xen-users
Re: [Xen-users] error creating domain in xen 3.0.5
take a look
(XEN) System RAM: 2015MB
(2064000kB)
total_memory
: 534763
[root@vps auto]# xm dmesg __
__ _____
___
____
_ _ \ \/ /___ _ __ |___ / / _ \ |
___| _ __ ___| || | \ // _ \ '_
\ |_ \| | | ||___ \ __| '__/ __| || |_ /
\ __/ | | | ___) | |_| | ___) |__| | | (__|__
_| /_/\_\___|_| |_| |____(_)___(_)____/ |_|
\___| |_|
Xen version 3.0.5-rc4 (root@xxxxxxxxxxxxxxxx) (gcc
version 4.1.2 20070424 (Red Hat 4.1.2-11)) Mon Apr 30 08:41:09 EDT
2007 Latest ChangeSet: Sun Apr 29 09:39:33 2007 +0100
14993:bf96999a2ffd
(XEN) Command line:
/xen.gz com1=115200,8n1 (XEN) 0000000000000000 - 00000000000a0000
(usable) (XEN) 00000000000f0000 - 0000000000100000
(reserved) (XEN) 0000000000100000 - 000000007e000000
(usable) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN)
System RAM: 2015MB (2064000kB) (XEN) ACPI: Unable to locate RSDP (XEN) Xen
heap: 9MB (10228kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN)
PAE enabled, limit: 16 GB (XEN) Processor #0 15:2 APIC version 17 (XEN)
Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using
scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2388.354 MHz
processor. (XEN) CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09 (XEN)
Mapping cpu 0 to node 255 (XEN) Total of 1 processors activated. (XEN)
ExtINT not setup in hardware but reported by MP table (XEN) ENABLING IO-APIC
IRQs (XEN) -> Using new ACK method (XEN) Platform timer is
1.193MHz PIT (XEN) Brought up 1 CPUs (XEN) *** LOADING DOMAIN 0
*** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0
kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc044553c (XEN) PHYSICAL
MEMORY ARRANGEMENT: (XEN) Dom0 alloc.:
000000007c000000->000000007d000000 (473549 pages to be allocated) (XEN)
VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel:
c0100000->c044553c (XEN) Init. ramdisk:
c0446000->c0c87000 (XEN) Phys-Mach map:
c0c87000->c0e59734 (XEN) Start info:
c0e5a000->c0e5a46c (XEN) Page tables:
c0e5b000->c0e68000 (XEN) Boot stack:
c0e68000->c0e69000 (XEN)
TOTAL:
c0000000->c1000000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has
maximum 1 VCPUs (XEN) Initrd len 0x841000, start at 0xc0446000 (XEN)
Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std.
Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited:
Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) ***
Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
[root@vps auto]# xm
info host
:
vps.ispbrasil.com.br release
:
2.6.18-xen version
: #1 SMP Sun Apr 29 21:43:24 EDT
2007 machine
:
i686 nr_cpus
:
1 nr_nodes
: 1 sockets_per_node :
1 cores_per_socket :
1 threads_per_core :
1 cpu_mhz
:
2388 hw_caps
:
00000000:bfebfbff:00000000:00000000:00000080:00004400 total_memory
:
534763 free_memory
:
0 xen_major
:
3 xen_minor
:
0 xen_extra
:
.5-rc4 xen_caps
:
xen-3.0-x86_32p xen_pagesize
: 4096 platform_params :
virt_start=0xf5800000 xen_changeset
: Sun Apr 29 09:39:33 2007 +0100
14993:bf96999a2ffd cc_compiler
: gcc version 4.1.2 20070424 (Red Hat
4.1.2-11) cc_compile_by
: root cc_compile_domain :
ispbrasil.com.br cc_compile_date :
Mon Apr 30 08:41:09 EDT 2007 xend_config_format :
3
--------------------
Itamar Reis Peixoto
----- Original Message -----
Sent: Monday, April 30, 2007 12:49 PM
Subject: Re: [Xen-users] error creating domain in
xen 3.0.5
> Hi, > > Xen seems to think you don't have much memory
free, even though you should do. > > Please post the output of xm
dmesg and xm info. > > Cheers, > Mark > > On
Monday 30 April 2007, Itamar Reis Peixoto wrote: >> I have 2 gb of
memory on this machine, and in my domU config I have set >>
mem=32 >> >> [root@vps auto]# pwd >>
/etc/xen/auto >> >> [root@vps auto]# xm list >>
Name
ID Mem VCPUs State >>
Time(s)
Domain-0
0 256 1
r----- >> 98.9 [root@vps auto]# xm mem-set 0
32 >> >> [root@vps auto]# xm list >>
Name
ID Mem VCPUs State >>
Time(s)
Domain-0
0 32 1
r----- >> 101.4 >> >> [root@vps
auto]# xm create ispbrasil >> Using config file
"./ispbrasil". >> Error: I need 32768 KiB, but dom0_min_mem is 200704
and shrinking to 200704 >> KiB would leave only -167936 KiB free.
[root@vps auto]# >> >> >> >>
-------------------- >> >> Itamar Reis
Peixoto >> >> e-mail: itamar@xxxxxxxxxxxxxxxx >>
msn: itamarjp@xxxxxxxxxxxxx >>
skype: itamarjp >> icq: 81053601 >> +55 34 3238
3845 >> +55 11 4063 5033 >> ----- Original Message
----- >> From: "Petersson, Mats" <Mats.Petersson@xxxxxxx> >>
To: "Itamar Reis Peixoto" <itamar@xxxxxxxxxxxxxxxx>; >> <xen-users@xxxxxxxxxxxxxxxxxxx> Cc:
<xen-devel@xxxxxxxxxxxxxxxxxxx> >> Sent: Monday, April 30, 2007 12:30 PM >>
Subject: RE: [Xen-users] error creating domain in xen
3.0.5 >> >> > -----Original Message----- >> >
From: Itamar Reis Peixoto [mailto:itamar@xxxxxxxxxxxxxxxx] >> >
Sent: 30 April 2007 15:21 >> > To: Petersson, Mats; xen-users@xxxxxxxxxxxxxxxxxxx >> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx >> > Subject: Re: [Xen-users] error creating domain in xen
3.0.5 >> > >> > I am using 3.0.5 RC4 >>
> >> >
total_memory :
530810 >> >
free_memory :
0 >> >> So, it looks like you've got 256MB given to Dom0 and
abouot 512MB of RAM >> total in the machine. >> >> I
think you may have problems fitting a 256MB Dom0, Xen Hypevisor and
a >> 256MB guest in 512MB. Perhaps you can reduce the Dom0 memory by
some >> 20-30MB and get it to fit? >> >>
-- >> Mats >> >> >
-------------------- >> > >> > Itamar Reis
Peixoto >> > >> > e-mail: itamar@xxxxxxxxxxxxxxxx <mailto:itamar@xxxxxxxxxxxxxxxx> >> > msn: itamarjp@xxxxxxxxxxxxx <mailto:itamarjp@xxxxxxxxxxxxx> >> > skype: itamarjp >> > icq:
81053601 >> > +55 34 3238 3845 >> > +55 11 4063
5033 >> > ----- Original Message ----- >> > From:
"Petersson, Mats" <Mats.Petersson@xxxxxxx >> > <mailto:Mats.Petersson@xxxxxxx> > >> > To: "Itamar Reis Peixoto" <itamar@xxxxxxxxxxxxxxxx >>
> <mailto:itamar@xxxxxxxxxxxxxxxx>
>; >> > <xen-users@xxxxxxxxxxxxxxxxxxx >> > <mailto:xen-users@xxxxxxxxxxxxxxxxxxx> > >> > Cc: <xen-devel@xxxxxxxxxxxxxxxxxxx >> > <mailto:xen-devel@xxxxxxxxxxxxxxxxxxx> > >> > Sent: Monday, April 30, 2007 11:54
AM >> > Subject: RE: [Xen-users] error creating domain in xen
3.0.5 >> > >> > > -----Original
Message----- >> > > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx >> > >> > <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx> >> > >> > >
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of >> >
> Itamar Reis Peixoto >> > > Sent: 30 April 2007
14:36 >> > > To: xen-users@xxxxxxxxxxxxxxxxxxx >> > >> > <mailto:xen-users@xxxxxxxxxxxxxxxxxxx> >> > >> > > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx >> > >> > <mailto:xen-devel@xxxxxxxxxxxxxxxxxxx> >> > >> > > Subject: [Xen-users] error
creating domain in xen 3.0.5 >> > > >> > > anyone
can help-me ? >> > > >> > > I am using fedora
devel (6.92) >> > >> > What version of Xen is that
with? >> > >> > Daniel Berrange submitted a patch that
is in 3.0.5-RC4 to fix >> > a problem >> > with
auto-balloning of Dom0. That fixes a problem that is very similar >>
> to yours (if not the same). >> > >> > The
workaround is to assign a fixed amount of memory to Dom0 with >> >
"dom0_mem=xxx" on the xen.gz boot line in your boot config file. >>
> >> > <snip big log> >> > >> >
> [2007-04-30 09:27:00 xend.XendDomainInfo 5143] DEBUG >> > >
(XendDomainInfo:1330) XendDomainInfo.initDomain: 8 256 >> > >
[2007-04-30 09:27:00 xend 5143] DEBUG (balloon:133) Balloon: >> >
> 0 KiB free; 0 to scrub; need 262144; retries: 20. >> > >
[2007-04-30 09:27:21 xend.XendDomainInfo 5143] ERROR >> > >
(XendDomainInfo:397) VM start failed >> > > Traceback (most
recent call last): >> > > File >> > >
"/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", >> >
> line 385, in start >> > >
self._initDomain() >> > > File >> > >
"/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", >> >
> line 1375, in _initDomain >> >
> balloon.free(memory + shadow) >> >
> File >> > >
"/usr/lib/python2.5/site-packages/xen/xend/balloon.py", line >> >
> 170, in free >> > > free_mem +
scrub_mem + dom0_alloc - dom0_min_mem)) >> > > VmError: I need
262144 KiB, but dom0_min_mem is 200704 and >> > >> >
<snip another copy of same error message> >> > >>
> -- >> > Mats >> > >> > >>
> >> >
_______________________________________________ >> > Xen-users
mailing list >> > Xen-users@xxxxxxxxxxxxxxxxxxx
<mailto:Xen-users@xxxxxxxxxxxxxxxxxxx> >> > http://lists.xensource.com/xen-users >> > <http://lists.xensource.com/xen-users> >> >>
_______________________________________________ >> Xen-users mailing
list >> Xen-users@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/xen-users > > > > -- > Dave: Just a
question. What use is a unicyle with no seat? And no pedals! > Mark:
To answer a question with a question: What use is a skateboard? > Dave:
Skateboards have wheels. > Mark: My wheel has a wheel! > >
_______________________________________________ > Xen-users mailing
list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|