| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] 3.0.2 seems not to create bridge
Harm Weites wrote:
hi list members,
I have been busy with this problem since yesterday and im really stuck now.
The Dom0 is a clean Debian Etch install (yeah, the upcoming stable
release). I use linux-image-2.6.16-2-xen-686 with xen-hypervisor-3.0.2
It all boots ok and i have created two filebased debian images to start
as DomU.
Here's the problem: the bridge scripts doesnt seem te be executed. When
i create a DomU without a vif line all is fine, except that i havent got
networking. When i enable the vif line its stalls and eventually fails
and says it cant connect vifsomething.
Looking up some info with ifconfig/brctl tells me much more: I dont have
peth0 and brctl show nothing, eg. there is NO bridge created.
I have been working with Xen on another host (sarge+xen from backports)
and that worked perfectly. Its just due to the hardware i have to use Etch.
Have a look at /usr/share/doc/xen-hypervisor-3.0.2/README.Debian
By default xen on etch makes no changes to the network configuration.
You can easily add your bridge in /etc/network/interfaces.
Regards,
Bjoern
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home