# -*- mode: python; -*- #============================================================================ # Python configuration setup for 'xm create'. # This script sets the parameters used when a domain is created using 'xm create'. # You use a separate script for each domain you want to create, or # you can set the parameters for the domain on the xm command line. #============================================================================ import os, re arch = os.uname()[4] if re.search('64', arch): arch_libdir = 'lib64' else: arch_libdir = 'lib' #---------------------------------------------------------------------------- # Kernel image file. kernel = "/usr/lib/xen/boot/hvmloader" # The domain build function. HVM domain uses 'hvm'. builder='hvm' # Initial memory allocation (in megabytes) for the new domain. # # WARNING: Creating a domain with insufficient memory may cause out of # memory errors. The domain needs enough memory to boot kernel # and modules. Allocating less than 32MBs is not recommended. memory = 1024 # Shadow pagetable memory for the domain, in MB. # Should be at least 2KB per MB of domain memory, plus a few MB per vcpu. # shadow_memory = 8 # A name for your domain. All domains must have different names. name = "C20-VT" # 128-bit UUID for the domain. The default behavior is to generate a new UUID # on each call to 'xm create'. #uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9" #----------------------------------------------------------------------------- # The number of cpus guest platform has, default=1 vcpus=1 # Enable/disable HVM guest PAE, default=1 (enabled) #pae=1 # Enable/disable HVM guest ACPI, default=1 (enabled) #acpi=1 # Enable/disable HVM APIC mode, default=1 (enabled) # Note that this option is ignored if vcpus > 1 #apic=1 # List of which CPUS this domain is allowed to use, default Xen picks #cpus = "" # leave to Xen to pick #cpus = "0" # all vcpus run on CPU0 #cpus = "0-3,5,^1" # run on cpus 0,2,3,5 # Optionally define mac and/or bridge for the network interfaces. # Random MACs are assigned if not given. #vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ] # type=ioemu specify the NIC is an ioemu device not netfront #vif = [ 'type=ioemu, bridge=xenbr0' ] vif = [ 'type=ioemu, mac=00:AA:BB:BB:AA:69' ] #---------------------------------------------------------------------------- # Define the disk devices you want the domain to have access to, and # what you want them accessible as. # Each disk entry is of the form phy:UNAME,DEV,MODE # where UNAME is the device, DEV is the device name the domain will see, # and MODE is r for read-only, w for read-write. #disk = [ 'phy:sda1,sda1,r' ] #disk = [ 'file:/var/images/min-el3-i386.img,sda,w', ',hdc:cdrom,r' ] disk = [ 'phy:/dev/sda,ioemu:sda,w' ] #---------------------------------------------------------------------------- # Configure the behaviour when a domain exits. There are three 'reasons' # for a domain to stop: poweroff, reboot, and crash. For each of these you # may specify: # # "destroy", meaning that the domain is cleaned up as normal; # "restart", meaning that a new domain is started in place of the old # one; # "preserve", meaning that no clean-up is done until the domain is # manually destroyed (using xm destroy, for example); or # "rename-restart", meaning that the old domain is not cleaned up, but is # renamed and a new domain started in its place. # # The default is # # on_poweroff = 'destroy' # on_reboot = 'restart' # on_crash = 'restart' # # For backwards compatibility we also support the deprecated option restart # # restart = 'onreboot' means on_poweroff = 'destroy' # on_reboot = 'restart' # on_crash = 'destroy' # # restart = 'always' means on_poweroff = 'restart' # on_reboot = 'restart' # on_crash = 'restart' # # restart = 'never' means on_poweroff = 'destroy' # on_reboot = 'destroy' # on_crash = 'destroy' #on_poweroff = 'destroy' #on_reboot = 'restart' #on_crash = 'restart' on_crash = 'destroy' #============================================================================ # New stuff #device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm' device_model = "/usr/lib/xen/bin/qemu-dm" #----------------------------------------------------------------------------- # boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d) # default: hard disk, cd-rom, floppy #boot="cda" boot = "c" #----------------------------------------------------------------------------- # write to temporary files instead of disk image files #snapshot=1 #---------------------------------------------------------------------------- # enable SDL library for graphics, default = 0 sdl=1 #---------------------------------------------------------------------------- # enable VNC library for graphics, default = 1 vnc=0 #---------------------------------------------------------------------------- # address that should be listened on for the VNC server if vnc is set. # default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp #vnclisten="127.0.0.1" #---------------------------------------------------------------------------- # set VNC display number, default = domid #vncdisplay=1 #---------------------------------------------------------------------------- # try to find an unused port for the VNC server, default = 1 #vncunused=1 #---------------------------------------------------------------------------- # enable spawning vncviewer for domain's console # (only valid when vnc=1), default = 0 #vncconsole=1 #---------------------------------------------------------------------------- # set password for domain's VNC console # default is depents on vncpasswd in xend-config.sxp vncpasswd='' #---------------------------------------------------------------------------- # no graphics, use serial port #nographic=0 #---------------------------------------------------------------------------- # enable stdvga, default = 0 (use cirrus logic device model) stdvga=0 #----------------------------------------------------------------------------- # serial port re-direct to pty deivce, /dev/pts/n # then xm console or minicom can connect #serial='pty' #serial='/dev/ttyS0' #serial='stdio' serial='file:/tmp/x.log' #serial='/dev/pts/4' #----------------------------------------------------------------------------- # Qemu Monitor, default is disable # Use ctrl-alt-2 to connect #monitor=1 #----------------------------------------------------------------------------- # enable sound card support, [sb16|es1370|all|..,..], default none #soundhw='sb16' #----------------------------------------------------------------------------- # set the real time clock to local time [default=0 i.e. set to utc] #localtime=1 #----------------------------------------------------------------------------- # set the real time clock offset in seconds [default=0 i.e. same as dom0] #rtc_timeoffset=3600 #----------------------------------------------------------------------------- # start in full screen #full-screen=1 #----------------------------------------------------------------------------- # Enable USB support (specific devices specified at runtime through the # monitor window) #usb=1 # Enable USB mouse support (only enable one of the following, `mouse' for # PS/2 protocol relative mouse, `tablet' for # absolute mouse) #usbdevice='mouse' #usbdevice='tablet' #----------------------------------------------------------------------------- # Set keyboard layout, default is en-us keyboard. #keymap='ja'