| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Multicast
Hi,
On Wed, 2007-05-30 at 03:04 -0700, Jayson Vantuyl wrote:
> You shouldn't have an IP on xenbr0. It shouldn't have multicast
> turned on either. This might be part of the problem. Did you do
> this or is this happening automatically?
This happens automatically; this is how the network scripts set up
xen-br0.
Note that this is xen 2.0 rather than a more recent version. I've seen
suggestion that multicast didn't work under older versions of Xen. Is
that accurate?
Cheers,
-S.
>
> On May 29, 2007, at 3:22 AM, Stephen Strowes wrote:
>
> > Hi,
> >
> > I've been searching for a solution to my problem, but as yet have not
> > found it. I've seen suggestion via Google that my version of Xen might
> > not support what I'm trying to do. Here goes anyway:
> >
> > I have a bunch of VMs running over a handful of physical machines. I'm
> > using bridging as an easy way to give domU's access to the network. I
> > can't get the physical machines to forward the multicast traffic
> > generated by the virtual machines.
> >
> > My domU's can all route multicast traffic between each other provided
> > they're hosted on the same physical machine, but multicast traffic
> > doesn't seem to be routed over xen-br0 to dom0, nor from dom0 back
> > into
> > the domU's.
> >
> > Given that I can multicast traffic within the scope of one physical
> > machine, but not outwith, I assume what I need is to get xen-br0 to
> > forward multicast traffic. But how?
> >
> > Below is a bunch of (hopefully) useful information:
> >
> > dom0 Kernel version:
> > Linux nsmc16 2.6.11.10-xen0 #1 Thu May 10 15:45:26 BST 2007 i686
> > i686 i386 GNU/Linux
> >
> > example domU kernel version:
> > Linux nsmc71.dcs.gla.ac.uk 2.6.11.10-xenU #1 Thu May 10 15:48:40
> > BST 2007 i686 i686 i386 GNU/Linux
> >
> > ifconfig outputs:
> > eth0 Link encap:Ethernet HWaddr 00:12:3F:68:36:96
> > inet addr:130.209.251.16 Bcast:130.209.255.255 Mask:255.255.240.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:12569448 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:2034982 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:1834684880 (1.7 GiB) TX bytes:594688573 (567.1 MiB)
> > Base address:0xdcc0 Memory:dfbe0000-dfc00000
> >
> > xen-br0 Link encap:Ethernet HWaddr 00:12:3F:68:36:96
> > inet addr:130.209.251.16 Bcast:130.209.255.255 Mask:255.255.255.255
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:11277419 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:92312 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:1057505519 (1008.5 MiB) TX bytes:7820231 (7.4 MiB)
> >
> > And an example vif:
> > vif30.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:553608 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11544969 errors:0 dropped:15753 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:404685898 (385.9 MiB) TX bytes:1246144262 (1.1 GiB)
> >
> >
> > Might anybody be able to shed some light on this issue? I can't
> > upgrade
> > to a newer version of xen, unless the upgrade is trivial. The
> > closest to
> > my problem which I have seen is:
> > http://lists.xensource.com/archives/html/xen-users/2006-11/
> > msg00510.html, which received no responses.
> >
> >
> > Cheers,
> > -S.
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home