|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] Error: Device 0 (vif) could not be connected. Could not find
[Please cc me for the reply since I am not on the list]
Hi all,
I am new to Xen and I ran into some problem when trying to
xm create a FC6 domU with Xen 3.1. My dom0 is a FC5 running
the 2.6.18-xen kernel. This might just be a stupid configuration
issue that I am not aware of so please bear with me.
Here is what my cfg file looks like:
kernel = "/boot/vmlinuz-2.6.18-xen"
memory = 256
name = "fedora.fc6"
disk = ['file:/home/ljohnson/stuff/xen/fc6/fedora.fc6.img,sda1,w',
'file:/home/ljohnson/stuff/xen/fc6/fedora.swap,sda2,w']
root = "/dev/sda1 ro"
vif = [ '' ]
I was able to start the domain without the virtual nic. However,
with the vif in the cfg file, I got the following error when
creating the domain:
Error: Device 0 (vif) could not be connected. Could not find bridge, and none was specified
I have already turned off iptables on my machine and dom0's network
seems to work fine. I have also used "vif = [ '', "bridge=xenbr0' ] but
the same error still shows up. If I set the mac address myself by
"vif = [ 'mac=00:16:3e:00:00:11, bridge=xenbr0' ]", xm create hangs
and attempt to switch to the domU's console with "xm consle fedora.fc6"
also hangs. Any suggestion on where to look ?
The output from brctl show:
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif0.0
peth0
The output from ifconfig:
eth0 Link encap:Ethernet HWaddr 00:12:3F:FC:47:AF
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fefc:47af/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
RX packets:2090 errors:0 dropped:0 overruns:0 frame:0
TX packets:2301 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1467230 (1.3 MiB) TX bytes:377124 (368.2 KiB)
eth1 Link encap:Ethernet HWaddr 00:13:CE:67:E4:31
inet6 addr: fe80::213:ceff:fe67:e431/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:220 errors:0 dropped:34 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:263858 (257.6 KiB) TX bytes:588 (588.0 b)
Interrupt:18 Base address:0xc000 Memory:dfbff000-dfbfffff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:686 errors:0 dropped:0 overruns:0 frame:0
TX packets:686 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:107785 (105.2 KiB) TX bytes:107785 (105.2 KiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2088 errors:0 dropped:0 overruns:0 frame:0
TX packets:2304 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1476466 (1.4 MiB) TX bytes:388212 (379.1 KiB)
Interrupt:16
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2301 errors:0 dropped:0 overruns:0 frame:0
TX packets:2091 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:377124 (368.2 KiB) TX bytes:1467300 (1.3 MiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:41 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3276 (3.1 KiB) TX bytes:0 (0.0 b)
Regards,
Levin
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] Error: Device 0 (vif) could not be connected. Could not find bridge....,
Levin Johnson <=
|
|
|
|
|