| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
[Xen-users] Fw:Xend start and after lose network
Objet : Xend start and after lose network
Hi everybody :
My configuration :
Dapper 6.06 LTS with all updates
Xen 3.0.2.2
My problem :
After making 'xend start', I lose network connections between
my server and local network or internet.
Nota : domU cas normally access to network
I read about a similar problem in the bugtracker (N. 62) but
it seems that this is normally corrected in xen 3.0.2.2. I
read some messages about similar problems but found no solution.
Some help would be really appreciated
Thanks a lot
Some data
ifconfig before xend start
----------------------------
eth0 Lien encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet adr:192.168.0.250 Bcast:192.168.0.255
Masque:255.255.255.0
adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:32 erreurs:0 :0 overruns:0 frame:0
TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:3903 (3.8 KiB) Octets transmis:5237
(5.1 KiB)
Interruption:11 Adresse de base:0xe000
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:5 erreurs:0 :0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:272 (272.0 b) Octets transmis:272 (272.0 b)
ifconfig after xend start
-------------------------
eth0 Lien encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet adr:192.168.0.250 Bcast:192.168.0.255
Masque:255.255.255.0
adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:21 erreurs:0 :0 overruns:0 frame:0
TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:4801 (4.6 KiB) Octets transmis:2322
(2.2 KiB)
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:23 erreurs:0 :0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:1904 (1.8 KiB) Octets transmis:1904
(1.8 KiB)
peth0 Lien encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
Packets reçus:95 erreurs:0 :0 overruns:0 frame:0
TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:11104 (10.8 KiB) Octets transmis:8069
(7.8 KiB)
Interruption:11 Adresse de base:0xe000
vif0.0 Lien encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:53 erreurs:0 :0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:2322 (2.2 KiB) Octets transmis:4969
(4.8 KiB)
xenbr0 Lien encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
adr inet6: fe80::200:ff:fe00:0/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:116 erreurs:0 :0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:7881 (7.6 KiB) Octets transmis:468
(468.0 b)
dmesg after xend start
--------------------------------
Bridge firewalling registered
0000:00:0d.0: tulip_stop_rxtx() failed
device vif0.0 entered promiscuous mode
xenbr0: port 1(vif0.0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
peth0: Promiscuous mode enabled.
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
eth0: duplicate address detected!
0000:00:0d.0: tulip_stop_rxtx() failed
peth0: Setting full-duplex based on MII#1 link partner
capability of 45e1.
peth0: no IPv6 routers present
xenbr0: no IPv6 routers present
vif0.0: no IPv6 routers present
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
vif0.0: received packet with own address as source address
printk: 1 messages suppressed.
vif0.0: received packet with own address as source address
printk: 2 messages suppressed.
Cet été, pensez aux cartes postales de laposte.net !
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
| <Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Xen-users] Fw:Xend start and after lose network,
lflesch\.domicile\@laposte\.net <=
|
|
|
| |
|
Home