Thankyou very much for your detailed instructions.
I'm stuck with this error
Error: No Groups on which to run command
I have edited
diff comps.py.orig comps.py
124c124
< if type not in ('mandatory', 'default', 'optional'):
---
> if type not in ('mandatory', 'default', 'optional',
> 'conditional'):
143c143
< if type not in ('mandatory', 'default', 'optional'):
---
> if type not in ('mandatory', 'default', 'optional',
> 'conditional'):
And my xen-yum.conf lokk like this.
[main]
cachedir=/var/cache/yum
debuglevel=2
logfile=/var/log/yum.log
exclude=*-debuginfo
gpgcheck=0
obsoletes=1
reposdir=/dev/null
[base]
name=CentOS-4.5 - Plus
baseurl=http://mirror.centos.org/centos/4.5/centosplus/i386/ enabled=1
Where do you think I'm going wrong?
Thanks.
Chris.
On Dec 1, 2007 8:58 PM, Igor Chubin <igor@xxxxxxx> wrote:
> On Fr, Nov 30, 2007 at 06:46:52 +0100, Chris Fanning wrote:
> > Hi,
> >
> > I'd like to know how to install centos (4.5 in my case) to run as a
> > domU on a dom0 running etch.
> >
> > Any tips please?
>
> Make sure that you have enough free space
> on the file system where you are going to make image for centos
> (or create PV if you are going to use LVM).
>
> # df -h
> # dd if=/dev/zero of=centos.img count=1 bs=1k seek=$[2*1024*1024]
> # mkfs.ext3 centos.img
> # mount -o loop centos.img /mnt
>
>
> Now you have 2G-size image with ext3 filesystem mounted to /mnt directory.
>
> After that:
>
> # apt-get install yum
> # yum -c /tmp/yum-xen.conf --installroot=/mnt -y groupinstall Base
>
>
> where you-xen.conf file should look like:
>
> ===================================================
> [main]
> cachedir=/var/cache/yum
> debuglevel=2
> logfile=/var/log/yum.log
> exclude=*-debuginfo
> gpgcheck=0
> obsoletes=1
> reposdir=/dev/null
>
> [base]
> name=CentOS-$releasever - Plus
> baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
> enabled=1
> ===================================================
>
>
>
> if you have the error during installation
> ------------------------------------------------
> Failed to add groups file for repository: base
> Error: No Groups on which to run command
> ------------------------------------------------
>
> then modify yum code like shown below:
>
> ------------------------------------------------
> # cp /usr/share/python-support/yum/yum/comps.py{,.ORIG}
> # vi /usr/share/python-support/yum/yum/comps.py
> # diff /usr/share/python-support/yum/yum/comps.py{.ORIG,}
> 124c124
> < if type not in ('mandatory', 'default',
> 'optional'):
> ---
> > if type not in ('mandatory', 'default',
> > 'optional', 'conditional'):
> 143c143
> < if type not in ('mandatory', 'default',
> 'optional'):
> ---
> > if type not in ('mandatory', 'default',
> > 'optional', 'conditional'):
> ------------------------------------------------
>
>
>
> Create several directories and device files:
>
> %# /mnt/{dev,proc,etc}
> %# for i in console null zero ; do /sbin/MAKEDEV -d /mnt/dev -x $i ;
> %done
>
> Disable TLS.
>
> %# mv /mnt/lib/tls /mnt/lib/tls-disabled
>
> Create /etc/fstab
> (of course you must specify correct device files)
>
> %# cat <<EOL > /mnt/etc/fstab
> /dev/sda1 / ext3 defaults 1 1
> none /dev/pts devpts
> gid=5,mode=620 0 0
> none /dev/shm tmpfs defaults 0 0
> none /proc proc defaults 0 0
> none /sys sysfs defaults 0 0
> #/dev/sda2 /mnt ext3 defaults 1 2
> #/dev/sda3 swap swap defaults 0 0
> EOL
>
>
>
> Setup network interfaces
> (I suppose that you use one interface which should acquire
> its IP-address via DHCP).
>
>
> %# cat <<EOL > /mnt/etc/sysconfig/network
> NETWORKING=yes
> HOSTNAME=localhost.localdomain
> EOL
>
> cat <<EOL > /mnt/etc/sysconfig/network-scripts/ifcfg-eth0
> ONBOOT=yes
> DEVICE=eth0
> BOOTPROTO=dhcp
> EOL
>
>
>
>
> Copy kernel modules to the domU filesystem
> (alternatively you can install Xenified Linux Kernel
> inside domU using yum).
>
> %# cp -R /lib/modules/2.6.*xen* /mnt/lib/modules/
>
>
> Set root password for domU:
>
>
> %$ sudo chroot /mnt
> bash-3.1# pwconv
> bash-3.1# passwd
> Changing password for user root.
> New UNIX password:
> Retype new UNIX password:
> passwd: all authentication tokens updated successfully.
> bash-3.1# exit
>
>
>
> That's all.
> No you may umount your image and make
>
> %# xm create -c centos
>
> centos here is the name of the Xen domain config file
> which will run the image that you have prepared.
>
>
>
>
> >
> > Thanks.
> > Chris.
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
> --
> WBR, i.m.chubin
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home