Re: [Xen-users] Initial networking not working

[Cam Macdonell <cam@xxxxxxxxxxxxxx>]

Since I can't get the network install working I can't reboot.  I added 
vifnum=1 to the network-bridge line in xend-config.sxp.
(network-script 'network-bridge netdev=eth1 vifnum=1')

However, when I look at the Details of the VM when it's started, the 
dialog says the network is xenbr1 and device is eth0.
Is there anything else I can try?

Thanks for your help thus far,

Cam

Apparao, Padmashree K wrote:
> Try this
>
> /etc/xen/scripts/network-bridge vifnum=1 start
> And restart your guest VM
>
> - Padma
>
>
> -----Original Message-----
> From: Cam Macdonell [mailto:cam@xxxxxxxxxxxxxx] 
> Sent: Tuesday, April 03, 2007 3:52 PM
> To: Apparao, Padmashree K; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-users] Initial networking not working
>
> Apparao, Padmashree K wrote:
> > Can you tell us what the vifnum is set to in the config file for the
> > guest VM
> vifnum is not set in the VM config file.  I guess that means it is using
>
> the default of 0.  Should it be set to 1 or do that matter.  Please let 
> me know if other information would be helpful.
> Here is the VM config file:
>
> # Automatically generated xen config file
> name = "xenby2"
> memory = "1024"
> disk = [ 'tap:aio:/usr/scratch/xenby/xendisk2,xvda,w', ]
> vif = [ 'mac=00:16:3e:71:78:65, bridge=xenbr1', ]
> vnc=1
> vncunused=1
> uuid = "c6e09f72-1009-75a4-a26c-8ad48b626aa5"
> bootloader="/usr/bin/pygrub"
> vcpus=2
> on_reboot   = 'restart'
> on_crash    = 'restart'
>
>
> Thanks,
> Cam
>
>
> > Thanks
> > - Padma
> >
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Cam
> > Macdonell
> > Sent: Tuesday, April 03, 2007 1:25 PM
> > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: [Xen-users] Initial networking not working
> >
> >
> > Hi,
> >
> > I am trying to install FC6 under Xen on a cluster node whose ethernet 
> > card uses interface eth1.  I modified the xend-config to use eth1
> > (network-script 'network-bridge netdev=eth1')
> >
> > The installer boots and starts running.  But the installer still
> cannot 
> > connect to the http server that has the FC6 installation on it.  So 
> > there seems to be no networking within the Xen VM.
> > Here is the output from brctl:
> >
> > bridge name     bridge id               STP enabled     interfaces
> > xenbr1          8000.feffffffffff       no              vif1.0
> >                                                          peth1
> >                                                          vif0.1
> >
> > I realize this is a complete noob question, but any help is
> appreciated.
> > Thanks,
> > Cam
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users