[Xen-users] networking issue for beginners

["md" <md@xxxxxxxxxxxxx>]

Hi List,

 

sorry for bothering you with this issue again - but I don't understand the networking stuff at all.....

 

I treid to understand and follow http://lists.xensource.com/archives/html/xen-users/2005-08/msg00315.html...

 

However - I managed to build my custom kernels (dom0 with LVM, domFW as priviledged domain to be my firewall and a domU kernel for all my guests).

 

Also I understood that testing is the release to choose becauseI would like to use personalised bridges. (btw, how do I patch files as http://xenbits.xensource.com/xen-unstable.hg?cmd=changeset;node=95f84e37c90d573dd01cc29db5b81ffb5f86f84a didn't work for as I learned to patch...) 

 

 

I hide the 2nd pci devices of my machine from dom0 and attached them to my FW domain

 

lspci in dom0 broght:

 

0000:02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
0000:02:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)

 

So I modified menu.lst as:

 

title   Xen 3.0 / XenLinux 2.6
kernel  /xen-3.0.gz dom0_mem=262144 physdev_dom0_hide=(02:09.1)
module  /vmlinuz-2.6-xen root=/dev/md2 ro console=tty0
module  /initrd.2.6.12.6-xen.img

 

ifconfig in dom0:

 

eth0      Link encap:Ethernet  HWaddr 00:E0:81:30:A5:CE
          inet addr:192.168.100.99  Bcast:192.168.100.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:81ff:fe30:a5ce/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:891 errors:0 dropped:0 overruns:0 frame:0
          TX packets:666 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:78504 (76.6 KiB)  TX bytes:96772 (94.5 KiB)

 

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:202 (202.0 b)  TX bytes:202 (202.0 b)

 

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:878 errors:0 dropped:0 overruns:0 frame:0
          TX packets:664 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:82832 (80.8 KiB)  TX bytes:99338 (97.0 KiB)
          Interrupt:24

 

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:666 errors:0 dropped:0 overruns:0 frame:0
          TX packets:892 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:96772 (94.5 KiB)  TX bytes:78594 (76.7 KiB)

 

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:27 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1544 (1.5 KiB)  TX bytes:378 (378.0 b)

my domU (ppriviledged firewall) config looks like:

# Kernel image file.
kernel = "/boot/vmlinuz-2.6.12.6-xen0-FW"

 

# Initial memory allocation (in megabytes) for the new domain.
memory = 64

 

# A name for your domain. All domains must have different names.
name = "Firewall"

pci = [ '02,09,1' ]

 

vif = [

'mac=ff:fe:00:00:00:01, ip=192.168.100.130, bridge=isp0, vifname=isp0.0',

'mac=ff:fe:00:00:00:02, ip=192.168.100.131, bridge=LAN, vifname=LAN0.0',

'mac=ff:fe:00:00:00:03, ip=192.168.100.132, bridge=DMZ, vifname=DMZ0.0' ]

 

disk = [ 'file:/opt/xen/domains/xen1.img,sda1,w', 'file:/opt/xen/domains/xen1.swap,sda2,w' ]

 

Well - fire up my firewall leads to:

Error: Error creating domain: (38, 'Function not implemented')

and xend-debug.log shows:

Traceback (most recent call last):
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/server/SrvDomainDir.py", line 77, in op_create
    dominfo = self.xd.domain_create(config)
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomain.py", line 226, in domain_create
    dominfo = XendDomainInfo.create(config)
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py", line 182, in create
    vm.initDomain()
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py", line 1199, in initDomain
    self.createDevices()
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py", line 1338, in createDevices
    self.createDevice(n, c)
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/XendDomainInfo.py", line 975, in createDevice
    return self.getDeviceController(deviceClass).createDevice(devconfig)
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/server/DevController.py", line 80, in createDevice
    (devid, back, front) = self.getDeviceDetails(config)
  File "/usr/src/xen-unstable/dist/install/usr/lib/python/xen/xend/server/pciif.py", line 75, in getDeviceDetails
    enable = True)
error: (38, 'Function not implemented')
~

I guess I missed a few things....

 

How does xen know, that there are bridges called isp0, LAN and DMZ?

Anything about dummy devices that I forgott?

 

 

Any help would be highly appreciated...

 

thanx

 

Mat

 

icq 49761472

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users