[Xen-users] Re: Xen 3.0.2 install issues

[Randall Smith <randall@xxxxxx>]

I think you need to create an initrd image like this:

        sudo update-initramfs -c -k 2.6-xen

Then update your grub entry:

        sudo update-grub

That should (hopefully) make your scsi driver available at boot.  Hope 
that helps.
Randall

edalB wrote:
> Hi all
>
> I am trying to install Xen 3.0.2 The installation went well no errors
> what so ever.
> Exept when I try to boot with the new xen server I get error something
> in the line "Cant find root= Partition"
>
> It flashes past so fast.
>
> The hardeware I am using is a Duel Xeon 2.40 with 2 GIG mem and a
> Compaq Smart Array 5322
>
> My menu.lst file has the following lines in for the
>
> title Xen 3.0.2 / XenLinux 2.6.16
> kernel /xen.gz
> module /vmlinuz-2.6-xen root=/dev/cciss/c0d0p3 ro console=tty0
>
> When I do a dmesg this is a output I get for the scsi devises
>
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>        <Adaptec aic7899 Ultra160 SCSI adapter>
>        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
> scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>        <Adaptec aic7899 Ultra160 SCSI adapter>
>        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
>
> and
>
> HP CISS Driver (v 2.4.52)
> cciss: Device 0xb060 has been found at bus 1 dev 8 func 0
>      blocks= 426784320 block_size= 512
>      heads= 255, sectors= 32, cylinders= 52302 RAID 5
>
> Now I think the problem is with the HP CISS Driver in the xen kernel
> But I dont know where to find it and to add it as a module for the xen
> kernal
>
> Just a note I got all this information after booting back into the
> debian kernal.
>
> Regards
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users