WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] XEN - Broadcom issue: survey

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] XEN - Broadcom issue: survey
From: Pezza <mario.beccia@xxxxxxxxxx>
Date: Tue, 13 Nov 2007 13:39:27 -0800 (PST)
Delivery-date: Tue, 13 Nov 2007 13:40:13 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <4739C56C.9040204@xxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <4739C3AF.2060705@xxxxxxxxxxxxx> <4739C56C.9040204@xxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hey,

please note that if you're using the tg3 driver, it means you're using
NetXTreme *not* NetXTreme II (the latter is using the 5708/5706 chipsets,
the former some previous releases). 
The problem has been observed (but I'd like some confirmations here ;-))
using the bnx2 driver, which is specific to NetEXtreme II.

To make sure what driver/version/firmware you're using you can run 'ethtool
-i eth0' (replace eth0 with the ethernet device you want to show).

In my case, the "bad" machine shows:

[root@sofia ~]# ethtool -i peth0
driver: bnx2
version: 1.5.10c
firmware-version: 1.9.3
bus-info: 0000:03:00.0

while the "good" machine shows:
[root@camogli scripts]# ethtool -i eth0
driver: bnx2
version: 1.5.1c
firmware-version: 2.9.1
bus-info: 0000:08:00.0

As I said before, the only relevant difference I can find between the 2
machines is the eth0 firmware version, but I don't now if and how I can
update it on the other one (ref to my previous message for the complete
details on the good and bad machine configuration).

                                                                                
                        
M.




mangoo wrote:
> 
> Ivan Porro schrieb:
>> I totally agree with Luc Boudreau about this problem.
>> 
>> On modern branded server they ALL use Broadcom chipset... I must admit 
>> that:
>> 
>> a) lot of people are experiencing the problem but can tolerate it
>> 
>> or
>> 
>> b) someone already experienced this problem and solved it
> 
> Too bad you started a new topic without even trying to describe what 
> your problem with broadcom chipsets is?
> 
> I'm running Xen 3.1 (2.6.18 kernel), compiled from sources, on HP 
> ProLiant DL320 G3. It uses tg3 for its network cards.
> 
> Works fine.
> 
> 06:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 
> Gigabit Ethernet (rev 10)
> 06:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 
> Gigabit Ethernet (rev 10)
> 
> 
> 
> -- 
> Tomasz Chmielewski
> http://lists.wpkg.org
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 

-- 
View this message in context: 
http://www.nabble.com/XEN---Broadcom-issue%3A-survey-tf4798603.html#a13735207
Sent from the Xen - User mailing list archive at Nabble.com.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users