Hi, I've a problem: I've the same config file, xen 3.0.3 installed from
source.
I can start windows in a domU but I can't see it with graphic.
If I type "xm list" I can see it in the list and the time is not 0 (i think
that a number that is not 0 it's ok... isn't it?).
if I start it with qemu it work fine but without network (in the hardware
list thereis a network card).
Here I posted a log of qemu-dm:
domid: 5
qemu: the number of cpus is 1
shared page at pfn:1ffff, mfn: 1c10f
buffered io page at pfn:1fffd, mfn: 1c111
False I/O request ... in-service already: 0, pvalid: 0, port: 0, data: 0,
count:
0, size: 0
And my config file is:
kernel = "/usr/lib/xen/boot/hvmloader"
builder = 'hvm'
memory = 512
name = "winxp"
vcpus = 1
vif = [ '' ]
disk = [ 'file:/vserver/images/winxp.img,ioemu:hda,w' ]
device_model = '/usr/lib/xen/bin/qemu-dm'
cdrom='/dev/hdd'
ne2000=0
boot='c'
I've installed Windows with qemu but also if I try to install it with xen
and a blank image file, it doesn't boot...
If compiled the kernel with TUN/TAP module, any support for graphic card ad
IDE/SATA controller (they work fine).
Any suggestion?
CPU is Athlon 3800+ X2 with AMD-V, MB is ASUS M2V.
Thanks
--------- Original Message --------
From: Gerhard Possler <gerhard.possler@xxxxxxxxxx>
To: Benny Pfitzner <pfitzner-lug@xxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Problem with WinXP install. Can start but
not connect via vnc
Date: 21/12/06 12:23
>
> Hi Benny,
>
> i'm not sure that vnc ist working with
> hvm (MS) you do not have in an standard installation an vncserver... but
> can you ping your guest?
>
> (vnc would run with an Linux hvm guest
> because you have here in many OS's an vncserver allready as default)
>
> you should connect to the guest and
> not to localhost. I use RDP to connect to my XP session, from Linux
someting
> like:
>
> rdesktop -g 1200x1024 -a 24 -k de 10.0.0.2
>
> 10.0.0.2 is my XP guest.
>
> Gerhard
>
> xen-users-bounces@xxxxxxxxxxxxxxxxxxx wrote on 20.12.2006
> 18:44:53:
>
> > Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb Petersson, Mats:
> >
> > Hello,
> >
> > I started the domain again with <boot='c'> and a I saw a lot
> of I/O
> > access. But I still don't know how to connect via vnc.
> >
> > Here is my most recent qemu-log:
> > ****************************************
> > domid: 8
> > qemu: the number of cpus is 1
> > shared page at pfn:bfff, mfn: 2172b
> > buffered io page at pfn:bffd, mfn: 2172d
> > False I/O request ... in-service already: 0, pvalid: 0, port: 0,
data:
> > 0, count: 0, size: 0
> > ****************************************
> >
> > And here you can find the last couple of lines in my xend.log-file:
> > http://pastebin.ca/286417
> >
> > I have a qemu running:
> > ****************************
> > pfitzner:/var/log/xen# lsof -i|grep qemu
> > qemu-dm 14352 root 8u
> IPv4 26087 TCP
> > localhost.localdomain:5900 (LISTEN)
> > pfitzner:/var/log/xen# vncviewer localhost:5900
> > vncviewer: ConnectToTcpAddr: connect: Connection refused
> > Unable to connect to VNC server
> > ****************************
> >
> >
> > Thank you guys very much.
> >
> > Ben
> >
> > >
> > > > -----Original Message-----
> > > > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > > > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf
> Of
> > > > Benny Pfitzner
> > > > Sent: 20 December 2006 17:15
> > > > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Subject: Re: [Xen-users] Problem with WinXP install. Can
>
> > > > start but not connect via vnc
> > > >
> > > > Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan
Worsley:
> > > > > Hi Benny,
> > > > >
> > > > > Benny Pfitzner wrote:
> > > > > > Hi,
> > > > > >
> > > > > > I run debian etch with xen packages provided by
> debian.
> > > > They are running
> > > > > > fine.
> > > > > > Today I tryed to install Windows XP. Here is my
> config:
> > > > > > ***********************************************
> > > > > > kernel =
"/usr/lib/xen-3.0.3-1/boot/hvmloader"
> > > > > > builder = 'hvm'
> > > > > > memory = 512
> > > > > > name = "winxp"
> > > > > > vcpus = 1
> > > > > > vif = [ 'type=ioemu, bridge=xenbr0' ]
> > > > > > disk = [
> > > > 'file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'
> ]
> > > > > > device_model = '/usr/lib/xen/bin/qemu-dm'
> > > > > > #cdrom='/dev/hda'
> > > > > > cdrom='/vserver/images/domains/winxp/winxp.iso'
> > > > > >
> > > > > The cdrom= lines had no effect for me, I think they're
>
> > > > obsolete now or
> > > > > something, instead I have a disk line that looks like
> this;
> > > > >
> > > > > disk = [ 'phy:/dev/sys_vg/windows_os,ioemu:hda,w',
>
> > > > >
'file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'
> ]
> > > >
> > > > Thank you very much Ryan,
> > > >
> > > > you are totally right. They changed it in version 3.0.3.
> > > >
> > > > I added vncviewer=1 and sdl=1 to my configfile and started
> the domain
> > > > again.
> > > >
> > > > Then I automatically I got vncviewer running my WinXP
install
> screen.
> > > > After formatting the image and so on Windows want's to
reboot.
> > > >
> > > > Since then I don't have connection to the domain.
> > > >
> > > > I posted my netstat -l output here because I just can't
> find the port:
> > > > http://pastebin.ca/raw/286397
> > > >
> > > > My logs don't show anything regarding vnc.
> > > > Here is the output of the most recent qemu-log:
> > > > *************************************************
> > > > domid: 7
> > > > qemu: the number of cpus is 1
> > > > shared page at pfn:1ffff, mfn: 1d24b
> > > > buffered io page at pfn:1fffd, mfn: 1d24d
> > > > *************************************************
> > > >
> > > > Here I posted the last couple of lines from the xend.log
> file.
> > > > http://pastebin.ca/286403
> > >
> > > I bet you don't have a qemu-dm process for some reason... Try
> starting
> > > the domain from scratch (booting from the hard-disk, not CD-ROM
> this
> > > time).
> > >
> > > If starting it again doesn't work, can you show the qemu-log
> from the
> > > new vm?
> > >
> > > --
> > > Mats
> > > >
> > > >
> > > > Thanks Ben
> > > >
> > > > >
> > > > > > ne2000=0
> > > > > > boot='d'
> > > > > > vif = [ 'ip=192.168.0.205' ]
> > > > > > vnc=1
> > > > > > vncviewer=0
> > > > > >
> > > > > Do you not have to set vncviewer to 1 to get it create
> the
> > > > window for
> > > > > you? I personally used SDL instead (sdl=1).
You
> also say
> > > > your domain
> > > > > is 17, I think when I experimented with VNC I found
> it to
> > > > create the
> > > > > listening port on something like 4017 or whatever.
> I used
> > > > netstat -l to
> > > > > find out what port it was actually on.
> > > > >
> > > > > Ben, lastly, could you check your /var/log/xen folder
> for error
> > > > > messages, specifically check the most recent qemu log.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Ryan.
> > > > > > ***********************************************
> > > > > >
> > > > > > When I try to start the domain it seems to run
> fine:
> > > > > > ***********************************************
> > > > > > pfitzner:/etc/xen# xm create winxp2
> > > > > > Using config file "winxp2".
> > > > > > Started domain winxp
> > > > > > ***********************************************
> > > > > >
> > > > > > But when I try to connect to the domain via vnc
> I get the
> > > > message that
> > > > > > the viewer can't connect:
> > > > > > ***********************************************
> > > > > > pfitzner:/vserver/images/domains# vncviewer
pfitzner:17
> > > > > > vncviewer: ConnectToTcpAddr: connect: Connection
> refused
> > > > > > Unable to connect to VNC server
> > > > > > ***********************************************
> > > > > >
> > > > > > P.S.:
> > > > > > 17 is the ID of the domain and I have a Intel
> Pentuim D with VT:
> > > > > > pfitzner:/vserver/images/domains# xm dmesg | grep
> VMX
> > > > > > (XEN) VMXON is done
> > > > > > (XEN) VMXON is done
> > > > > >
> > > > > >
> > > > > > Does somebody might have a idea what I did do
> wrong?
> > > > > >
> > > > > > Tanks Ben
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Xen-users mailing list
> > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > http://lists.xensource.com/xen-users
> > > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Xen-users mailing list
> > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > http://lists.xensource.com/xen-users
> > > >
> > > >
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > http://lists.xensource.com/xen-users
> > > >
> > > >
> > > >
> > >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
________________________________________________
Message sent using UebiMiau 2.7.10
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home