WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Error creating HVM domain in Xen-3.1

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Error creating HVM domain in Xen-3.1
From: "Nidhi Aggarwal" <aggarwalnidhi@xxxxxxxxx>
Date: Sat, 14 Jul 2007 11:49:14 -0400
Delivery-date: Sat, 14 Jul 2007 08:47:11 -0700
Dkim-signature: a=rsa-sha1; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; b=e9dt5UsFGPZF/RGbQRSabPVIgUO/is1XmRZxtNSfGyQOWdzOcqlz8GrWQuvw2s4XaJwMe54JE42RcfeN06vIlRkufa8kCHvGbZ5dHaJQlhHByCw6zkOMQ4pwOHNR3SUBLDv9u4cQ3nJ8SUMFf9N+XQmOSXJlFcul1/OimqpwpPo=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:mime-version:content-type; b=MzoqJRpGW3Zya3WQHiTL5LQ99qwt57aLhzKPK0RmMlzUiBQIMT5DX8XD3KEZgGvTaMgCUngpodMAdkfzR6XYbRxXkHXvLmJFjWFCqADNjxRAwBVPvt68wWutBKXGliyWGxqKM3tv1XfWjBEOYn+Dpz/ZsrD3M++cIKYBpOMlTRc=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hi,

I am trying  to set up fully virtualized guest VMs (Fedora core 6) on Xen -3.1 on a AMD Opteron SVM enabled system (blade with 2 dual cores). I followed the instructions in the user manual to create an image of the OS. I have included the configuration file that I am using and also information using xm info. I am a newbie to Xen installation and would really appreciate help and suggestions.
 


Following is the error message I get when I try the command  xm create -c xmexample.hvm   .  (I have also tried xm create xmexample.hvm but the VM doesnt work)

Using config file "./xmexample.hvm".
Started domain HVM1
Unexpected error: exceptions.OSError

Please report to xen-devel@xxxxxxxxxxxxxxxxxxx
Traceback (most recent call last):
  File "/usr/sbin/xm", line 10, in ?
    main.main(sys.argv)
  File "//usr/lib64/python/xen/xm/main.py", line 2453, in main
    _, rc = _run_cmd(cmd, cmd_name, args)
  File "//usr/lib64/python/xen/xm/main.py", line 2477, in _run_cmd
    return True, cmd(args)
  File "<string>", line 1, in <lambda>
  File "//usr/lib64/python/xen/xm/main.py", line 1266, in xm_importcommand
    cmd.main([command] + args)
  File "//usr/lib64/python/xen/xm/create.py", line 1292, in main
    do_console(sxp.child_value (config, 'name', -1))
  File "//usr/lib64/python/xen/xm/create.py", line 1317, in do_console
    (p, rv) = os.waitpid(cpid, os.WNOHANG)
OSError: [Errno 10] No child processes



Xm info

host                   : bladespp-c9
release                : 2.6.18-xen
version                : #1 SMP Fri Jul 13 11:05:30 PDT 2007
machine                : x86_64
nr_cpus                : 4
nr_nodes               : 1
sockets_per_node       : 2
cores_per_socket       : 2
threads_per_core       : 1
cpu_mhz                : 2400
hw_caps                : 178bfbff:ebd3fbff:00000000:00000010:00002001:00000000:0000001f
total_memory           : 16381
free_memory            : 526
xen_major              : 3
xen_minor              : 1
xen_extra              : .0
xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler          : credit
xen_pagesize           : 4096
platform_params        : virt_start=0xffff800000000000
xen_changeset          : Fri May 18 16:59:32 2007 +0100 15042:c0b0974fb055
cc_compiler            : gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)
cc_compile_by          : nidhia
cc_compile_domain      :
cc_compile_date        : Fri Jul 13 11:12:43 PDT 2007
xend_config_format     : 4


CONFIGURATION FILE


#  -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================

import os, re
arch = os.uname()[4]
if re.search('64', arch):
    arch_libdir = 'lib64'
else:
    arch_libdir = 'lib'

#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"

# The domain build function. HVM domain uses 'hvm'.
builder='hvm'

# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
#          memory errors. The domain needs enough memory to boot kernel
#          and modules. Allocating less than 32MBs is not recommended.
memory = 512

# Shadow pagetable memory for the domain, in MB.
# Should be at least 2KB per MB of domain memory, plus a few MB per vcpu.
# shadow_memory = 8

# A name for your domain. All domains must have different names.
name = "HVM1"

# 128-bit UUID for the domain.  The default behavior is to generate a new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"

#-----------------------------------------------------------------------------
# The number of cpus guest platform has, default=1
#vcpus=1

# Enable/disable HVM guest PAE, default=1 (enabled)
#pae=1

# Enable/disable HVM guest ACPI, default=1 (enabled)
#acpi=1

# Enable/disable HVM APIC mode, default=1 (enabled)
# Note that this option is ignored if vcpus > 1
#apic=1

# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = ""         # leave to Xen to pick
#cpus = "0"        # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5

# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ]
# type=ioemu specify the NIC is an ioemu device not netfront
#vif = [ 'type=ioemu, bridge=eth0' ]

#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.

#disk = [ 'phy:hda1,hda1,r' ]
disk = [ 'file:/home/nidhia/guestos/hd.img,ioemu:sda,w']

#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits.  There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash.  For each of these you
# may specify:
#
#   "destroy",        meaning that the domain is cleaned up as normal;
#   "restart",        meaning that a new domain is started in place of the old
#                     one;
#   "preserve",       meaning that no clean-up is done until the domain is
#                     manually destroyed (using xm destroy, for example); or
#   "rename-restart", meaning that the old domain is not cleaned up, but is
#                     renamed and a new domain started in its place.
#
# The default is
#
#   >#   on_reboot   = 'restart'
#   on_crash    = 'restart'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means >#                            on_reboot   = 'restart'
#                            on_crash    = 'destroy'
#
# restart = 'always'   means >#                            on_reboot   = 'restart'
#                            on_crash    = 'restart'
#
# restart = 'never'    means >#                            on_reboot   = 'destroy'
#                            on_crash    = 'destroy'

#
#on_reboot   = 'restart'
#on_crash    = 'restart'

#============================================================================

# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'

#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
#boot="cda"

#-----------------------------------------------------------------------------
#  write to temporary files instead of disk image files
#snapshot=1

#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=0

#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=1

#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten=" 127.0.0.1"

#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1

#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1

#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0

#----------------------------------------------------------------------------
# set password for domain's VNC console
# default is depents on vncpasswd in xend-config.sxp
vncpasswd='abc123'

#----------------------------------------------------------------------------
# no graphics, use serial port
nographic=0

#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0

#-----------------------------------------------------------------------------
#   serial port re-direct to pty deivce, /dev/pts/n
#   then xm console or minicom can connect
serial='pty'


#-----------------------------------------------------------------------------
#   Qemu Monitor, default is disable
#   Use ctrl-alt-2 to connect
#monitor=1


#-----------------------------------------------------------------------------
#   enable sound card support, [sb16|es1370|all|..,..], default none
#soundhw='sb16'


#-----------------------------------------------------------------------------
#    set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1


#-----------------------------------------------------------------------------
#    set the real time clock offset in seconds [default=0 i.e. same as dom0]
#rtc_timeoffset=3600

#-----------------------------------------------------------------------------
#    start in full screen
#full-screen=1  


#-----------------------------------------------------------------------------
#   Enable USB support (specific devices specified at runtime through the
#                       monitor window)
#usb=1

#   Enable USB mouse support (only enable one of the following, `mouse' for
#                             PS/2 protocol relative mouse, `tablet' for
#                             absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'

#-----------------------------------------------------------------------------
#   Set keyboard layout, default is en-us keyboard.
#keymap='ja'

 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>
  • [Xen-users] Error creating HVM domain in Xen-3.1, Nidhi Aggarwal <=