 to remove and 4 not upgraded.
Need to get 893kB/1302kB of archives.
After unpacking 3334kB of additional disk space will be used.
Get:1 http://ftp.lip6.fr etch/main libedit2 2.9.cvs.20050518-2.2 [55.4kB]
Get:2 http://ftp.lip6.fr etch/main openssh-client 1:4.3p2-9 [616kB]
Get:3 http://ftp.lip6.fr etch/main openssh-server 1:4.3p2-9 [222kB]
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
Fetched 893kB in 16s (52.6kB/s)
Selecting previously deselected package libkrb53.
(Reading database ... 7258 files and directories currently installed.)
Unpacking libkrb53 (from .../libkrb53_1.4.4-7etch4_i386.deb) ...
Selecting previously deselected package libedit2.
Unpacking libedit2 (from .../libedit2_2.9.cvs.20050518-2.2_i386.deb) ...
Selecting previously deselected package openssh-client.
Unpacking openssh-client (from .../openssh-client_1%3a4.3p2-9_i386.deb) ...
Selecting previously deselected package openssh-server.
Unpacking openssh-server (from .../openssh-server_1%3a4.3p2-9_i386.deb) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously deselected package ssh.
Unpacking ssh (from .../ssh_1%3a4.3p2-9_all.deb) ...
Setting up libkrb53 (1.4.4-7etch4) ...
Setting up libedit2 (2.9.cvs.20050518-2.2) ...
Setting up openssh-client (4.3p2-9) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openssh-server (4.3p2-9) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Creating SSH2 RSA key; this may take some time ...
Creating SSH2 DSA key; this may take some time ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "fr_FR@euro"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Restarting OpenBSD Secure Shell server: sshd.
Setting up ssh (4.3p2-9) ...
Stopping OpenBSD Secure Shell server: sshd.
hook 70-install-ssh: done.
Running hook 80-install-modules
Reading package lists...
Building dependency tree...
module-init-tools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
hook 80-install-modules: done.
Running hook 90-make-fstab
hook 90-make-fstab: done.
Running hook 99-clean-image
hook 99-clean-image: done.
Done
No role script specified. Skipping
Creating Xen configuration file
Done
Setting up root password
All done
[2008-01-08 21:09:30 4709] INFO (__init__:1072) Xend Daemon started
[2008-01-08 21:09:30 4709] INFO (__init__:1072) Xend changeset: Fri May 18
16:59:32 2007 +0100 15042:c0b0974fb055.
[2008-01-08 21:09:30 4709] INFO (__init__:1072) Xend version: Unknown.
[2008-01-08 21:09:32 4709] DEBUG (__init__:1072)
XendDomainInfo.recreate({'max_vcpu_id': 1, 'cpu_time': 50898821722L, 'ssidref':
0, 'hvm': 0, 'shutdown_reason': 0, 'dying': 0, 'online_vcpus': 2, 'domid': 0,
'paused': 0, 'crashed': 0, 'running': 1, 'maxmem_kb': 4294967292L, 'shutdown':
0, 'mem_kb': 1939624L, 'handle': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0], 'blocked': 0, 'name': 'Domain-0'})
[2008-01-08 21:09:32 4709] INFO (__init__:1072) Recreating domain 0, UUID
00000000-0000-0000-0000-000000000000. at /local/domain/0
[2008-01-08 21:09:32 4717] DEBUG (__init__:1072) Storing domain details:
{'name': 'Domain-0', 'console/limit': '1048576', 'memory/target': '1939624',
'vm': '/vm/00000000-0000-0000-0000-000000000000', 'domid': '0',
'cpu/0/availability': 'online', 'cpu/1/availability': 'online',
'control/platform-feature-multiprocessor-suspend': '1'}
[2008-01-08 21:09:32 4709] DEBUG (__init__:1072) Adding Domain: 0
[2008-01-08 21:09:32 4717] DEBUG (__init__:1072)
XendDomainInfo.handleShutdownWatch
[2008-01-08 21:09:32 4709] DEBUG (__init__:1072) number of vcpus to use is 0
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VBD.set_device not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VBD.set_mode not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VBD.set_type not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call:
VM.get_auto_power_on not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call:
VM.set_auto_power_on not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VM.set_VCPUs_max
not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call:
VM.set_VCPUs_at_startup not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: debug.get_all not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call:
console.get_other_config not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call:
console.set_other_config not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VIF.get_network
not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VIF.set_device not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VIF.set_MAC not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: VIF.set_MTU not
found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call:
session.get_all_records not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: event.get_record
not found
[2008-01-08 21:09:32 4709] WARNING (__init__:1072) API call: event.get_all not
found
[2008-01-08 21:09:32 4731] INFO (__init__:1072) Opening Unix domain socket
XML-RPC server on /var/run/xend/xen-api.sock; authentication has been disabled
for this server.
[2008-01-08 21:09:32 4732] INFO (__init__:1072) Opening Unix domain socket
XML-RPC server on /var/run/xend/xmlrpc.sock.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) XendDomainInfo.create(['vm',
['name', 'xen1.example.com'], ['memory', '32'], ['on_poweroff', 'destroy'],
['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1],
['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['image', ['linux',
['kernel', '/boot/vmlinuz-2.6.18-xen'], ['ramdisk',
'/boot/initrd.img-2.6.18-xen'], ['root', '/dev/hda1 ro']]], ['device', ['vbd',
['uname', 'file:/home/xen//domains/xen1.example.com/disk.img'], ['dev',
'hda1'], ['mode', 'w']]], ['device', ['vbd', ['uname',
'file:/home/xen//domains/xen1.example.com/swap.img'], ['dev', 'hda2'], ['mode',
'w']]], ['device', ['vif', ['ip', '192.168.1.125']]]])
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) XendDomainInfo.constructDomain
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) Balloon: 129308 KiB free;
need 2048; done.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) Adding Domain: 1
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) XendDomainInfo.initDomain: 1
256
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072)
_initDomain:shadow_memory=0x0, memory_static_max=0x2000000,
memory_static_min=0x0.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) Balloon: 129308 KiB free;
need 32768; done.
[2008-01-08 21:18:28 30266] INFO (__init__:1072) buildDomain os=linux dom=1
vcpus=1
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) domid = 1
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) memsize = 32
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) image =
/boot/vmlinuz-2.6.18-xen
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) store_evtchn = 1
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) console_evtchn = 2
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) cmdline =
root=/dev/hda1 ro
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) ramdisk =
/boot/initrd.img-2.6.18-xen
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) vcpus = 1
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) features =
[2008-01-08 21:18:28 30266] INFO (__init__:1072) createDevice: vbd : {'uuid':
'ddf3d64b-6abe-4fcf-4e9e-a910e61267b2', 'bootable': 1, 'driver':
'paravirtualised', 'dev': 'hda1', 'uname':
'file:/home/xen//domains/xen1.example.com/disk.img', 'mode': 'w'}
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) DevController: writing
{'backend-id': '0', 'virtual-device': '769', 'device-type': 'disk', 'state':
'1', 'backend': '/local/domain/0/backend/vbd/1/769'} to
/local/domain/1/device/vbd/769.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) DevController: writing
{'domain': 'xen1.example.com', 'frontend': '/local/domain/1/device/vbd/769',
'uuid': 'ddf3d64b-6abe-4fcf-4e9e-a910e61267b2', 'dev': 'hda1', 'state': '1',
'params': '/home/xen//domains/xen1.example.com/disk.img', 'mode': 'w',
'online': '1', 'frontend-id': '1', 'type': 'file'} to
/local/domain/0/backend/vbd/1/769.
[2008-01-08 21:18:28 30266] INFO (__init__:1072) createDevice: vbd : {'uuid':
'ea7ae2ce-9d1b-77d6-25c3-6c04647510d9', 'bootable': 0, 'driver':
'paravirtualised', 'dev': 'hda2', 'uname':
'file:/home/xen//domains/xen1.example.com/swap.img', 'mode': 'w'}
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) DevController: writing
{'backend-id': '0', 'virtual-device': '770', 'device-type': 'disk', 'state':
'1', 'backend': '/local/domain/0/backend/vbd/1/770'} to
/local/domain/1/device/vbd/770.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) DevController: writing
{'domain': 'xen1.example.com', 'frontend': '/local/domain/1/device/vbd/770',
'uuid': 'ea7ae2ce-9d1b-77d6-25c3-6c04647510d9', 'dev': 'hda2', 'state': '1',
'params': '/home/xen//domains/xen1.example.com/swap.img', 'mode': 'w',
'online': '1', 'frontend-id': '1', 'type': 'file'} to
/local/domain/0/backend/vbd/1/770.
[2008-01-08 21:18:28 30266] INFO (__init__:1072) createDevice: vif : {'ip':
'192.168.1.125', 'uuid': 'af72884f-a07d-3ecf-ca98-f5a6e5feaef1'}
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) DevController: writing
{'backend-id': '0', 'mac': '00:16:3e:0c:4c:c3', 'handle': '0', 'state': '1',
'backend': '/local/domain/0/backend/vif/1/0'} to /local/domain/1/device/vif/0.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) DevController: writing
{'domain': 'xen1.example.com', 'handle': '0', 'uuid':
'af72884f-a07d-3ecf-ca98-f5a6e5feaef1', 'script':
'/etc/xen/scripts/vif-bridge', 'ip': '192.168.1.125', 'state': '1', 'frontend':
'/local/domain/1/device/vif/0', 'mac': '00:16:3e:0c:4c:c3', 'online': '1',
'frontend-id': '1', 'type': 'netfront'} to /local/domain/0/backend/vif/1/0.
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) Storing VM details:
{'on_xend_stop': 'ignore', 'shadow_memory': '0', 'uuid':
'c90088f1-f112-ba53-1953-78036e863833', 'on_reboot': 'restart', 'start_time':
'1199823508.55', 'on_poweroff': 'destroy', 'on_xend_start': 'ignore',
'on_crash': 'restart', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail':
'1', 'image': "(linux (kernel /boot/vmlinuz-2.6.18-xen) (ramdisk
/boot/initrd.img-2.6.18-xen) (args 'root=/dev/hda1 ro ') (notes (HV_START_LOW
4118806528) (FEATURES
'writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel')
(VIRT_BASE 3221225472) (GUEST_VERSION 2.6) (PADDR_OFFSET 3221225472) (GUEST_OS
linux) (HYPERCALL_PAGE 3222278144) (LOADER generic) (SUSPEND_CANCEL 1)
(PAE_MODE yes) (ENTRY 3222274048) (XEN_VERSION xen-3.0)))", 'name':
'xen1.example.com'}
[2008-01-08 21:18:28 30266] DEBUG (__init__:1072) Storing domain details:
{'console/ring-ref': '34126', 'image/entry': '3222274048', 'console/port': '2',
'store/ring-ref': '34127', 'image/loader': 'generic', 'vm':
'/vm/c90088f1-f112-ba53-1953-78036e863833',
'control/platform-feature-multiprocessor-suspend': '1', 'image/hv-start-low':
'4118806528', 'image/guest-os': 'linux',
'image/features/writable-descriptor-tables': '1', 'image/virt-base':
'3221225472', 'memory/target': '32768', 'image/guest-version': '2.6',
'image/features/supervisor-mode-kernel': '1', 'image/pae-mode': 'yes',
'console/limit': '1048576', 'image/paddr-offset': '3221225472',
'image/hypercall-page': '3222278144', 'image/suspend-cancel': '1',
'cpu/0/availability': 'online', 'image/features/pae-pgdir-above-4gb': '1',
'image/features/writable-page-tables': '1',
'image/features/auto-translated-physmap': '1', 'name': 'xen1.example.com',
'domid': '1', 'image/xen-version': 'xen-3.0', 'store/port': '1'}
[2008-01-08 21:18:28 4717] DEBUG (__init__:1072) DevController: writing
{'state': '1', 'backend-id': '0', 'backend':
'/local/domain/0/backend/console/1/0'} to /local/domain/1/device/console/0.
[2008-01-08 21:18:28 4717] DEBUG (__init__:1072) DevController: writing
{'domain': 'xen1.example.com', 'protocol': 'vt100', 'uuid':
'6e78573c-b5bb-d2d4-34ea-73c93a7fc4a4', 'frontend':
'/local/domain/1/device/console/0', 'state': '1', 'location': '2', 'online':
'1', 'frontend-id': '1'} to /local/domain/0/backend/console/1/0.
[2008-01-08 21:18:28 4717] DEBUG (__init__:1072) Storing domain details:
{'console/ring-ref': '34126', 'image/entry': '3222274048', 'console/port': '2',
'store/ring-ref': '34127', 'image/loader': 'generic', 'vm':
'/vm/c90088f1-f112-ba53-1953-78036e863833',
'control/platform-feature-multiprocessor-suspend': '1', 'image/hv-start-low':
'4118806528', 'image/guest-os': 'linux',
'image/features/writable-descriptor-tables': '1', 'image/virt-base':
'3221225472', 'memory/target': '32768', 'image/guest-version': '2.6',
'image/features/supervisor-mode-kernel': '1', 'image/pae-mode': 'yes',
'console/limit': '1048576', 'image/paddr-offset': '3221225472',
'image/hypercall-page': '3222278144', 'image/suspend-cancel': '1',
'cpu/0/availability': 'online', 'image/features/pae-pgdir-above-4gb': '1',
'image/features/writable-page-tables': '1',
'image/features/auto-translated-physmap': '1', 'name': 'xen1.example.com',
'domid': '1', 'image/xen-version': 'xen-3.0', 'store/port': '1'}
[2008-01-08 21:18:28 4717] DEBUG (__init__:1072)
XendDomainInfo.handleShutdownWatch
[2008-01-08 21:18:28 30317] DEBUG (__init__:1072) Waiting for devices vif.
[2008-01-08 21:18:28 30317] DEBUG (__init__:1072) Waiting for 0.
[2008-01-08 21:18:28 4717] DEBUG (__init__:1072) hotplugStatusCallback
/local/domain/0/backend/vif/1/0/hotplug-status.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback
/local/domain/0/backend/vif/1/0/hotplug-status.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback 1.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices usb.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices vbd.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for 769.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback
/local/domain/0/backend/vbd/1/769/hotplug-status.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback
/local/domain/0/backend/vbd/1/769/hotplug-status.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback 1.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for 770.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback
/local/domain/0/backend/vbd/1/770/hotplug-status.
[2008-01-08 21:18:29 4717] DEBUG (__init__:1072) hotplugStatusCallback 1.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices irq.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices vkbd.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices vfb.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices console.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for 0.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices pci.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices ioports.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices tap.
[2008-01-08 21:18:29 30317] DEBUG (__init__:1072) Waiting for devices vtpm.
[2008-01-08 21:18:29 30496] INFO (__init__:1072) Domain xen1.example.com (1)
unpaused.
[2008-01-08 21:19:35 4717] WARNING (__init__:1072) Domain has crashed:
name=xen1.example.com id=1.
[2008-01-08 21:19:35 4717] DEBUG (__init__:1072) Storing domain details:
{'console/ring-ref': '34126', 'image/entry': '3222274048', 'console/port': '2',
'store/ring-ref': '34127', 'image/loader': 'generic', 'vm':
'/vm/c90088f1-f112-ba53-1953-78036e863833',
'control/platform-feature-multiprocessor-suspend': '1', 'image/hv-start-low':
'4118806528', 'image/guest-os': 'linux',
'image/features/writable-descriptor-tables': '1', 'image/virt-base':
'3221225472', 'memory/target': '32768', 'image/guest-version': '2.6',
'image/features/supervisor-mode-kernel': '1', 'image/pae-mode': 'yes',
'console/limit': '1048576', 'image/paddr-offset': '3221225472',
'image/hypercall-page': '3222278144', 'image/suspend-cancel': '1',
'cpu/0/availability': 'online', 'image/features/pae-pgdir-above-4gb': '1',
'image/features/writable-page-tables': '1',
'image/features/auto-translated-physmap': '1', 'name': 'xen1.example.com',
'domid': '1', 'image/xen-version': 'xen-3.0', 'store/port': '1'}
[2008-01-08 21:19:35 30529] DEBUG (__init__:1072)
XendDomainInfo.destroyDomain(1)
[2008-01-08 21:19:35 30529] DEBUG (__init__:1072)
XendDomainInfo.create_from_dict({'vcpus_params': {}, 'PV_args': 'root=/dev/hda1
ro ', 'features': '', 'cpus': [], 'paused': 0, 'domid': 1, 'shutdown': 0,
'VCPUs_live': 1, 'PV_bootloader': '', 'actions_after_crash': 'restart',
'vbd_refs': ['ddf3d64b-6abe-4fcf-4e9e-a910e61267b2',
'ea7ae2ce-9d1b-77d6-25c3-6c04647510d9'], 'PV_ramdisk':
'/boot/initrd.img-2.6.18-xen', 'is_control_domain': False, 'name_label':
'xen1.example.com', 'VCPUs_at_startup': 1, 'HVM_boot_params': {}, 'platform':
{'rtc_timeoffset': '0'}, 'cpu_weight': 256, 'console_refs':
['6e78573c-b5bb-d2d4-34ea-73c93a7fc4a4'], 'online_vcpus': 1, 'cpu_cap': 0,
'blocked': 0, 'on_xend_stop': 'ignore', 'memory_static_min': 0,
'HVM_boot_policy': '', 'shutdown_reason': 3, 'VCPUs_max': 1, 'start_time':
1199823508.5504999, 'memory_static_max': 33554432, 'actions_after_shutdown':
'destroy', 'on_xend_start': 'ignore', 'crashed': 1, 'memory_dynamic_max':
33554432, 'actions_after_suspend': '', 'is_a_template': False,
'PV_bootloader_args': '', 'memory_dynamic_min': 33554432, 'uuid':
'c90088f1-f112-ba53-1953-78036e863833', 'PV_kernel':
'/boot/vmlinuz-2.6.18-xen', 'cpu_time': 0.343947118, 'shadow_memory': 0,
'dying': 1, 'vcpu_avail': 1, 'notes': {'HV_START_LOW': '4118806528',
'FEATURES':
'writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel',
'VIRT_BASE': '3221225472', 'GUEST_VERSION': '2.6', 'PADDR_OFFSET':
'3221225472', 'GUEST_OS': 'linux', 'HYPERCALL_PAGE': '3222278144', 'LOADER':
'generic', 'SUSPEND_CANCEL': '1', 'PAE_MODE': 'yes', 'ENTRY': '3222274048',
'XEN_VERSION': 'xen-3.0'}, 'other_config': {}, 'running': 0,
'actions_after_reboot': 'restart', 'vif_refs':
['af72884f-a07d-3ecf-ca98-f5a6e5feaef1'], 'vtpm_refs': [], 'security': None,
'devices': {'ea7ae2ce-9d1b-77d6-25c3-6c04647510d9': ('vbd', {'uuid':
'ea7ae2ce-9d1b-77d6-25c3-6c04647510d9', 'bootable': 0, 'devid': 770, 'driver':
'paravirtualised', 'dev': 'hda2', 'uname':
'file:/home/xen//domains/xen1.example.com/swap.img', 'mode': 'w'}),
'6e78573c-b5bb-d2d4-34ea-73c93a7fc4a4': ('console', {'other_config': {},
'protocol': 'vt100', 'uuid': '6e78573c-b5bb-d2d4-34ea-73c93a7fc4a4',
'location': '2'}), 'af72884f-a07d-3ecf-ca98-f5a6e5feaef1': ('vif', {'ip':
'192.168.1.125', 'devid': 0, 'uuid': 'af72884f-a07d-3ecf-ca98-f5a6e5feaef1'}),
'ddf3d64b-6abe-4fcf-4e9e-a910e61267b2': ('vbd', {'uuid':
'ddf3d64b-6abe-4fcf-4e9e-a910e61267b2', 'bootable': 1, 'devid': 769, 'driver':
'paravirtualised', 'dev': 'hda1', 'uname':
'file:/home/xen//domains/xen1.example.com/disk.img', 'mode': 'w'})}})
[2008-01-08 21:19:35 30529] ERROR (__init__:1072) Domain construction failed
Traceback (most recent call last):
File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 103, in
create_from_dict
vm.start()
File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 420, in start
raise XendError('VM already running')
XendError: VM already running
[2008-01-08 21:19:35 30529] DEBUG (__init__:1072) XendDomainInfo.destroy:
domid=1
[2008-01-08 21:19:35 30529] ERROR (__init__:1072) Failed to restart domain 1.
Traceback (most recent call last):
File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 1216, in _restart
new_dom = XendDomain.instance().domain_create_from_dict(
File "/usr/lib/python/xen/xend/XendDomain.py", line 932, in
domain_create_from_dict
dominfo = XendDomainInfo.create_from_dict(config_dict)
File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 103, in
create_from_dict
vm.start()
File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 420, in start
raise XendError('VM already running')
XendError: VM already running
Xend started at Tue Jan 8 21:09:30 2008.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home