[Xen-users] domU network doesn't get IP

[Jayesh Salvi <jayeshsalvi@xxxxxxxxx>]

Hi,

I have started domU successfully. I am using the default xend-config.sxp, it uses (network-script network-bridge). But my domU doesn't get any IP information, and it's disconnected from dom0 and rest of the world.

While booting domU, I get the following message:
...
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:
Determining IP information for eth0... failed.
[FAILED]
....

At the same time, my /var/log/xen-
hotplug.log records:

xenstore-read: couldn't read path backend/vbd/5/777/physical-device
xenstore-read: couldn't read path backend/vif/5/0/ip
xenstore-read: couldn't read path backend/vif/5/0/bridge
xenstore-read: couldn't read path backend/vbd/5/777/physical-device

My xm top looks like:
xentop - 11:34:45   Xen 3.0.0
2 domains: 1 running, 1 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown
Mem: 654652k total, 591216k used, 63436k free    CPUs: 1 @ 1295MHz
      NAME  STATE   CPU(sec) CPU(%)     MEM(k) MEM(%)  MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) SSID
  Domain-0 -----r       3598    2.1     505872   77.3   no limit       n/a     1    8     5484    73881    0
Net0 RX: 75654769bytes   822377pkts        0err        0drop  TX:  5616372bytes    25553pkts        0err        0drop
Net1 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
Net2 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
Net3 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
Net4 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
Net5 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
Net6 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
Net7 RX:        0bytes        0pkts        0err        0drop  TX:        0bytes        0pkts        0err        0drop
  MyDomain --b---         14    0.0      65508   10.0      65536      10.0     1    1        2     1547    0
Net0 RX:  1584924bytes    24430pkts        0err      701drop  TX:     2394bytes        7pkts        0err        0drop

My ifconfig look like:
(Also I don't understand where the domU gets its MAC address 00:16:3E:56:79:71? Could anyone explain that as well?)
On domU -
[root@localhost netplug]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:3E:56:79:71
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:25470 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1652542 (1.5 MiB)  TX bytes:2394 (2.3 KiB)

lo        Link encap:Local Loopback
          inet addr:
127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:560 (560.0 b)  TX bytes:560 (560.0 b)

On dom0 -
[root@orion xen]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0B:DB:DA:D6:42
          inet addr:
24.118.198.46  Bcast:255.255.255.255  Mask:255.255.254.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:823139 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25570 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:75712922 (72.2 MiB)  TX bytes:5620455 (
5.3 MiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:136 errors:0 dropped:0 overruns:0 frame:0
          TX packets:136 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:32709 (31.9 KiB)  TX bytes:32709 (31.9 KiB)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:823121 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25587 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:79025183 (75.3 MiB)  TX bytes:5767221 (5.5 MiB)
          Interrupt:11

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:25570 errors:0 dropped:0 overruns:0 frame:0
          TX packets:823139 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:5620455 (5.3 MiB)  TX bytes:75712922 (
72.2 MiB)

vif5.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25173 errors:0 dropped:704 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2394 (2.3 KiB)  TX bytes:1632487 (1.5 MiB)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:793251 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:40130862 (38.2 MiB)  TX bytes:0 (
0.0 b)


pings from domU to outside world/dom0 IP fail. 

I read networking issues in archives and other tutorials, but haven't yet found any solution.

Can anyone tell me what might be going wrong? Or at least where should I look to probe further?

Thanks a lot.

Jayesh

-- 
Jayesh

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users