Looking at your output..try booting Xen with command line perameter
"acpi=off" and see what happens.
On Thu, 2005-12-15 at 13:31 +0000, Randolph Oliveira wrote:
> Hello!
>
> I`m trying to boot a via sata machine with xen 3.0
> with no sucess. It just freezes at this point:
>
> *********
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] ->
> GSI 10 (level,low) -> IRQ 10
> sata_via (0000:00:0f.0): routed to hard irq line 10
> ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma
> 0xEF90 irq 10
> ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma
> 0xEF98 irq 10
> ata1: dev 0 ATA, max UDMA/133, 156301488 sectors:
> lba48
> *********
>
> and then only a hard reset modifies this state. the
> hard disc seems to be detected but i don`t have a clue
> what`s going on. I`ve beeing running xen 2.0.7 on this
> machine without any problems. Below is attached a
> lspci output:
>
> lspci:
>
> 0000:00:00.0 Host bridge: VIA Technologies, Inc.
> VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237
> PCI Bridge
> 0000:00:0f.0 RAID bus controller: VIA Technologies,
> Inc. VIA VT6420 SATA RAID Controller (rev 80)
> 0000:00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master
> IDE (rev 06)
> 0000:00:10.0 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.1 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.2 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.3 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.4 USB Controller: VIA Technologies, Inc.
> USB 2.0 (rev 86)
> 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237
> ISA bridge [K8T800 South]
> 0000:00:11.5 Multimedia audio controller: VIA
> Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
> Controller (rev 60)
> 0000:00:12.0 Ethernet controller: VIA Technologies,
> Inc. VT6102 [Rhine-II] (rev 78)
> 0000:01:00.0 VGA compatible controller: nVidia
> Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)
>
> Any help is appreciated!
>
> Thanks,
> Randolph
>
>
>
>
>
>
>
>
> _______________________________________________________
> Yahoo! doce lar. Faça do Yahoo! sua homepage.
> http://br.yahoo.com/homepageset.html
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home