Re: [Xen-users] no networking anymore

[Marc Patino Gómez <mpatino@xxxxxxxxxxxx>]

Great!

are you using udev? Search in udev config files and probably you will 
find key :)
Regards,

Marc


ko0nz wrote:
> hi Marc,
>
> my english is worse! :)
>
> it seems that with
> # ifconfig -a
> i can see a "eth4" but no "eth0"
> so i define an ip to eth4 and add default route to the gw
> and it works fine...
>
> i really don't know why "eth0" diddn't appear with th reboot of the 
> host...
> thank you for your help.
> peace!
>
> > sorry, after reading the first post I belived that problem was on dom0's
> > eth0 (my english is not as good as I want :) ), anyway the problem is in
> > your domU, and you can't see eth0 when you make an ifconfig -a ( the
> > flag "a" is important).
> >
> > When you boot your domU you see domU's eth0? Or the problem appears when
> > you restart the network init script?
> >
> > On the other hand, in your dom0 ifconfig shows vif2.0 (I supose that you
> > are only running one DomU), so... it's quite strange, also it shows
> >
> >          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >          TX packets:32 errors:0 dropped:9594 overruns:0 carrier:0
> >
> > it's dropping packets, you know why?
> >
> > Probably if you post  "xm create -c /etc/xen/oreon" output somebody
> > could help you, the output of a "brctl show" in dom0 will be helpful.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users