I've installed Xen kernel for dom0 on a CentOS 4.4 but when i reboot
the kernel says:
_/\_\___|_| |_| |____(_)___(_)____(_)___/
http://www.cl.cam.ac.uk/netos/xenmdev = 59.12
University of Cambridge Computer Laboratory6 Sep 26 01:52
qemu-dm.6463.log
Xen version 3.0.3.0 (root@xxxxxxxxxxxxxxxx) (gcc version 3.4.6
20060404 (Red Hastart
qemu-
-rw-r--r-- 1 root root
t 3.4.6-3)) Mon Oct 16 09:30:20 EDT 2006 [ ok ]
Latest ChangeSet: unavailable
(XEN) Command line: /xen-3.gz com1=115200,8n1 dom0_mem=128M3: ping
iol.it
(XEN) Physical RAM map:-- 1 root root
(XEN) 000000001ffa8000 - 000000001ffb7c00 (ACPI data)
(XEN) 000000001ffb7c00 - 0000000020000000 (reserved)
-rw-r--r-- 1 root root 35788 Sep 26 17:19
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
00000000000A0000 - 00000
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
-rw-r--r-- 1 root root 1794
(XEN) System RAM: 511MB (523552kB)0000 (Reserved)
(XEN) Xen heap: 10MB (10428kB)
(XEN) PAE enabled, limit: 16 GB 2548
(XEN) found SMP MP-table at 000fe710 2211 Oct 18 13:10 qemu-dm.7116.log
(XEN) DMI 2.4 present.
(XEN) Using APIC driver defaultFFE000 - 000000000
(XEN) ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @
0x000f2b88Rom... 0 0 ?
(XEN) ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @
0x000f2c7c
-rw-r--r-- 1 root root 1886 Oct 21 17:04 qemu-dm
(XEN) ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @
0x000f2d5d unsupported int 16h function 03 0 ? S<
(XEN) ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @
0x000f2dad62.log ELDL=81
(XEN) ACPI: Local APIC address 0xfee00000t13_harddisk: function 41,
unmapped dev
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) root
36241 Oct 17 21:0 ?
(XEN) Processor #0 6:15 APIC version 201 root root 1887 Oct 21 17:06
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
-rw-r--r-- 1 root roo
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
2 pack
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] disabled)
S
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])oot root
1904 Sep 26 14:24 qemu-dm.8429.log
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ Applications found : 5
0000
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
-rw-r--r-- 1 root root 35642 Sep
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[e
at
-rw-r--r-
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])m...
Latest version av
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23harddisk: function 15, unmap
-rw-r
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[64])
(XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 64-87
-rw-r--r-- 1 root root
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)RG
int13_harddisk: funct
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
-rw-r--r-- 1 root root 3633
(XEN) Using ACPI (MADT) for SMP configuration information
-rw-r--r-- 1 root root 35214 Sep 26 02:28 qemu-
(XEN) Using scheduler: SMP Credit Scheduler (credit)
-rw-r--r-- 1 root root
(XEN) Initializing CPU#0mu-dm.9469.log
(XEN) Detected 1595.976 MHz processor.
-rw-r--r-- 1 root
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32Kog
(XEN) CPU: Physical Process
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1 root 35148 Oct 1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: Physical Processor ID: 06423 Oct 21 18:25 qemu-dm.9847.log
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done root 36471
(XEN) Intel machine check architecture supported.
-r
(XEN) Intel machine check reporting enabled o
(XEN) ENABLING IO-APIC IRQsmp 17901 Oct 1 15:30
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1
pin2=-1en-hotplug.log
(XEN) checking TSC synchronization across 2 CPUs: passed. Oct 21 16:01
xend-debug.log
(XEN) Platform timer is 14.318MHz HPET-r--r-- 1 root root 990595 Oct
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.t 1048323 Sep
27 20:07 xend.log.1
(XEN) *** LOADING DOMAIN 0 ***
-rw-r--r-- 1 roo
(XEN) Domain 0 kernel supports features = { 0000001f }.
xentoo log #
cated) login
(XEN) VIRTUAL MEMORY ARRANGEMENT:
Last login: Sat Oct 21
(XEN) Loaded kernel: c0100000->c047ccbcts/3
(XEN) Init. ramdisk: c047d000->c068a000 # ifconfig
eth0
(XEN) Phys-Mach map: c068a000->c06aa0002E:6B
(XEN) Start info: c06aa000->c06aa46c192.168.1.19 Bcast:192.168.1.255 Mask:
(XEN) Page tables: c06ab000->c06b4000
(XEN) Boot stack: c06b4000->c06b5000ICAST MTU:1500 Metric:1
(XEN) TOTAL: c0000000->c0800000
RX packets:5 errors:0 dro
(XEN) ENTRY ADDRE
RX bytes:326 (32
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.16 Memory:f4000000-f4011100
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen
inet addr:127.0.0.1 Mask:255.0.0.0
).
Linux version 2.6.16.29-xen_3.0.3.0 (root@endor) (gcc version 3.4.6
20060404 (Re:1
RX packets:0 erro
d Hat 3.4.6-3)) #1 SMP Mon Oct 16 09:30:17 EDT 2006
BIOS-provided physical RAM map: overruns:0 carrier:0
Xen: 0000000000000000 - 0000000008800000 (usable)
collisions:0 txqueuelen:0
0MB HIGHMEM available.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)195.210.91.83):
icmp_seq=1 ttl=118 time=63.1 ms
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
--- iol.it ping statistics
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)ted, 1 received, 0%
packet loss, time 0ms
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] disabled)t min/avg/max/mdev
= 63.143/63.143/63.143/0.000 ms
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)xentoo ~ # cd /opt/
xentoo opt #
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)-l
total 0
drwxr-xr-x 2 ro
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
drwxr-xr-x 4 root root 32 Oct 17
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] di
xentoo opt # cd /t
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])r
36K qemu-
proc on /proc t
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])sys type sysfs
(rw,nosuid,nodev,noexec)
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])ype tmpfs (rw,nosuid)
4.0K qemu-dm.10740.log
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])ec) of files:
44,780 kB:Local Loopback
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
usbfs
IOAPIC[0]: apic_id 2, version 32, address 0xf
Enabling unmasked SIMD FPU exception support... done.0K
qemu-dm.8700.log
xentoo backup-xentoo-
Initializing CPU#0stab
PID hash table entries: 1024 (order: 10, 16384 bytes)le system
information.
root tt
Xen reported: 1595.976 MHz processor.atimes for increased performance (ati
Console: colour VGA+ 80x25.log 0 123 2 r
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)eases
performance of ReiserFS (at the expense of storage13381.l
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)user, l
# efficiency). It's safe to drop the noatime option
Software IO TLB enabled:
Memory: 120332k/139264k available (1983k kernel code, 10576k reserved, 751k data
, 192k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3193.46 BogoMIPS (lpj=15967333)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 4096K
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
Enabling SMP...
Brought up 2 CPUs
Initializing CPU#1
migration_cost=20
checking if image is initramfs... it is
Freeing initrd memory: 2100k freed
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
and at this point freeze
Any ideas?
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home