RE: [Xen-users] dom0, vifs, eths and asterisk

["John Cianfarani" <jcianfarani@xxxxxxxxxx>]

If you comment out the "(network-script network-bridge)" it will prevent
the bridge from coming up as well as eth0 being mapped to peth0.  (You
will need to create your own bridges yourself).

I've managed to get asterisk and zaptel installed though you need to
recompile the kernels (xen0/U) to have a 1000hz timer freq.
I have not tried any hardware cards in a domU.

Thanks
John

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Jason
Sent: Friday, March 17, 2006 12:18 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] dom0, vifs, eths and asterisk

I haven't had much luck googling for this, but Im starting to suspect
that
I just don't have the right search terms.  When you boot a dom0 kernel,
you get around 8 network interfaces in addition to the usual eth0. When
you boot a domU kernel, you get only what you specify. Since I have some
driver domains that require a dom0 kernel but don't require all the
vifs,
is their a way to boot a dom0 without all of the virtual interfaces?

Secondly, has anyone had much luck installing asterisk and the zaptel
drivers on the 3.0 code?


-- 
Jason
The place where you made your stand never mattered,
only that you were there... and still on your feet

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users