WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Re: No filesystem could mount root, tried: cramfs .....

Hi Igor et All,
Thanks. Please stay with me a bit; I'm new in this enviroment. After correctiong
the disk setup in g2.conf:
   disk = ['phy:/dev/cciss/c0d0p5,hda1,w']
   root = "/dev/hda1 ro"

which eliminated the error ("Error: int argument required" on Debian Etch?), the
processing continued until at this point/error:
"
Registering block device major 8
No filesystem could mount root, tried: cramfs
kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(8,1)
"

Could you give some light on this also?
There are many posts about this problem on the internet but I couldn't fine any
clear answer.
thank you for you attention



On Fri, 7 Dec 2007 10:28:46 +0200
Igor Chubin <igor@xxxxxxx> wrote:
> On Do, Dez 06, 2007 at 04:42:26 -0600, Peter Curran wrote:
> > Thanks Igor,
> > Below is the config file:
> > 
> > #
> > kernel = "/boot/vmlinuz-2.6.18-4-xen-686"
> > memory = 500
> > name = "g2"
> > hostname = "g2.gwhopper.com"
> > ip = "xx.xxx.xxx.x"
> > netmask = "255.255.255.240"
> > gateway = "xx.xxx.xxx.1"
> > disk = ['phy:/dev/cciss/c0d0p5,c0d0p5,w']
> > root = "/dev/cciss/c0d0p5 ro"
> > extra = "4"
> > 
> 
> 
> I think, that the disk parameter specified incorrectly.
> Try to write:
> 
> disk = ['phy:/dev/cciss/c0d0p5,hda1,w']
> root = "/dev/hda1 ro"
> 
> > 
> > 
> > 
> > Thank you.
> > 
> > 
> > 
> > 
> > 
> > On Thu, 6 Dec 2007 21:32:02 +0200
> > Igor Chubin <igor@xxxxxxx> wrote:
> > > On Do, Dez 06, 2007 at 11:56:54 -0600, Peter Curran wrote:
> > > > Hi,
> > > > I ran "xm create -c host2 vmid=2"   and got this error on a Debian Etch
> > > System:
> > > > 
> > > > "Error: int argument required"
> > > 
> > > Please, show the config file host2.
> > > 
> > > It's likely that there is a mistake in that file.
> > > 
> > > 
> > > > 
> > > > The vm didn't get created. Could someone help to solve this problem?
> > > > thank you
> > > > 
> > > > --------------------------------
> > > > This Email was brought to you by:
> > > > http://mybestonline.com
> > > > 
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > http://lists.xensource.com/xen-users
> > > 
> > > -- 
> > > WBR, i.m.chubin
> > > 
> > > 
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > 
> > --------------------------------
> > This Email was brought to you by:
> > http://mybestonline.com
> 
> -- 
> WBR, i.m.chubin
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

--------------------------------
This Email was brought to you by:
http://mybestonline.com

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users