| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Multiple Bridges Fail to Start
Schober Walter wrote:
Hi Tony!
Maybe not a solution to your problem, but it may help you to reach the
target:
I played around with that for days without getting it solved, so I left
that interface thing out of Xen. Means: Configure the Bridges and
Interfaces and all that acc. to your distro, e.g. ifcfg-xenbr0,
ifcfg-xenbr1, ifcfg-eth0, ... on Redhat (I can provide the infos, if you
need them).
Also just replace the network-script with a network-script-dummy, which
simply does nothing.
With that method I managed it to have VLANs on bonding interfaces
bridged into xenbr0 and xenbr1.
But keep the names xenbr0 and xenbr1 - they are used too often somewhere
;-)
Br
Walter
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Anthony G
Angerame
Sent: Sunday, June 10, 2007 2:32 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Multiple Bridges Fail to Start
Hi,
I am using Xen 3.0.2 on SUSE SLES 10. I have created a
script in /etc/xen/scripts called "network-mybridges" and
use two lines to setup xenbr0 and xenbr1. When executed
manually the script works fine and creates xenbr0 and
xenbr1. I can then xm create -c <vmname>. with absolutely
no issues. It just won't work at boot time. It appears
that the vif-bridge script is shutting down and deleting
the devices (xenbr) at boot time instead of bringing them
up. The script is configured into
/etc/xen/xend-config.sxp.
Here is an excerpt from /var/log/messages:
2357 May 31 16:57:04 zeus kernel: eth1: no IPv6 routers
present
2358 May 31 16:57:04 zeus logger:
/etc/xen/scripts/vif-bridge: online XENBUS_
PATH=backend/vif/1/0 2359 May 31 16:57:04 zeus logger:
/etc/xen/scripts/block: add XENBUS_PATH=bac kend/vbd/1/768
2360 May 31 16:57:04 zeus logger:
/etc/xen/scripts/vif-bridge: online XENBUS_
PATH=backend/vif/1/1 2361 May 31 16:57:04 zeus logger:
/etc/xen/scripts/block: add XENBUS_PATH=bac kend/vbd/1/832
Thanks in advance,
Tony
2362 May 31 16:57:04 zeus kernel: NET: Registered
protocol family 17
2363 May 31 16:57:04 zeus ifup: vif1.0
2364 May 31 16:57:04 zeus ifup: No configuration found for
vif1 .0 2365 May 31 16:57:04 zeus ifup: vif1.1 2366 May 31
16:57:04 zeus ifup: No configuration found for vif1 .1
2367 May 31 16:57:04 zeus logger: /etc/xen/scripts/block:
Writing backend/vbd /1/768/node /dev/loop0 to xenstore.
2368 May 31 16:57:04 zeus logger: /etc/xen/scripts/block:
Writing backend/vbd /1/768/physical-device 7:0 to
xenstore. 2369 May 31 16:57:04 zeus logger:
/etc/xen/scripts/block: Writing backend/vbd
/1/768/hotplug-status connected to xenstore.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Walter,
Hmmmm well hopefully in the next release (Coming soon?). I know it's in
the timing of the startup so I may play with that. Thanks for your reply
it's nice to know it is an error others are experiencing. If you have
any more info please pass it on and I will likewise let you know what I
come up with.
Thanks,
Tony
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home