Re: [Xen-users] eth0 / device problem in dom0

[Yves-gaël Chény <yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx>]

what's your eth0 is in a lspci ?

regards
yves

phcolaris a écrit :
> hi all,
>
> I've got the stable xen 3.0.4-1 with the 2.6.16.33 kernel
> complied without problems, but in boot I can see this and it doesn't
> bring up the eth0
>
> so I guess I'm missing something in the kernel? the e1000 driver is the
> one I need for the network card.
>
> thanks for any hint
>
> rgds
> phil
>
>
> Start Unicode mode
> done
> Loading console font lat9w-16.psfu  -m trivial G0:loadable
> done
> BLKTAPCTRL[3859]: blktapctrl: v1.0.0
>
> BLKTAPCTRL[3859]: Found driver: [raw image (aio)]
>
> BLKTAPCTRL[3859]: Found driver: [raw image (sync)]
>
> BLKTAPCTRL[3859]: Found driver: [vmware image (vmdk)]
>
> BLKTAPCTRL[3859]: Found driver: [ramdisk image (ram)]
>
> BLKTAPCTRL[3859]: Found driver: [qcow disk (qcow)]
>
> BLKTAPCTRL[3859]: /dev/xen/blktap0 device already exists
>
> device vif0.0 entered promiscuous mode
> xenbr0: port 1(vif0.0) entering learning state
> xenbr0: topology change detected, propagating
> xenbr0: port 1(vif0.0) entering forwarding state
> e1000: peth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
> device peth0 entered promiscuous mode
> xenbr0: port 2(peth0) entering learning state
> xenbr0: topology change detected, propagating
> xenbr0: port 2(peth0) entering forwarding state
> Setting up network interfaces:
>     lo        
>     lo        IP address: 127.0.0.1/8
> done
>     eth0      
>               No configuration found for eth0
> unused
>     veth0     
>               No configuration found for veth0
> unused
>     veth1     
>               No configuration found for veth1
> unused
>     veth2     
>               No configuration found for veth2
> unused
>     veth3     
>               No configuration found for veth3
> unused
>     vif0.0    
>               No configuration found for vif0.0
> unused
>     vif0.1    
>               No configuration found for vif0.1
> unused
>     vif0.2    
>               No configuration found for vif0.2
> unused
>     vif0.3    
>               No configuration found for vif0.3
> unused
> Waiting for mandatory devices:  eth-bus-pci-0000:00:04.0 __NSC__
> 18 17 16 15 14 13 12 11 10 9 8 6 5 4 3 2 1 0 
>     peth0     
>               No configuration found for peth0
> failed
>     peth0     interface could not be set up until now
> failed
> Setting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .
> failed
>
>
>                 
> ___________________________________________________________ 
> All New Yahoo! Mail – Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. http://uk.docs.yahoo.com/nowyoucan.html
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>   
--
Yves-Gaël Chény
Responsable développements techniques
Responsable Achats techniques
Responsable RH technique

261 route de Clisson 44230 St Sébastien sur Loire
Tel : 02 40 97 62 67 - 08 73 77 24 91
http://www.tranquilitsystems.com/
yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx

Tranquil IT Systems . SAS 37 000 ¤

yves-gael.cheny.vcf
Description: Vcard

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users