|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] booting an ISO inside Xen (full virt)
Hi Yves,
yes, i tryed this, i can connect to the vnc w/o pass, so i still have a black
window.
About SDL i have installed libsdl (before xen) but i dont have any "pop up
window" when i create the domu. And the domu stay in state "unknow". with vnc
almost it goes to running state.
thanks both, more clues?
----- Original Message -----
From: Yves-gaël Chény <yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx>
To: jasuarez@xxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
Sent: martes 13 de marzo de 2007 14H16 GMT+0100 Europe/Berlin
Subject: Re: [Xen-users] booting an ISO inside Xen (full virt)
Perhaps it's in your xend_config.sxp
# The interface for VNC servers to listen on. Defaults
# to 127.0.0.1 To restore old 'listen everywhere' behaviour
# set this to 0.0.0.0
(vnc-listen '0.0.0.0')
# The default password for VNC console on HVM domain.
# Empty string is no authentication.
(vncpasswd '')
regards
yves
José Alberto Suárez López a écrit :
> Not iptables, so it is stragne, i added the option:
>
> vnclisten="192.168.100.3"
>
> to iso.cfg and no i can connect to the vnc form my desktop :)
>
> vncviewer:61 or vncviewer::5961
>
> The conneciton opens, so i only have a "blank" (black) vnc window.
> We are near my friends... :P
>
> any clue?
>
>
> so how can i use sdl? just sdl=1 and then xm console domid?
>
> regards and thanks both
>
>
> ----- Original Message -----
> From: Jerry Amundson <jamundso@xxxxxxxxx>
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Sent: martes 13 de marzo de 2007 13H44 GMT+0100 Europe/Berlin
> Subject: Re: [Xen-users] booting an ISO inside Xen (full virt)
>
> On 3/13/07, Petersson, Mats <Mats.Petersson@xxxxxxx> wrote:
>
>>> peggy ~ # netstat -tuna | grep 59
>>> tcp 0 0 127.0.0.1:5954 0.0.0.0:*
>>> LISTEN
>>>
>>> peggy ~ # vncviewer 127.0.0.1:5954
>>> vncviewer: ConnectToTcpAddr: connect: Connection refused
>>> Unable to connect to VNC server
>>>
>
> iptables?
>
> jerry
>
>
--
Yves-Gaël Chény
Responsable développements techniques
Responsable Achats techniques
Responsable RH technique
261 route de Clisson 44230 St Sébastien sur Loire
Tel : 02 40 97 62 67 - 08 73 77 24 91
http://www.tranquilitsystems.com/
yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx
Tranquil IT Systems . SAS 37 000 ¤
--
José Alberto Suárez López
Técnico I+D / Administrador
Eneo Tecnología S.L.
<www.eneotecnologia.com>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- RE: [Xen-users] booting an ISO inside Xen (full virt), (continued)
- RE: [Xen-users] booting an ISO inside Xen (full virt), Petersson, Mats
- Re: [Xen-users] booting an ISO inside Xen (full virt), José Alberto Suárez López
- RE: [Xen-users] booting an ISO inside Xen (full virt), Petersson, Mats
- Re: [Xen-users] booting an ISO inside Xen (full virt), Jerry Amundson
- Re: [Xen-users] booting an ISO inside Xen (full virt), José Alberto Suárez López
- RE: [Xen-users] booting an ISO inside Xen (full virt), Petersson, Mats
- Re: [Xen-users] booting an ISO inside Xen (full virt), José Alberto Suárez López
- Re: [Xen-users] booting an ISO inside Xen (full virt), Mark Williamson
- Re: [Xen-users] booting an ISO inside Xen (full virt), José Alberto Suárez López
- Re: [Xen-users] booting an ISO inside Xen (full virt), Yves-gaël Chény
- Re: [Xen-users] booting an ISO inside Xen (full virt),
José Alberto Suárez López <=
|
|
|
|
|