WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Xen domU networking problem Centos5

To: xen-users <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] Xen domU networking problem Centos5
From: majid baruze <majid.baruze@xxxxxxxxxxxxxxxxxxx>
Date: Thu, 21 Jun 2007 18:59:54 +0200
Delivery-date: Thu, 21 Jun 2007 09:58:24 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Reply-to: majid.baruze@xxxxxxxxxxxxxxxxxxx
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hi all,

I have to assign one of two PCI Ethernet adapters of my Pc to use noly
in domU. I try network-bridging without success.

Anybody can help me with that?

# lspci | grep Ethernet
05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet 
Controller (Copper) (rev 01)
05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet 
Controller (Copper) (rev 01)

------
dom0: (grub config)
------
title CentOS (2.6.18-8.el5xen)
        root (hd0,0)
        kernel /xen.gz-2.6.18-8.el5
        module /vmlinuz-2.6.18-8.el5xen ro root=/dev/VGsystem/LVroot \
rhgb quiet pci=routeirq pciback.permissive
                         pciback.hide=(05:00.1)
        module /initrd-2.6.18-8.el5xen.img

------
my network-bridge script:

#!/bin/sh
# Exit if anything goes wrong.
set -e
#
# First arg is the operation.
OP=$1
shift
#
script=/etc/xen/scripts/network-bridge
#
case ${OP} in
 start)
       $script start vifnum=0 bridge=xbr0 netdev=eth0
       $script start vifnum=1 bridge=xbr1 netdev=eth1
       ;;
   stop)
       $script stop vifnum=0 bridge=xbr0 netdev=eth0
       $script stop vifnum=1 bridge=xbr1 netdev=eth1
       ;;
   status)
       $script status vifnum=0 bridge=xbr0 netdev=eth0
       $script status vifnum=1 bridge=xbr1 netdev=eth1
       ;;
   *)
      echo 'Comando sconosciuto: ' ${OP}
      echo 'Utilizza: start, stop, status'
      exit 1
esac


-----
domU: (domain config)
-----
name = "xen1"
builder = "hvm"
memory = "1000"
disk = [ 'phy:/dev/VGsystem/Lvxen1,hda,w' ]
pci = [ '05.00.1' ]
vif = [ 'mac=00:16:3e:23:54:9b,bridge=xenbr1' ]
uuid = "cd2eeef9-e079-e158-b10f-3e21914afcee"
device_model = "/usr/lib/xen/bin/qemu-dm"
kernel = "/usr/lib/xen/boot/hvmloader"
vnc=1
vncunused=1
apic=1
acpi=1
pae=1
vcpus=1
serial = "pty" # enable serial console
on_reboot   = 'restart'
on_crash    = 'restart'






_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>