[Xen-users] What does this mean?

[Art Fore <art.fore@xxxxxxxxx>]

System is default Suse 10.1 install with Xen 3.0.2 on Athlon 64 X2 AM2
soket.

Started the suse img from Live CD full virtualization. Supposed to have
output on screen, have nothing.

xm list
Name                              ID Mem(MiB) VCPUs State  Time(s)
Domain-0                           0     1739     2 r-----   281.0
suse                               1      256     1 -b----     0.0

XM dmesg

 Xen version 3.0.2_09763-0.8 (abuild@xxxxxxx) (gcc version 4.1.0 (SUSE
Linux)) Fri Oct  6 16:00:18 UTC 2006
 Latest ChangeSet: 09763

(XEN) Command line: /boot/xen.gz
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  000000000009fc00 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000007ffd0000 (usable)
(XEN)  000000007ffd0000 - 000000007ffde000 (ACPI data)
(XEN)  000000007ffde000 - 0000000080000000 (ACPI NVS)
(XEN)  00000000fec00000 - 00000000fec01000 (reserved)
(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
(XEN)  00000000ff780000 - 0000000100000000 (reserved)
(XEN) System RAM: 2047MB (2096572kB)
(XEN) Xen heap: 14MB (14528kB)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 ACPIAM                                ) @
0x00000000000fa950
(XEN) ACPI: RSDT (v001 A M I  OEMRSDT  0x06000602 MSFT 0x00000097) @
0x000000007ffd0000
(XEN) ACPI: FADT (v002 A M I  OEMFACP  0x06000602 MSFT 0x00000097) @
0x000000007ffd0200
(XEN) ACPI: MADT (v001 A M I  OEMAPIC  0x06000602 MSFT 0x00000097) @
0x000000007ffd0390
(XEN) ACPI: MCFG (v001 A M I  OEMMCFG  0x06000602 MSFT 0x00000097) @
0x000000007ffd0400
(XEN) ACPI: OEMB (v001 A M I  AMI_OEM  0x06000602 MSFT 0x00000097) @
0x000000007ffde040
(XEN) ACPI: DSDT (v001  1ADGH 1ADGH000 0x00000000 INTL 0x02002026) @
0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:11 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:11 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) ACPI: IRQ15 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 2000.059 MHz processor.
(XEN) CPU0: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 0(2) -> Core 0
(XEN) AMD SVM Extension is enabled for cpu 0.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU1: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 1(2) -> Core 1
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD SVM Extension is enabled for cpu 1.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
(XEN) ...trying to set up timer as ExtINT IRQ...spurious 8259A
interrupt: IRQ7.
(XEN)  works.
(XEN) checking TSC synchronization across 2 CPUs:
(XEN) CPU#0 had 28 usecs TSC skew, fixed it up.
(XEN) CPU#1 had -28 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000000f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000003000000->0000000004000000 (477772 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff80464108
(XEN)  Init. ramdisk: ffffffff80465000->ffffffff80a92600
(XEN)  Phys-Mach map: ffffffff80a93000->ffffffff80e40260
(XEN)  Start info:    ffffffff80e41000->ffffffff80e42000
(XEN)  Page tables:   ffffffff80e42000->ffffffff80e4d000
(XEN)  Boot stack:    ffffffff80e4d000->ffffffff80e4e000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81000000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0x62d600, start at 0xffffffff80465000
(XEN) Scrubbing Free RAM: .....................done.
(XEN) Xen trace buffers: disabled
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).

Art




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users