WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 		  
Home Products Support Community News
 
   
 

xen-users

[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Xen-users] Need help setting up guest's networking - update

from [Yevgeniy Goldberg] [Permanent Link][Original]
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Need help setting up guest's networking - update
From: Yevgeniy Goldberg <thegoldberg@xxxxxxx>
Date: Sat, 28 Apr 2007 19:55:44 -0500
Delivery-date: Sat, 28 Apr 2007 17:54:32 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <1471A02D-0112-1000-B1B2-E7FA10FB211D-Webmail-10019@xxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <1471A02D-0112-1000-B1B2-E7FA10FB211D-Webmail-10019@xxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
Just a quick update -
The windows 2003 server networking is now working.
Not sure what have changed.
The Suse guest still does not have a network.

-Eugene.


On Apr 28, 2007, at 5:47 PM, YEVGENIY GOLDBERG wrote:


Greetings!
I finally got the install done for a couple of gust OSs (Win 2003 server & Suse Enterprise 10) 
Bothe gusts are up and running, but - no networking.

My setup:
Hardware - AMD Athlon 4200+, ABIT Motherboard, 4 GB of DDR2 RAM, 2 onboard GB NICs 
Host OS- Suse Linux Enterprise server 10
Xen - 3.0.2_09749-0.4

Config file for Win 2003 server guest:

#  -*- mode: python; -*-
#===================================================================== ======= 
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm create'. 
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#===================================================================== ======= 

import os, re
arch = os.uname()[4]
if re.search('64', arch):
    arch_libdir = 'lib64'
else:
    arch_libdir = 'lib'
#--------------------------------------------------------------------- ------- 
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"

# The domain build function. HVM domain uses 'hvm'.
builder='hvm'

# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
# memory errors. The domain needs enough memory to boot kernel 
#          and modules. Allocating less than 32MBs is not recommended.
memory = 512

# Shadow pagetable memory for the domain, in MB.
# Should be at least 2KB per MB of domain memory, plus a few MB per vcpu. 
shadow_memory = 8

# A name for your domain. All domains must have different names.
name = "win2003server"
# 128-bit UUID for the domain. The default behavior is to generate a new UUID 
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"
#--------------------------------------------------------------------- -------- 
# the number of cpus guest platform has, default=1
#vcpus=1

# enable/disable HVM guest PAE, default=0 (disabled)
#pae=0

# enable/disable HVM guest ACPI, default=0 (disabled)
#acpi=0

# enable/disable HVM guest APIC, default=0 (disabled)
#apic=0

# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = ""         # leave to Xen to pick
#cpus = "0"        # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5

# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0' ]
# type=ioemu specify the NIC is an ioemu device not netfront
#vif = [ 'type=ioemu, bridge=xenbr0' ]
#--------------------------------------------------------------------- ------- 
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see, 
# and MODE is r for read-only, w for read-write.

#disk = [ 'phy:hda1,hda1,r' ]
disk = [ 'file:/var/lib/xen/images/windisk.img,ioemu:hda,w', 'phy:/ dev/hda,hdb,r' ] 
cdrom="/media/disk/iso/win2003server.iso"
#--------------------------------------------------------------------- ------- # Configure the behaviour when a domain exits. There are three 'reasons' # for a domain to stop: poweroff, reboot, and crash. For each of these you 
# may specify:
#
#   "destroy",        meaning that the domain is cleaned up as normal;
# "restart", meaning that a new domain is started in place of the old 
#                     one;
# "preserve", meaning that no clean-up is done until the domain is # manually destroyed (using xm destroy, for example); or # "rename-restart", meaning that the old domain is not cleaned up, but is 
#                     renamed and a new domain started in its place.
#
# The default is
#
on_poweroff = 'destroy'
on_reboot   = 'destroy'
on_crash    = 'destroy'
#
# For backwards compatibility we also support the deprecated option restart 
#
# restart = 'onreboot' means on_poweroff = 'destroy'
#                            on_reboot   = 'restart'
#                            on_crash    = 'destroy'
#
# restart = 'always'   means on_poweroff = 'restart'
#                            on_reboot   = 'restart'
#                            on_crash    = 'restart'
#
# restart = 'never'    means on_poweroff = 'destroy'
#                            on_reboot   = 'destroy'
#                            on_crash    = 'destroy'

#on_poweroff = 'destroy'
#on_reboot   = 'restart'
#on_crash    = 'restart'
#===================================================================== ======= 

# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
#--------------------------------------------------------------------- -------- 
# boot on floppy (a), hard disk (c) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot="c"
#--------------------------------------------------------------------- -------- 
#  write to temporary files instead of disk image files
#snapshot=1
#--------------------------------------------------------------------- ------- 
# enable SDL library for graphics, default = 0
sdl=1
#--------------------------------------------------------------------- ------- 
# enable VNC library for graphics, default = 1
vnc=0
#--------------------------------------------------------------------- ------- 
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten="127.0.0.1"
#--------------------------------------------------------------------- ------- 
# set VNC display number, default = domid
#vncdisplay=1
#--------------------------------------------------------------------- ------- 
# try to find an unused port for the VNC server, default = 1
#vncunused=1
#--------------------------------------------------------------------- ------- 
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0
vncviewer=0
#--------------------------------------------------------------------- ------- 
# no graphics, use serial port
#nographic=0
#--------------------------------------------------------------------- ------- 
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0
#--------------------------------------------------------------------- -------- 
#   serial port re-direct to pty deivce, /dev/pts/n
#   then xm console or minicom can connect
serial='pty'
#--------------------------------------------------------------------- -------- 
#   enable sound card support, [sb16|es1370|all|..,..], default none
#soundhw='sb16'
#--------------------------------------------------------------------- -------- 
#    set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1
#--------------------------------------------------------------------- -------- 
#    start in full screen
#full-screen=1
#--------------------------------------------------------------------- -------- # Enable USB support (specific devices specified at runtime through the 
#                       monitor window)
#usb=1
# Enable USB mouse support (only enable one of the following, `mouse' for # PS/2 protocol relative mouse, `tablet' for 
#                             absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'



Config file for Suse Linux Enterprise 10 guest:
disk = [ 'file:/var/lib/xen/images/OraDb1/hda,hda,w', 'phy:/dev/ hda,hdb,r' ] 
memory = 1024
vcpus = 2
builder = 'linux'
name = 'OraDb1'
vif = [ 'mac=00:16:3e:f3:64:e9','bridge=xenbr0']
localtime = 0
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
extra = ' TERM=xterm'
bootloader = '/usr/lib/xen/boot/domUloader.py'
bootentry = 'hda2:/boot/vmlinuz-xen,/boot/initrd-xen'
boot="c"



out put of brctl show:

bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.feae66791813       no              vif0.0
                                                        peth0
                                                        vif2.1
                                                        vif2.0
                                                        tun0
                                                        vif3.0


Output of ifconfig on the host:


eth0      Link encap:Ethernet  HWaddr 00:50:8D:94:71:4A
inet addr:67.184.153.5 Bcast:255.255.255.255 Mask: 255.255.248.0 
          inet6 addr: fe80::250:8dff:fe94:714a/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 
          RX packets:172324 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1904 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12503150 (11.9 Mb)  TX bytes:371462 (362.7 Kb)

eth1      Link encap:Ethernet  HWaddr 00:50:8D:94:71:4B
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:5 Base address:0xa000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:502 errors:0 dropped:0 overruns:0 frame:0
          TX packets:502 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:49132 (47.9 Kb)  TX bytes:49132 (47.9 Kb)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:172405 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1953 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:12507544 (11.9 Mb)  TX bytes:377357 (368.5 Kb)
          Interrupt:11 Base address:0x4000

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

tun0      Link encap:Ethernet  HWaddr FE:AE:66:79:18:13
          inet6 addr: fe80::fcae:66ff:fe79:1813/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:31 errors:0 dropped:0 overruns:0 frame:0
          TX packets:843 errors:0 dropped:0 overruns:2 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:4101 (4.0 Kb)  TX bytes:52246 (51.0 Kb)

veth1     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth2     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth3     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth4     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth5     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth6     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth7     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:1904 errors:0 dropped:0 overruns:0 frame:0
          TX packets:172324 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:371462 (362.7 Kb)  TX bytes:12503150 (11.9 Mb)

vif0.1    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.2    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.3    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.4    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.5    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.6    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.7    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif2.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:148584 errors:0 dropped:1800 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:468 (468.0 b)  TX bytes:9013081 (8.5 Mb)

vif2.1    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:150390 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif3.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:861 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

xenbr0    Link encap:Ethernet  HWaddr FE:AE:66:79:18:13
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:170009 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7939155 (7.5 Mb)  TX bytes:0 (0.0 b)
I'll be happy to provide any other information to help identify the issue. 

Best regards,

-Eugene


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Xen-users] Error: Device 2049 (vbd) could not be connected. Hotplug scripts not working., Error: Device 0 (vif) could not be connected. Hotplug scripts not working., Josef
Next by Date:  Re: [Xen-users] Need help setting up guest's networking, Nico Kadel-Garcia
Previous by Thread:  [Xen-users] Need help setting up guest's networking, YEVGENIY GOLDBERG
Next by Thread:  Re: [Xen-users] Need help setting up guest's networking, Nico Kadel-Garcia
Indexes:  [Date] [Thread] [Top] [All Lists]
 
   

Copyright , Citrix Systems Inc. All rights reserved. Legal and Privacy