Re: [Xen-users] Dom0 network problem.

[Batuhan Osmanoglu <batuhan.osmanoglu@xxxxxxxxx>]

Hi Nico,

Thanks for the suggestion. I managed to solve the problem on Dom0 by 
disabling the management software implemented in the NIC's flash. It was 
quite hard to track down the error and there is more written about it on 
http://lists.xensource.com/archives/html/xen-users/2006-11/msg00822.html.
In order to disable the IPMI management (following the instructions on 
http://mywiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround ) 
one needs to download the Broadcom NetXtreme dos Utilities and a dos 
boot disk. Once booted you need to issue
uxdiag -ver

to see the status of the cards and you can turn on and off the IPMI using the mfw flag. Hope this helps other 
people as well.
Cheers,

Batu.

Nico Kadel-Garcia wrote:
> bosmanoglu@xxxxxxxxxxxxxxx wrote:
> > Hi all,
> >
> >  I am trying to setup Xen on a Dell PowerEdge 2950 system with 2 Xeon 
> > Quad
> > core processors under SuSE Enterprise. I did the Xen installation 
> > through
> > Yast and I managed to get images of ttylinux and chaos to boot.
> >
> >  My problem is, when I use netwotk-bridge, Dom0 does not have internet
> > connection. I also tried network-routed without success.
> >
> >  Please let me know if you have any suggestions.
> >
> > Cheers,
> >
> > Batu.
> >   
> I bet it's your iptables. Turn off iptables and try it, then take a 
> look at some previous threads about how to configure this.
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users