| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Network routing setup problem; domU won't start
Artur Linhart asked:
> Did you specify also the given IP 172.31.53.254 in your DomU?
Yes. Here's the /etc/network/interfaces file on my domU:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 172.31.53.254
gateway 172.31.53.1
netmask 255.255.255.0
# post-up ethtool -K eth0 tx off
#
# The commented out line above will disable TCP checksumming which
# might resolve problems for some users. It is disabled by default
#
> If the DomU is not accessible from Dom0, I suppose it is also in
> the opposite way - Dom0 is not accessible from Dom0? Are there
> also any error messages in the Dom0 log files or any other error
> messages in DomU?
I don't see anything in the log files on my dom0 that appear to be
error messages about networking. And when I mount the domU's disk
to examine it (when the domU is down), there isn't ANYTHING AT ALL
written to any of the domU's /var/log files (except /var/log/wtmp)
since I originally created the domU's disk image a few days ago.
--
Rich Wales === Palo Alto, CA, USA === richw@xxxxxxxxx
http://www.richw.org === http://en.wikipedia.org/wiki/User:Richwales
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home