This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Home Products Support Community News


[Xen-users] wake on lan does not work under xen 3.0.2

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] wake on lan does not work under xen 3.0.2
From: "Dieter Edinger (WEB.DE)" <dieter.edinger@xxxxxx>
Date: Mon, 31 Jul 2006 20:26:00 +0200
Delivery-date: Wed, 02 Aug 2006 02:22:04 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Thunderbird (Windows/20060719)

I have an onboard network adapter. It works with kernel module via_rhine.
Before shutdown I set the wol to g by command: ethtool -s eth0 wol g
When I look at the settings, they are ok. This is with kernel 2.6.16 under gentoo.
localhost ~ # ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000001 (1)
        Link detected: yes

When I try the same under the xen-Kernel using peth0 the output is the same except of peth0 instead of eth0, but I cannot wake up the server via wol.


Xen-users mailing list

<Prev in Thread] Current Thread [Next in Thread>