I'm new to Xen. It's taken me a few days (!) just to get xen to boot. I
kept getting the following error:
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
even when I used an initrd image. In the end I tried using mkinitramfs,
and the resulting image worked.
Why should this be? Nearly every howto I read suggests mkinitrd, yet
only mkinitramfs works on my system.
The following are the details of what I did:
-------------------------------------------------------------------------------------
I downloaded the xen-unstable source and built it using:
# make world
# make install
and I added the following to the grub menu:
title Xen 3.0 / XenLinux 2.6
root (hd0,1)
kernel /boot/xen-3.0-unstable.gz dom0_mem=262144 noreboot
module /boot/vmlinuz-2.6.16-3-xen root=/dev/sda2 ro console=tty0
For reference, this is the grub entry for my default kernel (not Xen) -
I use Debian etch with a custom-built kernel:
title Debian GNU/Linux, kernel 2.6.17.4-eir
root (hd0,1)
kernel /boot/vmlinuz-2.6.17.4-eir root=/dev/sda2 ro
initrd /boot/initrd.img-2.6.17.4-eir
savedefault
boot
When I reboot and choose Xen from the grub menu, it crashes. The
following are the last few lines in the log (I had to type these by hand
- I don't konw how else to get the log - I don't think I have the
hardware needed to set up a terminal via serial link):
md: Autodetecting RAID arrays
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "sda2" or unknown-block(0,0)
Please append correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
I read this list and thought that maybe it's because the kernel doesn't
have the correct SATA driver. I think I need module sata_nv, and this is
listed as a module in the config file /boot/config-2.6.16.13-xen.
I also read somewhere that I have to use mkinitrd to create an initrd
file otherwise modules won't be loaded, so I exectued the following
commands:
# depmod 2.6.16.13-xen
# mkinitrd -o /boot/initrd.img-2.6.16.13.xen 2.6.16.13-xen
and I also added the following line to the Xen grub entry:
module /boot/initrd.img-2.6.16.13.xen
but still I got a crash with the following lines:
md: Autodetecting RAID arrays
md: autorun ...
md: ... autorun DONE.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 5184KiB [1 disk] into ram disk... done.
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Finally, I ran the following:
# depmod 2.6.16.13-xen
# mkinitramfs -k -o /boot/initramfs.img-2.6.16.13.xen 2.6.16.13-xen
and then added the follwing to grub:
module /boot/initramfs.img-2.6.16.13.xen
and Xen successfully booted on restart.
------------------------------------------------------------------------------
Thanks,
Yasir
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home