Hello,
So, Your Linux is also installed on /dev/sda? I would saz this will
be ot possible to boot, because from mz opinion xen wants to have an
exclusive access to the writable device -dev-sda, what is ot possible, if
the Dom0 already runs from this device.
It You would have the second disk /dev/sdb with Linux used as Dom0,
i this case I think this should work - atz least the boot. But hte problems
come immediatelly after You boot to windows - because xen emulates all the
devices in other way like is the physical HW of Your computer, which has bee
already detected by the windows installation - so even if I did not test it
with w2k3, I think, the boot process could very probably end with the
"bluescreen"...
Two more remarks to Your configuration - even if You would have the above
conditions fullfilled You can run into problems if using the configuration
described by You:
1. I do not know, if the property
cdrom=
is still able to be used - in every case I would not mix the old syntax with
the new and instead of the line starting by cdrom= which I would delete I
would change the line with disk= as follows:
disk = [ 'phy:/dev/sda,ioemu:hda,w',
'file:/tmp/WINDOWS_2003_STANDARD.ISO,hdb,r' ]
2. I do ot know if You want to install/if You run 32bit or 64bit version,
but at least by the 64bit version I had to add the options
acpi=1
apic=1
pae=1
to get it working - at least in the case You have problems, You should
experiment with this set of parameters.
With best regards
Archie
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
tygrawy@xxxxxxxxx
Sent: Friday, July 20, 2007 9:40 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Windows uder XEN doesn't boot...
my w2k3.hvm:
import os, re
arch = os.uname()[4]
arch_libdir = 'lib'
kernel = '/usr/lib/xen/boot/hvmloader'
builder='hvm'
memory = 512
name = "w2k3-001"
vif = [ 'type=ioemu, mac=00:16:3e:00:00:94, bridge=xenbr0' ]
disk = disk = [ 'phy:/dev/sda,ioemu:hda,w' ]
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
cdrom='/tmp/WINDOWS_2003_STANDARD.ISO'
boot="c"
sdl=1
vnc=0
vncviewer=0
ne2000=0
so I am tryying boot Windows from a phisical disk where is linux
also with grub. After I star XEN I see grub and can choose Windows
to boot but I see chainloader (hd0,1)+1 and no more
/usr/sbin/xm dmesg returns:
(XEN) (GUEST: 4)
(XEN) (GUEST: 4) Booting from Hard Disk...
(XEN) (GUEST: 4) int13_harddisk: function 41, unmapped device for
ELDL=81
(XEN) (GUEST: 4) int13_harddisk: function 08, unmapped device for
ELDL=81
(XEN) (GUEST: 4) *** int 15h function AX=00C0, BX=0000 not yet
supported!
(XEN) (GUEST: 4) Trap (0x6) while in real mode
(XEN) (GUEST: 4) eax 2B6 ecx DAA edx 8F64 ebx
B70
(XEN) (GUEST: 4) esp D6934 ebp 0 esi 22E8 edi
123B
(XEN) (GUEST: 4) eip 75F2 eflags 33087 cs 50 ds
0
(XEN) (GUEST: 4) es 0 fs 0 uss 60
uesp 4602
(XEN) (GUEST: 4) ves 1ACB vds 0 vfs 60 vgs
60
(XEN) (GUEST: 4) trapno 6 errno 0
(XEN) (GUEST: 4) cr0 50032 cr2 0 cr3 0 cr4
651
(XEN) (GUEST: 4) Halt called from %eip 0xD0382
please help me!!!
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
__________ Informace od NOD32 2409 (20070720) __________
Tato zprava byla proverena antivirovym systemem NOD32.
http://www.nod32.cz
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home