| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
[Xen-users] wireless network not working on my dom0
Hello, Im failing to get my dom0 network to function properly, Im using a
wireless card (eth1) along with my disabled network card (eth0). It looks
like xen is configuring everything properly but im not able to ping even my
router (10.0.0.2)
Some important outputs bellow:
lsmod
Module Size Used by
bridge 48148 0
lp 8452 0
nls_iso8859_15 4544 1
ntfs 99828 1
dm_mod 48120 2
bonding 81844 0
usblp 11392 0
eth1394 17220 0
usb_storage 32132 0
ipw2200 174380 0
ieee80211 28680 1 ipw2200
ieee80211_crypt 4800 1 ieee80211
ohci1394 31088 0
ieee1394 298168 2 eth1394,ohci1394
tg3 95812 0
i2c_i801 7692 0
parport_pc 22020 1
parport 20224 2 lp,parport_pc
ehci_hcd 27272 0
i2c_core 16848 1 i2c_i801
uhci_hcd 30160 0
snd_intel8x0m 13900 0
ifconfig
eth1 Link encap:Ethernet HWaddr 00:0E:35:87:C7:94
inet addr:10.0.0.14 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:8592 (8.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:166 errors:0 dropped:0 overruns:0 frame:0
TX packets:166 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15264 (14.9 KiB) TX bytes:15264 (14.9 KiB)
peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST NOARP MTU:1500 Metric:1
RX packets:2110 errors:0 dropped:0 overruns:0 frame:0
TX packets:877 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:3214 (3.1 KiB)
Interrupt:5 Base address:0x8000 Memory:e0210000-e0210fff
vif0.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:93 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8592 (8.3 KiB) TX bytes:0 (0.0 b)
xenbr1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:93 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7290 (7.1 KiB) TX bytes:0 (0.0 b)
network-bridge status
============================================================
5: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
link/ether 00:0e:35:87:c7:94 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.14/24 brd 10.0.0.255 scope global eth1
14: xenbr1: <BROADCAST,NOARP,UP> mtu 1500 qdisc noqueue
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
bridge name bridge id STP enabled interfaces
xenbr1 8000.feffffffffff no vif0.1
peth1
10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.14
default via 10.0.0.2 dev eth1
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth1
============================================================
/etc/network/interfaces
#wiless at home
auto eth1
iface eth1 inet static
wireless-key *********
address 10.0.0.14
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.2
Any help or guidance would be appreciated.
_________________________________________________________________
MSN Messenger: instale grátis e converse com seus amigos.
http://messenger.msn.com.br
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home