Message got sent for adding the rest.
Fowwlowing the instructions
http://www.xensource.com/files/xen_install_windows.pdf
During WinXP install, it gets to the Personalize your settings, I enter
by name, then lockup of domU.
This is Xen 3.0.3 with FC6 running 2.6.18xen kernel on Intel 2 core duo
7600.
One thing in the pdf above, it says to set acpi=0. If I do this, Windows
does not even start.
The screen before the lockup where you enter time zone, etc, there are
two cursors, a white and block. The white, winxp, follows the black,
linux, but at variable distances. On the lockup screen, after entering
my name and it locks up (At least it does not lockup the whole machine
as in Suse 10.1) The windows cursor is frozen and no longer follows the
linux cursor. This is really strange. Any suggestions on what the
problem might be?
Here are the outputs from xm list and xmdmesg.
xm list
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 1489 2 r----- 741.0
winxp 4 500 2 ------ 386.2
xm dmesg
(XEN) (GUEST: 4) HVM Loader
(XEN) (GUEST: 4) Detected Xen v3.0.3-rc3-1.2798.f
(XEN) (GUEST: 4) Writing SMBIOS tables ...
(XEN) (GUEST: 4) Loading ROMBIOS ...
(XEN) (GUEST: 4) Creating MP tables ...
(XEN) (GUEST: 4) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 4) Loading ACPI ...
(XEN) (GUEST: 4) Loading VMXAssist ...
(XEN) (GUEST: 4) VMX go ...
(XEN) (GUEST: 4) VMXAssist (Oct 17 2006)
(XEN) (GUEST: 4) Memory size 500 MB
(XEN) (GUEST: 4) E820 map:
(XEN) (GUEST: 4) 0000000000000000 - 000000000009F000 (RAM)
(XEN) (GUEST: 4) 000000000009F000 - 00000000000A0000 (Reserved)
(XEN) (GUEST: 4) 00000000000A0000 - 00000000000C0000 (Type 16)
(XEN) (GUEST: 4) 00000000000F0000 - 0000000000100000 (Reserved)
(XEN) (GUEST: 4) 0000000000100000 - 000000001F3F0000 (RAM)
(XEN) (GUEST: 4) 000000001F3F0000 - 000000001F3FA000 (ACPI Data)
(XEN) (GUEST: 4) 000000001F3FA000 - 000000001F3FD000 (ACPI NVS)
(XEN) (GUEST: 4) 000000001F3FD000 - 000000001F3FE000 (Type 19)
(XEN) (GUEST: 4) 000000001F3FE000 - 000000001F3FF000 (Type 18)
(XEN) (GUEST: 4) 000000001F3FF000 - 000000001F400000 (Type 17)
(XEN) (GUEST: 4) 00000000FEC00000 - 0000000100000000 (Type 16)
(XEN) (GUEST: 4)
(XEN) (GUEST: 4) Start BIOS ...
(XEN) (GUEST: 4) Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) (GUEST: 4) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) (GUEST: 4) Remapping master: ICW2 0x8 -> 0x20
(XEN) (GUEST: 4) Remapping slave: ICW2 0x70 -> 0x28
(XEN) (GUEST: 4) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp
$
(XEN) (GUEST: 4) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07
15:55:26 $
(XEN) (GUEST: 4)
(XEN) (GUEST: 4) ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) (GUEST: 4) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (10200 MBytes)
(XEN) (GUEST: 4) ata0 slave: Unknown device
(XEN) (GUEST: 4) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) (GUEST: 4) ata1 slave: Unknown device
(XEN) (GUEST: 4)
(XEN) (GUEST: 4) Booting from CD-Rom...
(XEN) (GUEST: 4) unsupported PCI BIOS function 0x0E
(XEN) (GUEST: 4) int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) (GUEST: 4) *** int 15h function AX=E980, BX=00F2 not yet supported!
(XEN) hvm_vioapic_write_indirect: version register read only
(XEN) hvm_vioapic_write_indirect: version register read only
(XEN) hvm_vioapic_write_indirect: version register read only
(XEN) This hvm_vlapic is for P4, no work for De-assert init
(XEN) This hvm_vlapic is for P4, no work for De-assert init
(XEN) This hvm_vlapic is for P4, no work for De-assert init
(XEN) (file=hvm.c, line=661) AP 1 bringup suceeded.
(XEN) vmx_do_launch(): GUEST_CR3<=00fd77a0, HOST_CR3<=6886d000
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate c1
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 53
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
(XEN) (file=x86_emulate.c, line=1152) Cannot emulate 2b
[root@localhost xen]#
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home