| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Assign IP's
On 8/7/06, postmaster/info <info@xxxxxxxxxxxxxxx> wrote:
What kind of error message did you get? And what did you try? Don't forget
to put a vif = [' '] statement in your xen config file else there won't be a
nic present in your domU. So please post your xen config file, lspci of domU
and relevant parts of dmesg are welcome. Please check for typos I spend two
days grumbling because I copied a typo from a not working example.
Greetings,
Sjoerd de Heer
S&R Solutions
> -----Oorspronkelijk bericht-----
> Van: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
> bounces@xxxxxxxxxxxxxxxxxxx] Namens Kaushal Shriyan
> Verzonden: maandag 7 augustus 2006 15:16
> Aan: xen-users@xxxxxxxxxxxxxxxxxxx
> Onderwerp: Re: [Xen-users] Assign IP's
>
> On 8/7/06, postmaster/info <info@xxxxxxxxxxxxxxx> wrote:
> > Just like you normally do. /etc/sysconfig/network and
> > /etc/sysconfig/network-scripts/ifcfg-eth0 Or use dhcp and assign a mac
> > address in the xen config file for vm02. Browse the list for some
> examples.
> >
> > Sjoerd de Heer
> > S&R Solutions
> >
> > > -----Oorspronkelijk bericht-----
> > > Van: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
> > > bounces@xxxxxxxxxxxxxxxxxxx] Namens Kaushal Shriyan
> > > Verzonden: maandag 7 augustus 2006 14:43
> > > Aan: xen-users@xxxxxxxxxxxxxxxxxxx
> > > Onderwerp: [Xen-users] Assign IP's
> > >
> > > Hi ALL
> > >
> > > I did it all partition. everything is cool.
> > > i installed centos too.
> > > i dont know how to assign ip for my centos let me know the same.
> > >
> > > xm list
> > > Name ID Mem(MiB) VCPUs State Time(s)
> > > Domain-0 0 256 1 r----- 123.5
> > > vm02 16 96 1 -b---- 12.2
> > >
> > > Kaushal
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> >
> >
> Hi Sjoerd de Heer
>
> It didnot worked, can you point me to the exact steps Please
>
> Thanks and Regards
>
> Kaushal
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
Hi Sjoerd de Heer
How do i set vif in the xen config file
[root@localhost etc]# xm list
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 256 1 r----- 34.2
vm02 2 96 1 -b---- 5.2
ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:76:08:17:55
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:76ff:fe08:1755/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2444 errors:0 dropped:0 overruns:0 frame:0
TX packets:1755 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:403081 (393.6 KiB) TX bytes:159337 (155.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5034 (4.9 KiB) TX bytes:5034 (4.9 KiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:2437 errors:0 dropped:0 overruns:0 frame:0
TX packets:1774 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:403748 (394.2 KiB) TX bytes:166515 (162.6 KiB)
Interrupt:20 Base address:0xde00
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1755 errors:0 dropped:0 overruns:0 frame:0
TX packets:2446 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:159337 (155.6 KiB) TX bytes:403249 (393.7 KiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:977 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:243833 (238.1 KiB) TX bytes:468 (468.0 b)
CentOS release 4.3 (Final)
Kernel 2.6.16-xen3_86.1_rhel4.1 on an i686
localhost login: root
Password:
Last login: Sun Aug 6 16:26:12 on tty1
-bash-3.00# ls
-bash-3.00# ifconfig
-bash-3.00#
unable to add ip.
Kaushal
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home