> After having problems with SMP, disabled Hyperthreading and did a fresh
> install of Ubuntu7.10 / xen-3.10
>
> The only problem I have is that I can't boot any domU!
>
> On the screen I see:
> [ 2473.641941] md: raid5 personality registered for level 5
> [ 2473.642062] md: raid4 personality registered for level 4
> [ 2473.666833] md: raid10 personality registered for level 10
> [ 2473.908267] kjournald starting. Commit interval 5 seconds
> [ 2473.908561] EXT3-fs: mounted filesystem with ordered data mode.
> .... and then it freezes
Sounds like it's running OK but not sending output to the console.
> xm list gives:
> Name ID Mem VCPUs State Time(s)
> Domain-0 0 938 1 r----- 20.5
> xen1.example.com 1 64 1 ------ 191.4
That's fine; on an uniprocessor machine you'll never see a guest in the
running state because in order for you to run "xm list" dom0 must be running.
If you try adding
extra = "xencons=tty console=tty"
to the domain config file, does that help?
Cheers,
Mark
>
>
> in xend.log I see:
> [2007-12-04 15:29:48 4488] DEBUG (__init__:1094) Storing domain details:
> {'console/ring-ref': '14835', 'image/entry': '32222
> 74048', 'console/port': '2', 'store/ring-ref': '14836', 'image/loader':
> 'generic', 'vm': '/vm/7eff4749-5541-aa5d-9522-8127ca
> fb09a4', 'control/platform-feature-multiprocessor-suspend': '1',
> 'image/hv-start-low': '4118806528', 'image/guest-os': 'linu
> x', 'image/features/writable-descriptor-tables': '1', 'image/virt-base':
> '3221225472', 'memory/target': '65536', 'image/gues
> t-version': '2.6', 'image/features/supervisor-mode-kernel': '1',
> 'image/pae-mode': 'yes', 'console/limit': '1048576', 'image
> /paddr-offset': '3221225472', 'image/hypercall-page': '3222278144',
> 'image/suspend-cancel': '1', 'cpu/0/availability': 'onli
> ne', 'image/features/pae-pgdir-above-4gb': '1',
> 'image/features/writable-page-tables': '1',
> 'image/features/auto-translated- physmap': '1', 'name': 'xen1.example.com',
> 'domid': '1',
> 'image/xen-version': 'xen-3.0', 'store/port': '1'}
> [2007-12-04 15:29:48 4488] DEBUG (__init__:1094)
> XendDomainInfo.handleShutdownWatch
> [2007-12-04 15:29:48 4488] DEBUG (__init__:1094) Waiting for devices vif.
> [2007-12-04 15:29:48 4488] DEBUG (__init__:1094) Waiting for 0.
> [2007-12-04 15:29:48 4488] DEBUG (__init__:1094) hotplugStatusCallback
> /local/domain/0/backend/vif/1/0/hotplug-status.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) hotplugStatusCallback
> /local/domain/0/backend/vif/1/0/hotplug-status.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) hotplugStatusCallback 1.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices usb.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices vbd.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for 769.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) hotplugStatusCallback
> /local/domain/0/backend/vbd/1/769/hotplug-status.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) hotplugStatusCallback 1.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for 770.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) hotplugStatusCallback
> /local/domain/0/backend/vbd/1/770/hotplug-status.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) hotplugStatusCallback 1.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices irq.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices vkbd.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices vfb.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices
> console.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for 0.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices pci.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices
> ioports.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices tap.
> [2007-12-04 15:29:49 4488] DEBUG (__init__:1094) Waiting for devices vtpm.
> [2007-12-04 15:29:49 4488] INFO (__init__:1094) Domain xen1.example.com
> (1) unpaused.
>
>
>
> #xen1.example.com.cfg
> kernel = '/boot/vmlinuz-2.6.22-14-xen'
> ramdisk = '/boot/initrd.img-2.6.22-14-xen'
> memory = '64'
> vcpus = '1'
> root = '/dev/hda1 ro'
> disk = [
> 'file:/home/xen/domains/xen1.example.com/disk.img,hda1,w',
> 'file:/home/xen/domains/xen1.example.com/swap.img,hda2,w' ]
> name = 'xen1.example.com'
> vif = [ 'ip=192.168.2.101' ]
>
>
> Tried nosmp noapic acpi=off with the root= in the DomU config-file, but
> always the same.
>
> Any suggestions?
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
Dave: Just a question. What use is a unicyle with no seat? And no pedals!
Mark: To answer a question with a question: What use is a skateboard?
Dave: Skateboards have wheels.
Mark: My wheel has a wheel!
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home