I too am having a similar issue. It actually occurred with and with out LVM,
the common denominator was Software RAID 1. I used both the RPM install and
the scripted RPM install. I also rebuild the initrd just to make sure it
wasn't missing something, but as you can see in the dmesg it looks like it's
picking up the modules/drivers for everything. Running CentOS 4.2 and
everything boots find with the standard kernel. Hardware is a Pentium 4 D
3.0MHz, Intel 945G chipset, dual SATA Hatachi Drives, and 4GB ram, if any
of that matters.
Any help would be greatly appreciated, I'd consider going over to Fedora if
I thought it would matter but I'm thinking it probably wont.
Here's the output of my DMESG:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /xen-3.gz com1=115200,8n1
[Multiboot-elf, <0x100000:0x631ec:0x2be14>, shtab=0x18f078,
entry=0x100000]
module /vmlinuz-2.6.12.6-xen3_2.1_rhel4.1 root=/dev/xenvg/dom0_root ro
maxcpus=
1 console=tty1 console=ttyS0,115200n8
[Multiboot-module @ 0x190000, 0x338f50 bytes]
module /initrd-2.6.12.6-xen3_2.1_rhel4.1.img
[Multiboot-module @ 0x4c9000, 0x218200 bytes]
__ __ _____ ___ ___
\ \/ /___ _ __ |___ / / _ \ / _ \
\ // _ \ '_ \ |_ \| | | | | | |
/ \ __/ | | | ___) | |_| | |_| |
/_/\_\___|_| |_| |____(_)___(_)___/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0.0 (rread@xxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.3 20050227
(Red
Hat 3.4.3-22.1)) Sun Dec 4 10:31:20 PST 2005
Latest ChangeSet: unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdf0000 (usable)
(XEN) 00000000cfdf0000 - 00000000cfe00000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 3325MB (3405372kB)
(XEN) Xen heap: 10MB (10588kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000f35d0
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: Unable to locate RSDP
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
(XEN) Processor #0 15:4 APIC version 17
(XEN) Processor #1 6:1 APIC version 17
(XEN) I/O APIC #4 Version 17 at 0xFEC00000.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Processors: 2
(XEN) Initializing CPU#0
(XEN) Detected 2992.659 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=0
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_B
ASE=0xC0000000,PAE=no,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 03000000->04000000 (805491 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04752c0
(XEN) Init. ramdisk: c0476000->c068e200
(XEN) Phys-Mach map: c068f000->c09a59cc
(XEN) Start info: c09a6000->c09a7000
(XEN) Page tables: c09a7000->c09ab000
(XEN) Boot stack: c09ab000->c09ac000
(XEN) TOTAL: c0000000->c0c00000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Initrd len 0x218200, start at 0xc0476000
(XEN) Scrubbing Free RAM: ..................................done.
(XEN) Xen trace buffers: disabled
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen
).
Linux version 2.6.12.6-xen3_2.1_rhel4.1
(rread@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Sun Dec 4 10:45:29
PST
2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000c5a73000 (usable)
2338MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at 000f35d0
DMI 2.3 present.
ACPI: Unable to locate RSDP
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #4 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
IRQ lockup detection disabled
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
Built 1 zonelists
Kernel command line: root=/dev/xenvg/dom0_root ro maxcpus=1 console=tty1
console
=ttyS0,115200n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Xen reported: 2992.658 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Bus range: 0x0000000040000000 - 0x0000000044000000
Kernel range: 0x00000000c29e8000 - 0x00000000c69e8000
vmalloc area: f4800000-fb7fe000, maxmem 34000000
Memory: 3134948k/3246540k available (2184k kernel code, 102236k reserved,
883k d
ata, 184k init, 2394572k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
ENABLING IO-APIC IRQs
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 2144k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 21
Grant table initialized
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:pio, hdb:DMA
hdb: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ehci_hcd 0000:00:1d.7: Intel Corporation I/O Controller Hub EHCI USB
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Freeing unused kernel memory: 184k freed
Red Hat nash version 4.2.1.6 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading scsi_mod.ko module
scsi_mod: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ata_piix.ko module
ata1: SATA max UDMA/133 cmd 0xF700 ctl 0xF602 bmdma 0xF300 irq 19
ata2: SATA max UDMA/133 cmd 0xF500 ctl 0xF402 bmdma 0xF308 irq 19
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ata1: dev 0 ATA, max UDMA/100, 321672960 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
ata2: dev 0 ATA, max UDMA/100, 321672960 sectors: lba48
ata2: dev 0 configured for UDMA/100
scsi1 : ata_piix
Vendor: ATA Model: HDS722516VLSA80 Rev: V34O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: ATA Model: HDS722516VLSA80 Rev: V34O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Loading dm-mod.ko module
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Loading md.ko module
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Loading raid1.ko module
md: raid1 personality registered as nr 3
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
raidautorun: RAID_AUTORUN failed: 19
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
cdrom: open failed.
No volume groups found
Activating logical volumes
cdrom: open failed.
Unable to find volume group "xenvg"
ERROR: /bin/lvm exited abnormally! (pid 794)
Creating root device
Mounting root filesystem
mount: error 6 mounting ext2
mount: error 2 mounting none
Switching to new root
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init!
(XEN) Domain 0 shutdown: rebooting machine.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home