Bootdata ok (command line is root=/dev/mapper/VG_HIGHLAND_SYSTEM-LV_DOM0 ro max_loop=254 vga=788) Linux version 2.6.18-xen (shand@endor) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 SMP Fri May 18 16:01:42 BST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000c800000 (usable) DMI 2.5 present. On node 0 totalpages: 51200 DMA zone: 51200 pages, LIFO batch:15 ACPI: RSDP (v002 INTEL ) @ 0x00000000000f03b0 ACPI: XSDT (v001 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb39120 ACPI: FADT (v003 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb37000 ACPI: MADT (v001 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb36000 ACPI: SPCR (v001 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb2f000 ACPI: HPET (v001 INTEL S5000PAL 0x00000001 INTL 0x01000013) @ 0x000000007fb2e000 ACPI: MCFG (v001 INTEL S5000PAL 0x00000001 INTL 0x01000013) @ 0x000000007fb2d000 ACPI: DSDT (v002 INTEL S5000PAL 0x00000008 INTL 0x01000013) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at b8000000 (gap: b0000000:4fc00000) Built 1 zonelists. Total pages: 51200 Kernel command line: root=/dev/mapper/VG_HIGHLAND_SYSTEM-LV_DOM0 ro max_loop=254 vga=788 Initializing CPU#0 PID hash table entries: 1024 (order: 10, 8192 bytes) Xen reported: 1995.078 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: ffff88000189c000 - ffff880001a9c000 Address size: 25 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 171248k/204800k available (2014k kernel code, 25036k reserved, 874k data, 172k init) Calibrating delay using timer specific routine.. 3992.00 BogoMIPS (lpj=19960029) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 migration_cost=7725 checking if image is initramfs... it is Freeing initrd memory: 14906k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:0e:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO.PCIA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0003 pnp: PnP ACPI: found 13 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: match found with the PnP device '00:06' and the driver 'system' pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f could not be reserved pnp: 00:06: ioport range 0x800-0x87f has been reserved PCI: Bridge: 0000:03:00.0 IO window: 3000-3fff MEM window: b8900000-b89fffff PREFETCH window: b8e00000-b8ffffff PCI: Bridge: 0000:03:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: 3000-3fff MEM window: b8900000-b89fffff PREFETCH window: b8e00000-b8ffffff PCI: Bridge: 0000:02:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: 2000-2fff MEM window: b8000000-b88fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-3fff MEM window: b8000000-b89fffff PREFETCH window: b8e00000-b8ffffff PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 2000-3fff MEM window: b8000000-b8afffff PREFETCH window: b8e00000-b8ffffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: b8b00000-b8bfffff PREFETCH window: b0000000-b7ffffff GSI 16 sharing vector 0xA0 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:03:00.2 to 64 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:01.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 4096 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered IA-32 Microcode Update Driver: v1.14a-xen audit: initializing netlink socket (disabled) audit(1182358742.410:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 254 devices) Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0a' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 172k freed fan: no version for "struct_module" found: kernel tainted. ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x1 ACPI: Processor [CPU2] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 GSI 17 sharing vector 0xA8 and IRQ 17 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x00004080 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. SCSI subsystem initialized Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SAS Host driver 3.04.01 GSI 18 sharing vector 0xB0 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00004060 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x00004040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004020 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 16 (level, low) -> IRQ 16 ESB2: IDE controller at PCI slot 0000:00:1f.1 GSI 19 sharing vector 0xB8 and IRQ 19 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 19 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x40a0-0x40a7, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0x40a8-0x40af, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... mptbase: Initiating ioc0 bringup usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: CHESEN PS2 to USB Converter as /class/input/input0 input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.3-1 input: CHESEN PS2 to USB Converter as /class/input/input1 input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.3-1 usbcore: registered new driver usbhid /local/scratch/shand/3.1.0/64-3.1-testing.hg/linux-2.6.18-xen/drivers/usb/input/hid-core.c: v2.6:USB HID core driver hdb: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ioc0: SAS1068: Capabilities={Initiator} ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 17, io mem 0xb8c00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 4-1: USB disconnect, address 2 usb 4-1: new low speed USB device using uhci_hcd and address 3 usb 4-1: configuration #1 chosen from 1 choice input: CHESEN PS2 to USB Converter as /class/input/input2 input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.3-1 input: CHESEN PS2 to USB Converter as /class/input/input3 input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.3-1 scsi0 : ioc0: LSISAS1068, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=16 Vendor: ATA Model: WDC WD5000YS-01M Rev: 2E09 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD5000YS-01M Rev: 2E09 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD5000YS-01M Rev: 2E09 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD5000YS-01M Rev: 2E09 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD5000YS-01M Rev: 2E09 Type: Direct-Access ANSI SCSI revision: 05 GSI 20 sharing vector 0xC0 and IRQ 20 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:07:00.0 to 64 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:04:23:dc:d1:60 hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 sda: Write Protect is off sda: Mode Sense: 73 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 73 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 73 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection GSI 21 sharing vector 0xC8 and IRQ 21 ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:07:00.1 to 64 sdb: Write Protect is off sdb: Mode Sense: 73 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 0:0:1:0: Attached scsi disk sdb SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB) e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:04:23:dc:d1:61 sdc: Write Protect is off sdc: Mode Sense: 73 00 00 08 SCSI device sdc: drive cache: write back SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB) sdc: Write Protect is off sdc: Mode Sense: 73 00 00 08 SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sd 0:0:2:0: Attached scsi disk sdc SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) sdd: Write Protect is off sdd: Mode Sense: 73 00 00 08 SCSI device sdd: drive cache: write back SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB) e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection sdd: Write Protect is off sdd: Mode Sense: 73 00 00 08 SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sd 0:0:3:0: Attached scsi disk sdd SCSI device sde: 976773168 512-byte hdwr sectors (500108 MB) sde: Write Protect is off sde: Mode Sense: 73 00 00 08 SCSI device sde: drive cache: write back SCSI device sde: 976773168 512-byte hdwr sectors (500108 MB) sde: Write Protect is off sde: Mode Sense: 73 00 00 08 SCSI device sde: drive cache: write back sde: sde1 sde2 sd 0:0:4:0: Attached scsi disk sde Probing IDE interface ide1... md: raid1 personality registered for level 1 md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors md: md2 stopped. md: bind md: bind md: bind raid1: raid set md2 active with 2 out of 2 mirrors md: md3 stopped. md: bind md: bind md: bind raid1: raid set md3 active with 2 out of 2 mirrors device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ts: Compaq touchscreen protocol output Intel 82802 RNG detected input: PC Speaker as /class/input/input4 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 19 EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4194296k swap on /dev/mapper/VG_HIGHLAND_SYSTEM-LV_DOM0_SWAP0. Priority:-1 extents:1 across:4194296k Adding 4194296k swap on /dev/mapper/VG_HIGHLAND_SYSTEM-LV_DOM0_SWAP1. Priority:-2 extents:1 across:4194296k e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Bridge firewalling registered device vif0.1 entered promiscuous mode audit(1182358776.674:2): dev=vif0.1 prom=256 old_prom=0 auid=4294967295 xenbr1: port 1(vif0.1) entering learning state ADDRCONF(NETDEV_UP): peth1: link is not ready xenbr1: topology change detected, propagating xenbr1: port 1(vif0.1) entering forwarding state e1000: peth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready device peth1 entered promiscuous mode audit(1182358780.734:3): dev=peth1 prom=256 old_prom=0 auid=4294967295 xenbr1: port 2(peth1) entering learning state xenbr1: topology change detected, propagating xenbr1: port 2(peth1) entering forwarding state vif0.1: no IPv6 routers present peth1: no IPv6 routers present eth1: no IPv6 routers present tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky device tap0 entered promiscuous mode audit(1182359105.764:4): dev=tap0 prom=256 old_prom=0 auid=4294967295 device vif2.0 entered promiscuous mode audit(1182359105.854:5): dev=vif2.0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 4(vif2.0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 4(vif2.0) entering forwarding state xenbr1: port 3(tap0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 3(tap0) entering forwarding state ip_tables: (C) 2000-2006 Netfilter Core Team vif2.0: no IPv6 routers present tap0: no IPv6 routers present xenbr1: port 4(vif2.0) entering disabled state device vif2.0 left promiscuous mode audit(1182359222.074:6): dev=vif2.0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 4(vif2.0) entering disabled state xenbr1: port 3(tap0) entering disabled state device tap0 left promiscuous mode audit(1182359222.204:7): dev=tap0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 3(tap0) entering disabled state device tap0 entered promiscuous mode audit(1182359624.754:8): dev=tap0 prom=256 old_prom=0 auid=4294967295 device vif3.0 entered promiscuous mode audit(1182359624.804:9): dev=vif3.0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 4(vif3.0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 4(vif3.0) entering forwarding state xenbr1: port 3(tap0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 3(tap0) entering forwarding state vif3.0: no IPv6 routers present tap0: no IPv6 routers present xenbr1: port 3(tap0) entering disabled state device tap0 left promiscuous mode audit(1182359820.924:10): dev=tap0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 3(tap0) entering disabled state xenbr1: port 4(vif3.0) entering disabled state device vif3.0 left promiscuous mode audit(1182359821.054:11): dev=vif3.0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 4(vif3.0) entering disabled state device tap0 entered promiscuous mode audit(1182359948.174:12): dev=tap0 prom=256 old_prom=0 auid=4294967295 device vif4.0 entered promiscuous mode audit(1182359948.264:13): dev=vif4.0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 4(vif4.0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 4(vif4.0) entering forwarding state xenbr1: port 3(tap0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 3(tap0) entering forwarding state vif4.0: no IPv6 routers present tap0: no IPv6 routers present xenbr1: port 3(tap0) entering disabled state device tap0 left promiscuous mode audit(1182360144.504:14): dev=tap0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 3(tap0) entering disabled state xenbr1: port 4(vif4.0) entering disabled state device vif4.0 left promiscuous mode audit(1182360144.694:15): dev=vif4.0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 4(vif4.0) entering disabled state device vif5.0 entered promiscuous mode audit(1182360522.514:16): dev=vif5.0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 3(vif5.0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 3(vif5.0) entering forwarding state device tap0 entered promiscuous mode audit(1182360526.164:17): dev=tap0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 4(tap0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 4(tap0) entering forwarding state vif5.0: no IPv6 routers present tap0: no IPv6 routers present xenbr1: port 3(vif5.0) entering disabled state device vif5.0 left promiscuous mode audit(1182413769.164:18): dev=vif5.0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 3(vif5.0) entering disabled state xenbr1: port 4(tap0) entering disabled state device tap0 left promiscuous mode audit(1182413769.324:19): dev=tap0 prom=0 old_prom=256 auid=4294967295 xenbr1: port 4(tap0) entering disabled state device vif6.0 entered promiscuous mode audit(1182420297.514:20): dev=vif6.0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 3(vif6.0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 3(vif6.0) entering forwarding state device tap0 entered promiscuous mode audit(1182420300.974:21): dev=tap0 prom=256 old_prom=0 auid=4294967295 xenbr1: port 4(tap0) entering learning state xenbr1: topology change detected, propagating xenbr1: port 4(tap0) entering forwarding state vif6.0: no IPv6 routers present tap0: no IPv6 routers present