RE: [Xen-users] Newbie: Can't boot vm1

["Ben Schmidt" <janedoe200@xxxxxxxxxxx>]

> From: "Petersson, Mats" <Mats.Petersson@xxxxxxx>
> To: "Ben Schmidt" <janedoe200@xxxxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Newbie: Can't boot vm1
> Date: Wed, 4 Oct 2006 15:01:38 +0200
>
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> > Ben Schmidt
> > Sent: 04 October 2006 13:53
> > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: [Xen-users] Newbie: Can't boot vm1
> >
> > Hi,
> >
> > I use Debian etch (Testing) on my Machine running
> > 2.6.17-2-xen-686 kernel
> > from etch. I tryed to set up vm1 in xen. Here is my config:
> > ****************************************
> > kernel = "/boot/vmlinuz-2.6.17-2-xen-686"
> > memory = 128
> > name = "xenvm1"
> > disk = [ 'file:/var/images/vm1disk,sda1,w',
> > 'file:/var/images/vm1swap,sda2,w' ]
> > root = "/dev/sda1 ro"
> > ****************************************
> >
> > here is my /etc/fstab for the vm:
> > ****************************************
> > /dev/sda1       /       ext3    errors=remount-ro       0       1
> > /dev/sda2       none    swap    sw                      0       0
> > proc            /proc   proc    defa ults                0       0
> > ****************************************
>
> And you've formatted your vm1disk as ext3?
> Can you mount the /var/images/vm1disk with the loop-back protocol?
I can mount the disk with <mount -o loop /var/images/vm1disk /mnt/disk> and 
allready installed a mini sarge system the debootstrap and edited /etc/fstab 
and so on.
Any Ideas?
Thanks

Ben

> --
> Mats
> >
> > /boot/vmlinuz-2.6.17-2-xen-686, /var/images/vm1disk and
> > /var/images/vm1swap
> > are there and I can chroot to /var/images/vm1disk without any
> > problems.
> >
> > When I try to boot the Mashine I get the message that the
> > kernel can't find
> > the Partition:
> > ****************************************
> > NET: Registered protocol family 20
> > Using IPI No-Shortcut mode
> > Registering block device major 8
> > No filesystem could mount root, tried:  cramfs
> > Kernel panic - not syncing: VFS: Unable to mount root fs on
> > unknown-block(8,1
> > ****************************************
> > You can find the whole output at: http://pastebin.ca/raw/190905
> >
> > Could somebody please explain what I did do wrong. I really want to
> > understand that the Problem is.
> >
> > Thank
> >
> > Ben
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> >
> >
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users