|
xen-users
Re: [Xen-users] Convert physical server to VM
Hi,
the problem is that you only copy the filesystem with tar command. You
must copy the FULL disc, to do this follow use dd, as I post before
dd if=/dev/hda | ssh root@xxxxxxxxxxxxxxxxx "/bin/dd of=/xen/images/myimage.img"
so the process will be:
1- dd if=/dev/zero of=image.img bs=1M count=4096 (if you have a 4GB HD, if your
physical HD is 4GB)
remember, the image must be at least the same size than your original HD)
2- stop old box, and boot with a LiveCD
3- Copy the disc to your XEN server
dd if=/dev/hda | ssh root@xxxxxxxxxxxxxxxxx "/bin/dd
of=/xen/images/myimage.img"
Good luck,
Marc
Chiu, PCM (Peter) wrote:
Thanks, Marc, for your speedy response.
I was hoping to set up a guest VM on existing Suse9/10 and Redhat4/5 systems.
Still, I use tar to copy the whole of the root directory tree on a running
Linux system
into the loop mounted image.
Here are the steps I took:
dd if=/dev/zero of=image bs=1k seek=10240k count=1
mkfs -t ext3 image
mount -o loop image /mnt/temp
cd /mnt/temp
ssh remote "tar -zaxHS -f - /" | tar -zxpf -
cd
umount /mnt/temp
I then use Yast2 xen to create a guest VM configuration
and start it. But it fails with the "Boot loader didn't return any data" error.
I also tried to re-create a vm configuration file by copying a working Suse
10.2 one,
but still hit the same fault.
So I suspect something is missing to make the above image to be bootable.
Any idea?
Peter
-----Original Message-----
From: Marc Patino Gómez [mailto:mpatino@xxxxxxxxxxxx]
Sent: 23 August 2007 14:24
To: Chiu, PCM (Peter)
Cc: Simon Gao; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Convert physical server to VM
Hi,
Chiu, PCM (Peter) wrote:
Hi, there,
I am watching this thread with interest.
Marc, can you repeat the actual steps you do to set up Linux guest
VMs, especially the ones using 2.4 kernels.
I have tried similar steps you mentioned, apart from the cp -pr
/lib/modules into the guest OS disk, but when I start up the guest VM,
it complains
If you are going to "full virtualitzed" a linux box you don't need to copy the
kernel's modules, you will use the unmodified old OS kernel ones, and the old kernel (of
course).
"boot loader didn't return any data!"
Have you copy the full HD? or only the partition?
It looks like something is missing to turn the root copied file system
to be bootable as a guest VM.
Thanks.
Peter
Good luck Peter,
Marc
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Marc
Patino Gómez
Sent: 23 August 2007 12:05
To: Simon Gao
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Convert physical server to VM
Hi,
rsync works great on production enviroments, I had paravirtualized some servers
with these method:
rsync -ave ssh --exclude=/proc --exclude=/sys --exclude=/dev (if you
are using udev) root@runingserver:/ /mnt/newserverimage/
after this:
mkdir /mnt/newserverimages/proc
mkdir /mnt/newserverimages/sys
mkdir /mnt/newserverimages/dev
review your fstab, and copy the kernel modules:
cp -pr /lib/modules/2.6.16-xenU /mnt/newserverimages/lib/modules/
more or less .... this is the way
Also I have full virtualitzed some old GNU/Linux boxes with kernels 2.4, I used
GNU/Linux live CD on the old box and dd utility:
dd if=/dev/hda | ssh root@xxxxxxxxxxxxxxxxx "/bin/dd
of=/dev/vg00/newvserver"
I hope it will be helpfull
Marc
Simon Gao wrote:
Hi,
Anyone has any suggestions on programs, utility or instructions on
how to convert a physical server to domU VM?
Thanks,
Simon
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
Home