Script started on Mon 13 Nov 2006 06:43:12 PM CET epaperweb93:~# xm create -c ha  xmprova8 Using config file "/etc/xen/xmprova8". Started domain hebe8 Linux version 2.6.16-xen (root@epaperweb93) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #2 SMP Wed Nov 8 18:46:34 CET 2006 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000004000000 (usable) 0MB HIGHMEM available. 72MB LOWMEM available. ACPI in unprivileged domain disabled IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/hda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 512 (order: 9, 8192 bytes) Xen reported: 2002.552 MHz processor. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Software IO TLB disabled vmalloc area: c5000000-fb7fe000, maxmem 33ffe000 Memory: 60936k/73728k available (2183k kernel code, 4536k reserved, 766k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4030.33 BogoMIPS (lpj=20151691) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI IA-32 Microcode Update Driver: v1.14-xen VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. blkif_init: reqs=64, pages=704, mmap_vstart=0xc3800000 netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Registering block device major 3 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new driver libusual mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 172k freed modprobe: FATAL: Could not open '/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko': No such file or directory INIT: version 2.86 booting Activating swap. Checking root file system... fsck 1.37 (21-Mar-2005) /: clean, 29493/610432 files, 132485/1220932 blocks Generic RTC Driver v1.07 select() to /dev/rtc to wait for clock tick timed out System time was Mon Nov 13 17:43:51 UTC 2006. Setting the System Clock using the Hardware Clock as reference... select() to /dev/rtc to wait for clock tick timed out System Clock set. System local time is now Mon Nov 13 17:44:08 UTC 2006. Cleaning up ifupdown...done. Calculating module dependencies... done. Loading modules... ide-cd FATAL: Module ide_cd not found. ide-detect FATAL: Module ide_detect not found. ide-disk FATAL: Module ide_disk not found. psmouse FATAL: Module psmouse not found. sbp2 SCSI subsystem initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance sr_mod All modules loaded. Checking all file systems... fsck 1.37 (21-Mar-2005) Setting kernel variables ... ... done. Mounting local filesystems... Cleaning /tmp /var/run /var/lock. Detecting hardware: Running 0dns-down to make sure resolv.conf is ok...done. Setting up networking...done. Starting hotplug subsystem: pci cat: /sys/bus/pci/devices/*/class: No such file or directory cat: /sys/bus/pci/devices/*/vendor: No such file or directory cat: /sys/bus/pci/devices/*/device: No such file or directory cat: /sys/bus/pci/devices/*/subsystem_vendor: No such file or directory cat: /sys/bus/pci/devices/*/subsystem_device: No such file or directory Bad PCI agent invocation pci [success] usb mount: usbfs already mounted or /proc/bus/usb busy mount: according to mtab, usbfs is already mounted on /proc/bus/usb USB Universal Host Controller Interface driver v2.3 usb [failed] isapnp isapnp [success] ide ide [success] input input [success] scsi scsi [success] done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...done. Starting portmap daemon: portmap. Setting the System Clock using the Hardware Clock as reference... select() to /dev/rtc to wait for clock tick timed out System Clock set. Local time: Mon Nov 13 18:44:30 CET 2006 Running ntpdate to synchronize clockInitializing random number generator...done. Recovering nvi editor sessions... done. Setting up X server socket directory /tmp/.X11-unix...done. Setting up ICE socket directory /tmp/.ICE-unix...done. INIT: Entering runlevel: 4 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. Starting portmap daemon: portmap. Starting MTA: exim4. Starting internet superserver: inetd. Starting printer spooler: lpd . Starting OpenBSD Secure Shell server: sshdCould not load host key: /etc/ssh/ssh_host_dsa_key . Starting NFS common utilities: statdNET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver . Starting deferred execution scheduler: atd. Starting periodic command scheduler: cron. Debian GNU/Linux 3.1 hebe8 tty1 hebe8 login: root   Password: Last login: Mon Nov 13 18:42:33 2006 on tty1 hebe8:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.0 * 255.255.128.0 U 0 0 0 eth0 default 10.10.10.12 0.0.0.0 UG 0 0 0 eth0 hebe8:~# halt    n ps -ax Warning: bad syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html PID TTY STAT TIME COMMAND 1 ? S 0:00 init [4] 2 ? S 0:00 [migration/0] 3 ? SN 0:00 [ksoftirqd/0] 4 ? S 0:00 [watchdog/0] 5 ? S< 0:43 [events/0] 6 ? S< 0:00 [khelper] 7 ? S< 0:00 [kthread] 8 ? S< 0:00 [xenwatch] 9 ? S< 0:00 [xenbus] 14 ? S< 0:00 [kblockd/0] 18 ? S< 0:00 [khubd] 56 ? S 0:00 [pdflush] 57 ? S 0:00 [pdflush] 59 ? S< 0:00 [aio/0] 58 ? S 0:00 [kswapd0] 575 ? S< 0:00 [kseriod] 653 ? S< 0:00 [kpsmoused] 788 ? S 0:00 [khpsbpkt] 1037 ? Ss 0:00 /sbin/portmap 1087 ? Ss 0:00 /sbin/syslogd 1090 ? Ss 0:00 /sb