Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb Petersson, Mats:
Hello,
I started the domain again with <boot='c'> and a I saw a lot of I/O
access. But I still don't know how to connect via vnc.
Here is my most recent qemu-log:
****************************************
domid: 8
qemu: the number of cpus is 1
shared page at pfn:bfff, mfn: 2172b
buffered io page at pfn:bffd, mfn: 2172d
False I/O request ... in-service already: 0, pvalid: 0, port: 0, data:
0, count: 0, size: 0
****************************************
And here you can find the last couple of lines in my xend.log-file:
http://pastebin.ca/286417
I have a qemu running:
****************************
pfitzner:/var/log/xen# lsof -i|grep qemu
qemu-dm 14352 root 8u IPv4 26087 TCP
localhost.localdomain:5900 (LISTEN)
pfitzner:/var/log/xen# vncviewer localhost:5900
vncviewer: ConnectToTcpAddr: connect: Connection refused
Unable to connect to VNC server
****************************
Thank you guys very much.
Ben
>
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> > Benny Pfitzner
> > Sent: 20 December 2006 17:15
> > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] Problem with WinXP install. Can
> > start but not connect via vnc
> >
> > Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan Worsley:
> > > Hi Benny,
> > >
> > > Benny Pfitzner wrote:
> > > > Hi,
> > > >
> > > > I run debian etch with xen packages provided by debian.
> > They are running
> > > > fine.
> > > > Today I tryed to install Windows XP. Here is my config:
> > > > ***********************************************
> > > > kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
> > > > builder = 'hvm'
> > > > memory = 512
> > > > name = "winxp"
> > > > vcpus = 1
> > > > vif = [ 'type=ioemu, bridge=xenbr0' ]
> > > > disk = [
> > 'file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w' ]
> > > > device_model = '/usr/lib/xen/bin/qemu-dm'
> > > > #cdrom='/dev/hda'
> > > > cdrom='/vserver/images/domains/winxp/winxp.iso'
> > > >
> > > The cdrom= lines had no effect for me, I think they're
> > obsolete now or
> > > something, instead I have a disk line that looks like this;
> > >
> > > disk = [ 'phy:/dev/sys_vg/windows_os,ioemu:hda,w',
> > > 'file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r' ]
> >
> > Thank you very much Ryan,
> >
> > you are totally right. They changed it in version 3.0.3.
> >
> > I added vncviewer=1 and sdl=1 to my configfile and started the domain
> > again.
> >
> > Then I automatically I got vncviewer running my WinXP install screen.
> > After formatting the image and so on Windows want's to reboot.
> >
> > Since then I don't have connection to the domain.
> >
> > I posted my netstat -l output here because I just can't find the port:
> > http://pastebin.ca/raw/286397
> >
> > My logs don't show anything regarding vnc.
> > Here is the output of the most recent qemu-log:
> > *************************************************
> > domid: 7
> > qemu: the number of cpus is 1
> > shared page at pfn:1ffff, mfn: 1d24b
> > buffered io page at pfn:1fffd, mfn: 1d24d
> > *************************************************
> >
> > Here I posted the last couple of lines from the xend.log file.
> > http://pastebin.ca/286403
>
> I bet you don't have a qemu-dm process for some reason... Try starting
> the domain from scratch (booting from the hard-disk, not CD-ROM this
> time).
>
> If starting it again doesn't work, can you show the qemu-log from the
> new vm?
>
> --
> Mats
> >
> >
> > Thanks Ben
> >
> > >
> > > > ne2000=0
> > > > boot='d'
> > > > vif = [ 'ip=192.168.0.205' ]
> > > > vnc=1
> > > > vncviewer=0
> > > >
> > > Do you not have to set vncviewer to 1 to get it create the
> > window for
> > > you? I personally used SDL instead (sdl=1). You also say
> > your domain
> > > is 17, I think when I experimented with VNC I found it to
> > create the
> > > listening port on something like 4017 or whatever. I used
> > netstat -l to
> > > find out what port it was actually on.
> > >
> > > Ben, lastly, could you check your /var/log/xen folder for error
> > > messages, specifically check the most recent qemu log.
> > >
> > > Thanks,
> > >
> > > Ryan.
> > > > ***********************************************
> > > >
> > > > When I try to start the domain it seems to run fine:
> > > > ***********************************************
> > > > pfitzner:/etc/xen# xm create winxp2
> > > > Using config file "winxp2".
> > > > Started domain winxp
> > > > ***********************************************
> > > >
> > > > But when I try to connect to the domain via vnc I get the
> > message that
> > > > the viewer can't connect:
> > > > ***********************************************
> > > > pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> > > > vncviewer: ConnectToTcpAddr: connect: Connection refused
> > > > Unable to connect to VNC server
> > > > ***********************************************
> > > >
> > > > P.S.:
> > > > 17 is the ID of the domain and I have a Intel Pentuim D with VT:
> > > > pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> > > > (XEN) VMXON is done
> > > > (XEN) VMXON is done
> > > >
> > > >
> > > > Does somebody might have a idea what I did do wrong?
> > > >
> > > > Tanks Ben
> > > >
> > > >
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > http://lists.xensource.com/xen-users
> > > >
> > >
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> >
> >
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home