| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Upgrading to Xen 3.1.0 Dom0 on Centos 5
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I've had this very same problem, but I couldn't find a solution, other
than to not use LVM, which is what I settled on. I think you should
still be able to use LVM, just not for the root device, but I've not
tested that.
Martin
Brent Meshier wrote:
> During boot LVM complains that it can't find /dev/VolGroup00/LogVol00 and
> results in a kernel panic. I'm using Dell 1950's with Dual Xeon 5245's CPUs
> and 32GB RAM with the megaraid_sas kernel module. I've tried downloading
> the x86_64 binaries and creating an initrd with mkinitrd to load the
> necessary modules using this command:
>
> mkinitrd -v -f --with=megaraid_sas /boot/initrd-2.6.18-xen.img 2.6.18-xen
>
> Creating initramfs
> Looking for deps of module uhci-hcd
> Looking for deps of module ohci-hcd
> Looking for deps of module ehci-hcd
> Looking for deps of module ext3
> Looking for driver for device sda2
> Looking for deps of module
> pci:v00001028d00000015sv00001028sd00001F03bc01sc04i00
> Looking for deps of module megaraid_sas
> Looking for deps of module usb-storage
> Looking for deps of module ide-disk
> Looking for deps of module dm-mod
> Looking for deps of module dm-mirror
> Looking for deps of module dm-zero
> Looking for deps of module dm-snapshot
> Using modules: /lib/modules/2.6.18-xen/kernel/drivers/usb/host/uhci-hcd.ko
> /lib/modules/2.6.18-xen/kernel/drivers/usb/host/ohci-hcd.ko
> /lib/modules/2.6.18-xen/kernel/drivers/usb/host/ehci-hcd.ko
> /lib/modules/2.6.18-xen/kernel/fs/ext3/ext3.ko
> /lib/modules/2.6.18-xen/kernel/drivers/scsi/megaraid/megaraid_sas.ko
> /lib/modules/2.6.18-xen/kernel/drivers/usb/storage/usb-storage.ko
> /lib/modules/2.6.18-xen/kernel/drivers/ide/ide-disk.ko
> /lib/modules/2.6.18-xen/kernel/drivers/md/dm-mod.ko
> /lib/modules/2.6.18-xen/kernel/drivers/md/dm-mirror.ko
> /lib/modules/2.6.18-xen/kernel/drivers/md/dm-zero.ko
> /lib/modules/2.6.18-xen/kernel/drivers/md/dm-snapshot.ko
> /sbin/nash -> /tmp/initrd.PY4420/bin/nash
> /sbin/insmod.static -> /tmp/initrd.PY4420/bin/insmod
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/usb/host/uhci-hcd.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/uhci-hcd.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/usb/host/ohci-hcd.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/ohci-hcd.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/usb/host/ehci-hcd.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/ehci-hcd.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/fs/ext3/ext3.ko' [elf64-x86-64] to
> `/tmp/initrd.PY4420/lib/ext3.ko' [elf64-x86-64]
> copy from
> `/lib/modules/2.6.18-xen/kernel/drivers/scsi/megaraid/megaraid_sas.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/megaraid_sas.ko' [elf64-x86-64]
> copy from
> `/lib/modules/2.6.18-xen/kernel/drivers/usb/storage/usb-storage.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/usb-storage.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/ide/ide-disk.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/ide-disk.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/md/dm-mod.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/dm-mod.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/md/dm-mirror.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/dm-mirror.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/md/dm-zero.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/dm-zero.ko' [elf64-x86-64]
> copy from `/lib/modules/2.6.18-xen/kernel/drivers/md/dm-snapshot.ko'
> [elf64-x86-64] to `/tmp/initrd.PY4420/lib/dm-snapshot.ko' [elf64-x86-64]
> /sbin/lvm.static -> /tmp/initrd.PY4420/bin/lvm
> /etc/lvm -> /tmp/initrd.PY4420/etc/lvm
> `/etc/lvm/lvm.conf' -> `/tmp/initrd.PY4420/etc/lvm/lvm.conf'
> Adding module uhci-hcd
> Adding module ohci-hcd
> Adding module ehci-hcd
> Adding module ext3
> Adding module megaraid_sas
> Adding module usb-storage
> Adding module ide-disk
> Adding module dm-mod
> Adding module dm-mirror
> Adding module dm-zero
> Adding module dm-snapshot
>
>
>>From what I can tell at boot, it's either not loading the megaraid_sas
> module or at least not correctly. Here is a screenshot:
>
> http://meshier.com/wp-content/uploads/2007/07/panic.jpg
>
> On a side note, I thought it might be easier to build from source RPM, but
> apparently there is no support:
>
> /usr/bin/rpmbuild --rebuild xen-3.1.0-1.src.rpm
> Installing xen-3.1.0-1.src.rpm
> error: Architecture is not included: x86_64
>
> So any ideas why it won't mount root?
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFGmyR4RnwIDhcMR9MRAvzZAJwO6/CLC+xfganD5q5jhi/BP1KfpwCgrifR
5xAHHabogHj6h3sq+J010kg=
=aVu0
-----END PGP SIGNATURE-----
m.j.goldstone.vcf
Description: Vcard
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home
